Description:
Hobbyists interested in woodworking.
|
|
|
SOT: Spring for refinished chair
|
| |
I have an antique office chair, all refinished. But I can't find a replacement spring for the rocker mechanism. It is very simple, just an extension spring about 5 inches long and 1 1/4 inch in diameter. At least that is the one I have in there now. But it isn't nearly heavy enough. When you start to tip back it goes all the way with just a little force.... more »
|
|
Why Muslims Say Allah
|
| |
محاضرة Why Muslims Say Allah? لماذا يقول المسلمون الله باللغة الإنجليزية؟ للشيخ يوسف إيستس الأمريكي الذي كان في يوم من الأيام أحد خدام الكنيسة ثم أسلم بفضل الله الشيخ من أهل السنة والجماعة سلفي المعتقد... more »
|
|
OT: That was pretty bad.
|
| |
Watched the AMA's tonight. With few exceptions, it was bad. Awful in fact. Where was (were) Kings Of Leon? Adam Lambert's song was pretty good, bound to be a hit, but the presentation was disgusting. Maybe I'm getting old.
|
|
Early annual carving project
|
| |
Because the kids & grandkids schedules, we had our annual carving project early. This Turky was road-killed and then apparently swallowed a ham and stuffing. All the clan contributed and it was great. I'm heading for the recliner... [link]
|
|
Shop Video Tour
|
| |
I have been wanting to make a video tour for a while and finally did today. My little place of serenity. Check it out: [link] Brian --- [link]
|
|
Zinsser Sanding Sealer vs. Shellac
|
| |
Does anyone know the relative pound-cut of the standard shellac? I've found that the sealer is a 2lb. cut on their website. When spraying the standard shellac I've had to thin it some, so I was thinking of just buying the sealer and using that. But then I thought again and figured I could just buy a gallon of the regular shellac and a gallon... more »
|
|
Update on Unisaw setup..
|
| |
Thanks to all that gave tips for my friend and his "new to him" Unisaw.. I saw him tonight and he said that he read my email, went out to his shop and had it setup in about 20 minutes.. mac Please remove splinters before emailing
|
|
Video of My Table Saw Out-feed Table
|
| |
Thanks for all the pictures and ideas. I made a folding version and it turned out great. Instead of taking pictures and having to write descriptions and all that, I just took some video and put it on youtube. This is what I did... [link]
|
|
Flutes continued
|
| |
Ok, I tried making a few stopped flutes which terminate with a taper using a wedge as discussed in a previous thread. (Suggested by SonomaProducts) Here is the result: [link] Came out ok. You can definitely see where the taper begins in the flute (not a completely smooth transition). This can probably be... more »
|
|
|