FS: QRZ Forums - Ham Radio Gear For Sale for Saturday 10 November 2012 - rec.radio.swap

The old Google Groups will be going away soon, but your browser is incompatible with the new version.
rec.radio.swap
Message from discussion FS: QRZ Forums - Ham Radio Gear For Sale for Saturday 10 November 2012
Path: q13ni313034wii.0!nntp.google.com!feeder2.cambriumusenet.nl!feeder1.cambriumusenet.nl!feed.tweaknews.nl!85.12.40.130.MISMATCH!xlned.com!feeder1.xlned.com!newsfeed.xs4all.nl!newsfeed6.news.xs4all.nl!xs4all!newspeer1.nac.net!border4.nntp.dca.giganews.com!border2.nntp.dca.giganews.com!border3.nntp.dca.giganews.com!border1.nntp.dca.giganews.com!nntp.giganews.com!novia!news-hub.siol.net!news1.t-com.hr!newsfeed.CARNet.hr!news.glorb.com!news-out.readnews.com!transit4.readnews.com!panix!not-for-mail
From: rec-radio-info-requ...@panix.com (QRZ.com via rec.radio.info Admin)
Newsgroups: rec.radio.swap
Subject: FS: QRZ Forums - Ham Radio Gear For Sale for Saturday 10 November 2012
Followup-To: poster
Date: Sat, 10 Nov 2012 21:03:37 +0000
Organization: QRZ.com
Lines: 1189
Message-ID: <90e6ba6e889ce90b5904ce2a6690@google.com>
NNTP-Posting-Host: panix6.panix.com
Mime-Version: 1.0
NNTP-Posting-Date: Sat, 10 Nov 2012 21:03:41 +0000 (UTC)
Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=yes

QRZ Forums - Ham Radio Gear For Sale

///////////////////////////////////////////
Elecraft K2, KPA100, KAT100, KDSP2, KSB2, KNB2, MH2, ETS15 Kits

Posted: 10 Nov 2012 11:36 AM PST
http://forums.qrz.com/showthread.php?367894-Elecraft-K2-KPA100-KAT100-KDSP2-KSB2-KNB2-MH2-ETS15-Kits&goto=newpost


Hello,



I am selling the following Elecraft Kits for $1500.00:



K2 - HF Transceiver S/N 3271 (Rev B)

  KPA100 - 100W Internal Integration Kit

  KAT100-1 - 100W External ATU

  KDSP2 - Internal DSP FIlter / Clock

  KSB2 - SSB Option

  KNB2 - Noise Blanker

  MH2 - K2 Microphone by Heil

  ETS15 - 1.5" Tilt Stand for K2/KAT100 Combo



Bonuses include a custom felt cover, dummy load kit, and the K2 Rework  
Eliminator.

Price includes free shipping to lower 48. Payment by cashiers check or  
money order.

All these kits are 100% unassembled and ready to begin. No electronic parts  
bags have been opened. There is plenty of assistance for building these  
kits on the Elecraft Forums. I have just never found the time to build, so  
here is an opportunity to save some money and possible sales tax for CA  
residents.

Feel free to ask any questions and thanks for looking.



73, Russ W9EL

rbout...@hotmail.com


	

	

	

	
		
			Attached Images
			
			

	
	ElecraftK2.jpg
(577.2 KB)


			
			
	

	

	



///////////////////////////////////////////
VIBROPLEX Keyer Chrome

Posted: 10 Nov 2012 10:41 AM PST
http://forums.qrz.com/showthread.php?367890-VIBROPLEX-Keyer-Chrome&goto=newpost


Its in good condition and will take 90.00 shipped within the 48 states.  If  
using Paypal please add 3%, thanks Michael.


