Air compressor lines
Nonny
solution that worked for me. I had a cheap 5hp compressor with 60
gallon tank located by my breaker box in an adjoining garage area.
Air was piped to the shop via a 3/8" flex line and then
distributed to 3-4 locations in the shop. As was posted by
others, that's not enough air to run a good linear or ROS, but
plenty for most other uses.
While nothing will bump up the volume from the compressor, it was
irritating to not be able to break lugs or big bolts loose using
my biggest air wrench in the garage. Rather than snake in a 1/2"
air line to handle the big wrench, I hit on a great solution I'll
share with you.
Simply get one of the 5-gallon "carry anywhere" air tanks sold at
most auto parts stores, Sears or other places. The tanks are
intended to be filled with compressed air and then taken to the
site of the flat tire, or where needed without lugging around a
compressor.
In my case, I removed and tossed the 1/4" line that came with the
tank, drilled and fitted in a 1/2" air hose connection and put on
a 4' long 1/2" air line. The tank filler was replaced with a 3/8"
quick connect fitting to match the nearby 3/8" line in the garage.
The tank acted like a capacitor, storing compressed air and being
able to release it in a burst equal to what you'd have with a 1/2"
line. It wouldn't last long, but would be plenty to run the big
hammer wrench at full power to loosen the stuck big stuff. Most
of the time it wasn't needed and I could just use the little stuff
to do normal air wrenching. However, when I needed a big boost,
I'd just get out the tank, hook it inline where I was working and
get out the big wrench.
--
Nonny
You cannot make a stupid kid smart by
handing him a diploma. Schools need standards
to measure the amount of education actually
absorbed by children. Don't sacrifice the smart
kids to make the dumb ones feel good about themselves.
Gerald Ross
Elegant solution!
--
Gerald Ross
Cochran, GA
Preserve Bacteria.. Its the only
culture some people have.
Al
"Nonny" <some...@cox.net> wrote in message
news:2vjKm.10580$_b5....@newsfe22.iad...
regulator to store regulated air. It made a difference when using a die
grinder.