I downloaded the web receiver software and the update as instructed on the website. When I ran it for the first time it didn’t come up with config file info as the website said it would. When I run it it doesn’t seem to work properly. I got a password from KA1CDE. When I hit the login button it stays red for a few seconds then stops. Doesn’t say I’m connected, doesn’t give me the logoff option and I hear nothing. I’ve talked to him on the phone and his system shows me connected but I can do nothing using the web receiver.
On Jan 4, 12:22 am, K3AXR <dellpal...@gmail.com> wrote:
> Any thoughts as to what might be going on?
This happens to users on our remote sometimes It seems to be a bounce. double click. when you click login: if it turns red and than brown right away just click it again and but only once. This may solve your problem
I tried this and still nothing. None of the controls seem to work. When I press the Start Audio or Restart Radio buttons they do not respond. The only button that responds is the dial to change frequency. I downloaded the full receiver software then the update as instructed. Is there something else I need to download? As I said, the receiver I was trying to use shows me at his location as logged in but on a different freq. than mine shows. It just doesn't seem to be working at all.
On Jan 3, 8:38 pm, ROBve6ccl <ve6...@shaw.ca> wrote:
> On Jan 4, 12:22 am, K3AXR <dellpal...@gmail.com> wrote:
> > Any thoughts as to what might be going on?
> This happens to users on our remote sometimes > It seems to be a bounce. double click. when you click login: if > it turns red and than brown right away > just click it again and but only once. This may solve your problem
> I tried this and still nothing. None of the controls seem to work. > When I press the Start Audio or Restart Radio buttons they do not > respond. The only button that responds is the dial to change > frequency. I downloaded the full receiver software then the update as > instructed. Is there something else I need to download? As I said, the > receiver I was trying to use shows me at his location as logged in but > on a different freq. than mine shows. It just doesn't seem to be > working at all.
> On Jan 3, 8:38 pm, ROBve6ccl <ve6...@shaw.ca> wrote:
> > On Jan 4, 12:22 am, K3AXR <dellpal...@gmail.com> wrote:
> > > Any thoughts as to what might be going on?
> > This happens to users on our remote sometimes > > It seems to be a bounce. double click. when you click login: if > > it turns red and than brown right away > > just click it again and but only once. This may solve your problem
Are you sure the IP/URL is correct? As noted the only problem we have had with Connect is button issues where it Connects then Disconnects.
Please clarify the "config file info as the website said it would". This does not seem right? I assume the bottom bar says KA1CCDE is "Avaialble" when you start the connect process.
----- Original Message ----- From: "K3AXR" <dellpal...@gmail.com> To: "Amateur Radio Station Remoting" <remotebase@googlegroups.com> Sent: Sunday, January 03, 2010 7:22 PM Subject: [IRB] Issue with the Web Receciver
I downloaded the web receiver software and the update as instructed on the website. When I ran it for the first time it didn t come up with config file info as the website said it would. When I run it it doesn t seem to work properly. I got a password from KA1CDE. When I hit the login button it stays red for a few seconds then stops. Doesn t say I m connected, doesn t give me the logoff option and I hear nothing. I ve talked to him on the phone and his system shows me connected but I can do nothing using the web receiver.
Any thoughts as to what might be going on?
--
You received this message because you are subscribed to the Google Groups "Amateur Radio Station Remoting" group. To post to this group, send email to remotebase@googlegroups.com. To unsubscribe from this group, send email to remotebase+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/remotebase?hl=en.
Stan, Thanks for the response. I know I have the proper IP/URL because KA1CDE sees me and at his end I'm shown as logged int. The panel at the bottom left is green but says "checking status". None of the buttons seem to work. I press the login button and apparently it logs me into his system but I get no recognition of that on my end. I tried to find the reference to the "config" file again but couldn't find it. Dell K3AXR
On Mon, Jan 4, 2010 at 6:43 AM, W4MQ - Stan <w...@verizon.net> wrote:
> Are you sure the IP/URL is correct? As noted the only problem we have had > with Connect is button issues where it Connects then Disconnects.
> Please clarify the "config file info as the website said it would". This > does not seem right? I assume the bottom bar says KA1CCDE is "Avaialble" > when you start the connect process.