	

	

	

	
		
			Attached Images
			
			

	
	PB231311.JPG
(500.7 KB)



	
	PB231312.JPG
(542.8 KB)



	
	PB231313.JPG
(500.9 KB)


			
			
	

	

	



///////////////////////////////////////////
Bird Termaline 500W Dummy Load

Posted: 10 Nov 2012 10:41 AM PST
http://forums.qrz.com/showthread.php?367889-Bird-Termaline-500W-Dummy-Load&goto=newpost


I have a used, Bird Termaline 500W Dummy Load for sale. Serial #3774, Model  
# 8201 rated to 500W at 50 ohms, covers a frequency range up to 2.4 GHz  
with installed "N" connector. I've been told the connector is changeable,  
but have not researched it myself. I just used it with the installed  
connector.



Unit is in VG condition and includes a built-in carry handle on top. The  
manual can be downloaded here. Approximate shipping weight is 25#. NOTE:  
This unit is designed to be used in the horizontal position with feet down  
ONLY! This is spelled out in the manual, but I wanted to reinforce this as  
many people (men in particular) do not read manuals. Holes predrilled in  
feet for permanent mounting or addition of rubber feet (not included).



Asking $300 OBO, plus CONUS shipping from 44060. Local pickup OK with  
advance notice and verifiable amateur call sign. NO INTERNATIONAL SHIPPING.  
Scammers, don't even try your baloney...I've seen and heard it all. PayPal  
preferred (I'll split the fee), but will accept USPS Money Order. Shipping  
upon receipt of fees. No returns. Not really interested in a swap at this  
time, as the shack is already got more stuff than I can use (if that's  
really possible).



I can be reached via email: jvalencic at gmail dot com  NOTE: This is NOT  
my PayPal account, so you need to contact me to get that information.


	

	

	

	
		
			Attached Images
			
			

	
	IMG_0970.jpg
(473.1 KB)



	
	IMG_0972.jpg
(369.3 KB)



	
	IMG_0973.jpg
(462.3 KB)


			
			
	

	

	



///////////////////////////////////////////
Heathkit battery eliminator / Lester battery charger

Posted: 10 Nov 2012 09:44 AM PST
http://forums.qrz.com/showthread.php?367883-Heathkit-battery-eliminator-Lester-battery-charger&goto=newpost


Heathkit battery eliminator  For sale $50.00 plus shipping to lower 48, no  
pay pal, USPS money order OK.

Powered up, tested output, works fine, needs fuse holder replaced.



Lester electrical automatic battery charger, model 18730, it's small but  
very heavy. I have seen these selling for  outrages prices on the internet  
but because of the weight I will sell it for $50.00 plus shipping, I think  
it might fit in the $15.00 dollar postal priority box. A few scuffs but it  
works.



P1013323-2.jpgP1013327-1.jpg



If interested please email at w6radc...@gmail.com



Thanks

Jim


	

	

	

	
		
			Attached Images
			
			

	
	P1013323-2.jpg
(156.1 KB)



	
	P1013327-1.jpg
(163.9 KB)


			
			
	

	

	



///////////////////////////////////////////
Handie Talkies / VHF mobiles

Posted: 10 Nov 2012 09:34 AM PST
http://forums.qrz.com/showthread.php?367881-Handie-Talkies-VHF-mobiles&goto=newpost


I have several handie talkies for sale, These radios are from fire and  
police departments that have upgraded their radios.

Some of these I can not test, one is missing a battery, two are missing  
antennas. The one I did test works good, I would assume the rest do too but  
I canÂ’t sell them as working, so they are as is, plus two VHF mobile radios.



1 Motorola HT-90 UHF CH.1/ 467.075 CH.2/462.075

1 Belcom HC-144/uP VHF programmable front pad S/N 3100014, Back battery  
cover and battery not the greatest.

1 Motorola radius P-100 two CH. UHF no battery. Model # H44QHU7120AN

    T1-467.175 R1-462.175 / T2-462.175 R2-462.175

2 Maxon 0510 VHF radios four CH. One works great the other needs PTT fixed.

1 Midland 16 CH UHF 2/5watts P/N 70-245bmx, needs antenna.



Standard C866L 40 watt vhf mobile, no mic, superslide mount.   $25.00 plus  
shipping.

