Nec 17inch LCD Monitor

Dick

unread,

Mar 11, 2007, 8:52:29 PM3/11/07

to

Got a NEC 17inch monitor when powered up,stays on for about a second
and quits. The screen looks normal for that second.
I suppose it could be the inverter board,but I don't want to spend the $75.
if
it is something else. Anybody had this problem with this model ?
NEC 1700V LCD.
Thanks,
Dick

Sofie

unread,

Mar 12, 2007, 7:25:07 PM3/12/07

to

snipped:
"Dick" <ric...@phazer.com> wrote in message
news:hv1Jh.1031$2%3.969@trndny06...

> it is something else. Anybody had this problem with this model ?
> NEC 1700V LCD.
> Thanks,
> Dick
>

- - -- - - - - - - - --

Yea.... I had one, same model, it was a bad inverter board.

Matti

unread,

Mar 13, 2007, 9:44:49 AM3/13/07

to

Check smd-fuses on the inverter-board!

Matti

"Dick" <ric...@phazer.com> wrote in message
news:hv1Jh.1031$2%3.969@trndny06...

Dick

unread,

Mar 13, 2007, 7:12:04 PM3/13/07

to

I checked those two fuses on the inverter board, AOK. I don't think the
screen would even light at all if those fuses were bad. I guess I will throw
it to the recycle center.
Thanks,
Dick

"Dick" <ric...@phazer.com> wrote in message
news:hv1Jh.1031$2%3.969@trndny06...

JW

unread,

Mar 14, 2007, 7:40:22 AM3/14/07

to

On Tue, 13 Mar 2007 23:12:04 GMT "Dick" <ric...@phazer.com> wrote in
Message id: <8dGJh.4714$0W5.3911@trndny05>:

>I checked those two fuses on the inverter board, AOK. I don't think the
>screen would even light at all if those fuses were bad.

Yes, it will if only one of them is bad. I've fixed several of these with
that fault. If the fuses are OK, and it has a valid video signal yet still
blanks out, then the inverter is bad.

>I guess I will throw
>it to the recycle center.

A pity. Did you price an inverter first?

Homer J Simpson

unread,

Mar 14, 2007, 12:25:27 PM3/14/07

to

"Dick" <ric...@phazer.com> wrote in message

news:8dGJh.4714$0W5.3911@trndny05...

> I checked those two fuses on the inverter board, AOK. I don't think the
> screen would even light at all if those fuses were bad. I guess I will
> throw it to the recycle center.

http://freecycle.org/

or

http://www.craigslist.org/

--

Franc Zabkar

unread,

Mar 14, 2007, 4:19:01 PM3/14/07

to

On Tue, 13 Mar 2007 23:12:04 GMT, "Dick" <ric...@phazer.com> put
finger to keyboard and composed:

>I checked those two fuses on the inverter board, AOK. I don't think the
>screen would even light at all if those fuses were bad. I guess I will throw
>it to the recycle center.
>Thanks,
>Dick

First change the electrolytic capacitors. It could be a cheap fix.

>"Dick" <ric...@phazer.com> wrote in message
>news:hv1Jh.1031$2%3.969@trndny06...
>> Got a NEC 17inch monitor when powered up,stays on for about a second
>> and quits. The screen looks normal for that second.
>> I suppose it could be the inverter board,but I don't want to spend the
>> $75. if
>> it is something else. Anybody had this problem with this model ?
>> NEC 1700V LCD.
>> Thanks,
>> Dick

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

JW

unread,

Mar 15, 2007, 6:04:24 AM3/15/07

to

On Wed, 14 Mar 2007 06:40:22 -0500 JW <no...@dev.nul> wrote in Message id:
<5lnfv25p479q90e61...@4ax.com>:

>On Tue, 13 Mar 2007 23:12:04 GMT "Dick" <ric...@phazer.com> wrote in
>Message id: <8dGJh.4714$0W5.3911@trndny05>:
>
>>I checked those two fuses on the inverter board, AOK. I don't think the
>>screen would even light at all if those fuses were bad.
>
>Yes, it will if only one of them is bad. I've fixed several of these with
>that fault. If the fuses are OK, and it has a valid video signal yet still
>blanks out, then the inverter is bad.

Um, forgot to mention that it could be one or more of the tubes as well.