> Stan W4MQ
> ----- Original Message ----- > From: "K3AXR" <dellpal...@gmail.com> > To: "Amateur Radio Station Remoting" <remotebase@googlegroups.com> > Sent: Sunday, January 03, 2010 7:22 PM > Subject: [IRB] Issue with the Web Receciver
> I downloaded the web receiver software and the update as instructed on > the website. When I ran it for the first time it didn’t come up with > config file info as the website said it would. When I run it it > doesn’t seem to work properly. I got a password from KA1CDE. When I > hit the login button it stays red for a few seconds then stops. > Doesn’t say I’m connected, doesn’t give me the logoff option and I > hear nothing. I’ve talked to him on the phone and his system shows me > connected but I can do nothing using the web receiver.
> Any thoughts as to what might be going on?
> --
> You received this message because you are subscribed to the Google Groups > "Amateur Radio Station Remoting" group. > To post to this group, send email to remotebase@googlegroups.com. > To unsubscribe from this group, send email to > remotebase+unsubscribe@googlegroups.com<remotebase%2Bunsubscribe@googlegrou ps.com> > . > For more options, visit this group at > http://groups.google.com/group/remotebase?hl=en.
> --
> You received this message because you are subscribed to the Google Groups > "Amateur Radio Station Remoting" group. > To post to this group, send email to remotebase@googlegroups.com. > To unsubscribe from this group, send email to > remotebase+unsubscribe@googlegroups.com<remotebase%2Bunsubscribe@googlegrou ps.com> > . > For more options, visit this group at > http://groups.google.com/group/remotebase?hl=en.
There is no config file that you can edit for the Webxcvr.
Do you see the yellow "Avail" indicator for KA1CDE before you log in. The login is very simple, but depends upon two way messaging both 'to' the Host (which apparently works since it logs you in) and 'from' the Host. This latter may not be working and that would be due to a problem at the Host and not the client. If you see the yellos 'Avail" then this is very strange, but if you did not, then the Host is NOT actually sending anything back to you. Even if you are NOT logged in, there is a two-way dialogue between a client and Host, when the Host is selected in the drop down menu.
----- Original Message ----- From: Dell Palmer To: remotebase@googlegroups.com Sent: Monday, January 04, 2010 7:47 AM Subject: Re: [IRB] Issue with the Web Receciver
Stan, Thanks for the response. I know I have the proper IP/URL because KA1CDE sees me and at his end I'm shown as logged int. The panel at the bottom left is green but says "checking status". None of the buttons seem to work. I press the login button and apparently it logs me into his system but I get no recognition of that on my end. I tried to find the reference to the "config" file again but couldn't find it. Dell K3AXR
On Mon, Jan 4, 2010 at 6:43 AM, W4MQ - Stan <w...@verizon.net> wrote:
Are you sure the IP/URL is correct? As noted the only problem we have had with Connect is button issues where it Connects then Disconnects.
Please clarify the "config file info as the website said it would". This does not seem right? I assume the bottom bar says KA1CCDE is "Avaialble" when you start the connect process.
Stan W4MQ
----- Original Message ----- From: "K3AXR" <dellpal...@gmail.com> To: "Amateur Radio Station Remoting" <remotebase@googlegroups.com> Sent: Sunday, January 03, 2010 7:22 PM Subject: [IRB] Issue with the Web Receciver
I downloaded the web receiver software and the update as instructed on the website. When I ran it for the first time it didn’t come up with config file info as the website said it would. When I run it it doesn’t seem to work properly. I got a password from KA1CDE. When I hit the login button it stays red for a few seconds then stops. Doesn’t say I’m connected, doesn’t give me the logoff option and I hear nothing. I’ve talked to him on the phone and his system shows me connected but I can do nothing using the web receiver.
Any thoughts as to what might be going on?
--
You received this message because you are subscribed to the Google Groups "Amateur Radio Station Remoting" group. To post to this group, send email to remotebase@googlegroups.com. To unsubscribe from this group, send email to remotebase+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/remotebase?hl=en.
--
You received this message because you are subscribed to the Google Groups "Amateur Radio Station Remoting" group. To post to this group, send email to remotebase@googlegroups.com. To unsubscribe from this group, send email to remotebase+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/remotebase?hl=en.