Standard GX3000v 40 watt VHF mobile, with mic $25.00 plus shipping.





I am asking $ 50.00 for all six HT radios, and $25.00 each for the VHF  
mobiles  plus shipping to lower 48, No Pay Pal, USPS money order OK.





Thanks

Jim

W6radc...@gmail.com

P1013293-5.jpgP1013294-4.jpgP1013332-1.jpgP1013335-3.jpg


	

	

	

	
		
			Attached Images
			
			

	
	P1013293-5.jpg
(192.7 KB)



	
	P1013294-4.jpg
(235.2 KB)



	
	P1013332-1.jpg
(161.1 KB)



	
	P1013335-3.jpg
(134.2 KB)


			
			
	

	

	



///////////////////////////////////////////
Motorola VHF portable radio

Posted: 10 Nov 2012 09:29 AM PST
http://forums.qrz.com/showthread.php?367880-Motorola-VHF-portable-radio&goto=newpost


Hello folks,



Motorola CP200 VHF HT.  16 channel with scan, DPL, CTCSS.



This radio covers 146-173mhz.  Radio is in good shape.  It has been carried  
on a belt for a few years, but no cracks/dents/broken plastic.



Radio functions perfectly and the battery holds a great charge.



Included but not pictured is a desktop drop in charger.



$170 shipped.



PM me if interested.



73,

Brad


	

	

	

	
		
			Attached Images
			
			

	
	CP200.jpg
(80.3 KB)


			
			
	

	

	



///////////////////////////////////////////
Kenwood hand mic

Posted: 10 Nov 2012 09:12 AM PST
http://forums.qrz.com/showthread.php?367878-Kenwood-hand-mic&goto=newpost


I am offering for sale a very nice Kenwood hand mic model MC-35S. It is  
high Z (50k) noise cancelling hand mic. It also has a 4 pin plug for  
Kenwood models 520/820/530/830 and my be others.

I was using on my TS830s which has been sold. I am a non-smoker and it came  
from a non-smoking shack, from whom was the original owner. My price is $50  
shipped via USPS USA only.

Thanks for reading. You will not be disappointed.

Don, W5KG


	

	

	

	
		
			Attached Images
			
			

	
	001.JPG
(382.0 KB)


			
			
	

	

	



///////////////////////////////////////////
Arrow II Satellite Antenna

Posted: 10 Nov 2012 08:57 AM PST
http://forums.qrz.com/showthread.php?367875-Arrow-II-Satellite-Antenna&goto=newpost


I have an Arrow II Satellite antenna model 146/437-10 for sale,  It is  
around 18 months old.  I have only used it a couple of times and then lost  
interest in working sats.  It is in great shape and has pretty much just  
been sitting in the corner of the shack its whole life.  It has the split  
boom and built in duplexer.



I'm asking $100.00,  paypal only please,  free shipping in CONUS (Sorry I  
will not ship outside U.S.)







DSCF8197.JPGDSCF8199.JPG


	

	

	

	
		
			Attached Images
			
			

	
	DSCF8197.JPG
(1.71 MB)



	
	DSCF8199.JPG
(1.95 MB)


			
			
	

	

	



///////////////////////////////////////////
Heathkit battery eliminator / Lester battery charger

Posted: 10 Nov 2012 08:40 AM PST
http://forums.qrz.com/showthread.php?367874-Heathkit-battery-eliminator-Lester-battery-charger&goto=newpost


Heathkit battery eliminator  For sale $50.00 plus shipping to lower 48, no  
pay pal, USPS money order OK.

Powered up, tested output, works fine, needs fuse holder replaced.



