Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
TIP: Cleaning header socket for .5mm thick, 1mm spacing ribbon
29 views
Skip to first unread message
N_Cook
Sep 10, 2015, 4:06:12 AM9/10/15
to
0.5mm thick PTFE , but any soft plastic would do probably.
With a fine needle make, as closely spaced as you can, random holes at
the straight edge of the plastic, so the reverse looks like a cheese
grater. Immerse the grater-end in some meths or similar and insert a few
times into the socket. And also clean the end of the ribbon of course.
With a fine needle make, as closely spaced as you can, random holes at
the straight edge of the plastic, so the reverse looks like a cheese
grater. Immerse the grater-end in some meths or similar and insert a few
times into the socket. And also clean the end of the ribbon of course.
Cydrome Leader
Sep 11, 2015, 5:29:48 PM9/11/15
to
choice, insert and remove a couple times?
N_Cook
Sep 12, 2015, 3:09:49 AM9/12/15
to
to resist the insertion force.
Cydrome Leader
Sep 14, 2015, 6:52:25 PM9/14/15
to
0 new messages