--
You received this message because you are subscribed to the Google Groups "Amateur Radio Station Remoting" group. To post to this group, send email to remotebase@googlegroups.com. To unsubscribe from this group, send email to remotebase+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/remotebase?hl=en.
Thanks Stan, Maybe I should try another remote radio. Can you give me a userid and password for yours so I can try that. I really eventually need a station further away from me since I am in ocean city and too close to you. My primary interest us in having a second location to monitor check ins to a net I use on 40 (Northcars) but if I can get into yours then that'll show that the problems I'm having with KA1CDE are on his end. 73 Dell. K3AXR
Sent from Dell's iPhone
On Jan 4, 2010, at 9:21 AM, "W4MQ - Stan" <w...@verizon.net> wrote:
> There is no config file that you can edit for the Webxcvr.
> Do you see the yellow "Avail" indicator for KA1CDE before you log > in. The login is very simple, but depends upon two way messaging > both 'to' the Host (which apparently works since it logs you in) and > 'from' the Host. This latter may not be working and that would be > due to a problem at the Host and not the client. If you see the > yellos 'Avail" then this is very strange, but if you did not, then > the Host is NOT actually sending anything back to you. Even if you > are NOT logged in, there is a two-way dialogue between a client and > Host, when the Host is selected in the drop down menu.
> Stan > ----- Original Message ----- > From: Dell Palmer > To: remotebase@googlegroups.com > Sent: Monday, January 04, 2010 7:47 AM > Subject: Re: [IRB] Issue with the Web Receciver
> Stan, > Thanks for the response. I know I have the proper IP/URL because > KA1CDE sees me and at his end I'm shown as logged int. The panel at > the bottom left is green but says "checking status". None of the > buttons seem to work. I press the login button and apparently it > logs me into his system but I get no recognition of that on my end. > I tried to find the reference to the "config" file again but > couldn't find it. > Dell K3AXR
> On Mon, Jan 4, 2010 at 6:43 AM, W4MQ - Stan <w...@verizon.net> wrote: > Are you sure the IP/URL is correct? As noted the only problem we > have had > with Connect is button issues where it Connects then Disconnects.
> Please clarify the "config file info as the website said it would". > This > does not seem right? I assume the bottom bar says KA1CCDE is > "Avaialble" > when you start the connect process.
> Stan W4MQ
> ----- Original Message ----- > From: "K3AXR" <dellpal...@gmail.com> > To: "Amateur Radio Station Remoting" <remotebase@googlegroups.com> > Sent: Sunday, January 03, 2010 7:22 PM > Subject: [IRB] Issue with the Web Receciver
> I downloaded the web receiver software and the update as instructed on > the website. When I ran it for the first time it didn’t come up with > config file info as the website said it would. When I run it it > doesn’t seem to work properly. I got a password from KA1CDE. When I > hit the login button it stays red for a few seconds then stops. > Doesn’t say I’m connected, doesn’t give me the logoff option and I > hear nothing. I’ve talked to him on the phone and his system shows me > connected but I can do nothing using the web receiver.
> Any thoughts as to what might be going on?
> --
> You received this message because you are subscribed to the Google > Groups > "Amateur Radio Station Remoting" group. > To post to this group, send email to remotebase@googlegroups.com. > To unsubscribe from this group, send email to > remotebase+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/remotebase?hl=en.
> --
> You received this message because you are subscribed to the Google > Groups "Amateur Radio Station Remoting" group. > To post to this group, send email to remotebase@googlegroups.com. > To unsubscribe from this group, send email to remotebase+unsubscribe@googlegroups.com > . > For more options, visit this group at http://groups.google.com/group/remotebase?hl=en > .
> --
> You received this message because you are subscribed to the Google > Groups "Amateur Radio Station Remoting" group. > To post to this group, send email to remotebase@googlegroups.com. > To unsubscribe from this group, send email to remotebase+unsubscribe@googlegroups.com > . > For more options, visit this group at http://groups.google.com/group/remotebase?hl=en > . > --
> You received this message because you are subscribed to the Google > Groups "Amateur Radio Station Remoting" group. > To post to this group, send email to remotebase@googlegroups.com. > To unsubscribe from this group, send email to remotebase+unsubscribe@googlegroups.com > . > For more options, visit this group at http://groups.google.com/group/remotebase?hl=en > .