Lester electrical automatic battery charger, model 18730, it's small but   
very heavy. I have seen these selling for  outrages prices on the  internet  
but because of the weight I will sell it for $50.00 plus  shipping, lower  
48 no pay pal, USPS money order OK. A few scuffs but it  works.









If interested please email at w6radc...@gmail.com



Thanks

Jim




///////////////////////////////////////////
HEATHKIT SB 220

Posted: 10 Nov 2012 08:32 AM PST
http://forums.qrz.com/showthread.php?367872-HEATHKIT-SB-220&goto=newpost


Very good condition. Full output.   $600  You Ship   Tom   
DSCN0264.JPGtomo...@yahoo.com


	

	

	

	
		
			Attached Images
			
			

	
	DSCN0264.JPG
(251.4 KB)


			
			
	

	

	



///////////////////////////////////////////
Yaesu FT-625RD Six Meter Multimode Transceiver

Posted: 10 Nov 2012 08:04 AM PST
http://forums.qrz.com/showthread.php?367868-Yaesu-FT-625RD-Six-Meter-Multimode-Transceiver&goto=newpost


Yaesu FT-625RD Six Meter Multimode Transceiver



The Yaesu FT-625RD is a 6 meter multi-mode transceiver that operates in  
SSB, CW, FM and AM modes. Power output is: 25 watts SSB/CW/FM and 8 watts   
AM. Frequency coverage is 50 to 54 MHz. It has a noise blanker, speaker and  
three way analog meter (S Meter/Power Out/FM Discriminator). It also has a  
built in AC power supply and can be powered from 12 volts DC, but will need  
a power cord for DC operation.



An Advanced Receiver Research P50VD receiver preamplifier has been  
installed in the transceiver. This preamp has a noise figure of less than  
1.3 dB and even with a simple antenna, band noise and not receiver noise is  
the limiting factor. If the antenna picks up a signal you will hear it.  
Nothing is too weak to overcome the receiver noise in this radio!



The radio works well and I have had it on the air recently. It has an  
analogue VFO and some drift is evident as is normal with this type of VFO  
and it does seem close to specifications. The s-meter indication of the  
noise floor will slowly drop by about 3 S-units over a few hours after  
power on. I am not sure if this is from heat related changes in the AGC,  
s-meter circuitry or receiver gain, but it does not effect performance in  
any way. Just a little quirk. Some of the potentiometers could also use  
some cleaning, although just using them will probably clean them up well.  
The radio has been sitting for a number of years.



FM mode has a split function, but has a 1 MHz offset which is not used all  
areas area. Crystals would be required to enable operation at 1.7 MHz  or  
another split. Unless one wants to spend the money on the custom crystals,  
FM use would be limited to simplex operation or the 1 MHz split. The  
optional memory unit would also allow split operation with any offset, but  
is not included in this transceiver. The optional memory unit is very rare,  
expensive, and difficult to find. This radio is best as a weak signal  
(SSB/CW) radio anyways.



An optional 600 Hz narrow crystal filter for CW is also available and I  
will install it if requested.



This transceiver does NOT have the optional memory unit.



The original user manual for the radio and preamplifier is included as well  
as the AC power cable and the accessory plug. Also included is a Realistic  
handheld microphone model 21-1549A which seems to work well.



The radio belonged to a good friend on mine who is now a silent key. I  
purchased the radio for him off of e-Bay in 2006 and checked it over at  
that time. The only problem I found was a burnt-out dial light and I  
replaced that with a blue LED. He used the radio a bit for a couple of  
years, but the radio sat idle for the last few years. I am selling it for  
his heirs.



Also available is a S.E.M Isle of Man V.H.F. TranZmatch. This is a six  
meter only antenna tuner. Note that this antenna tuner does not cover 2  
meters or HF.



FT-625RD including manual, mic, and AC power cord: $375.



600 Hz narrow CW crystal filter: $40. I will install it if requested with  
no installation charge.



S.E.M Isle of Man V.H.F. TranZmatch: $40.



