info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Ar+ laser Tube
28 views
Skip to first unread message
ذكريات حسن
Jan 27, 2016, 5:53:16 PM1/27/16
to
This is Thekrayat and a grad student at the University of Arkansas
I am working with an old Argon ion laser, so Coherent company is not support this product an more.
The problem with this laser is that the Cathode current is decreased to 27 A then the laser is turning off by itself with " Fired starter 5x" fault massage. The technical support thinks that the laser tube is old and need to replace by a new one.
I have checked the water level, interlock, and tube pressure, and every thing is ok. Also, I think there is no problem with the resistance of the four fuses in the power supply.
Is there any way to fix this laser without changing the laser tube?
Thanks
I am working with an old Argon ion laser, so Coherent company is not support this product an more.
The problem with this laser is that the Cathode current is decreased to 27 A then the laser is turning off by itself with " Fired starter 5x" fault massage. The technical support thinks that the laser tube is old and need to replace by a new one.
I have checked the water level, interlock, and tube pressure, and every thing is ok. Also, I think there is no problem with the resistance of the four fuses in the power supply.
Is there any way to fix this laser without changing the laser tube?
Thanks
gghe...@gmail.com
Jan 29, 2016, 4:07:04 PM1/29/16
to
http://www.repairfaq.org/sam/laserfaq.htm#faqtoc
And try your question at sci.optics
George H.
0 new messages