I am open to offers.



Note that the crystal filter and tranzmatch will not be sold separately  
before the radio is sold. The purchaser of the radio will get the first  
option on these accessories.



The rig is located in Langley, British Columbia, Canada. I would prefer  
local pickup, but will ship. Please note that shipping in or from Canada is  
much more expensive than the US. It could easily hit $75. Also a US buyer  
may incur import duties or taxes and this is the purchaser's  
responsibility. Shipping will be limited to the 10 Canadian Provinces and  
lower 48 US States only. The prices asked above do NOT include shipping  
charges.



  All items are sold "As Is". No guarantees.



Contact Darrell VA7TO: va...@shaw.ca

More items for sale at http://va7to.ca


	

	

	

	
		
			Attached Images
			
			

	
	6mTranzmatch.jpg
(120.5 KB)



	
	6mTranzmatchInside.jpg
(122.1 KB)



	
	FT625RD.jpg
(119.2 KB)



	
	FT625RDFilter.jpg
(120.8 KB)



	
	FT625RDFront.jpg
(121.9 KB)



	
	FT625RDFront2.jpg
(120.5 KB)



	
	FT625RDInside.jpg
(116.4 KB)


			
			
	

	

	



///////////////////////////////////////////
Elecraft K2, KPA100, KAT100, KDSP2, KSB2, KNB2, MH2, ETS15

Posted: 10 Nov 2012 07:09 AM PST
http://forums.qrz.com/showthread.php?367861-Elecraft-K2-KPA100-KAT100-KDSP2-KSB2-KNB2-MH2-ETS15&goto=newpost


Hello,



I am selling the following Elecraft Kits for $1500.00:



K2 - HF Transceiver S/N 3271  (Rev B)

KPA100 - 100W Internal Integration Kit

KAT100-1 - 100W External ATU

KDSP2 - Internal DSP FIlter / Clock

KSB2 - SSB Option

KNB2 - Noise Blanker

MH2 - K2 Microphone by Heil

ETS15 - 1.5" Tilt Stand for K2/KAT100 Combo



Bonuses include a custom felt cover, dummy load kit, and the K2 Rework  
Eliminator.

Price includes free shipping to lower 48. Payment by cashiers check or  
money order.

All these kits are 100% unassembled and ready to begin. There is plenty of  
assistance for building these kits on the Elecraft Forums. I have just  
never found the time, so here is an opportunity to save some money and  
possible sales tax for CA residents. Feel free to ask any questions and  
thanks for looking.



73, Russ  W9EL


	

	

	

	
		
			Attached Images
			
			

	
	image.jpg
(87.5 KB)


			
			
	

	

	



///////////////////////////////////////////
MFJ-941D Versa Tuner II

Posted: 10 Nov 2012 06:37 AM PST
http://forums.qrz.com/showthread.php?367859-MFJ-941D-Versa-Tuner-II&goto=newpost


This tuner was pulled from an active setup and replaced with an automatic  
antenna tuner so I no longer have need of this.  Electronically this tuner  
functions as it should.  Cosmetically it has some scratches, it's not been  
abused these are normal wear and tear.  I'm asking $65 or best (reasonable)  
offer plus shipping (about $11) to anywhere in the lower 48.  I accept  
PayPal only, you can contact me at w1gnl.john [at] gmail [dot] com thanks  
for looking!



IMG_20121110_071909_resize.jpg IMG_20121110_071942_resize.jpg  
IMG_20121110_071956_resize.jpg

IMG_20121110_072022_resize.jpg  
IMG_20121110_072030_resize.jpgIMG_20121110_072152_resize.jpg

IMG_20121110_072141_resize.jpg


	

	

	

	
		
			Attached Images
			
			

	
	IMG_20121110_071909_resize.jpg
(429.1 KB)



	
	IMG_20121110_071942_resize.jpg
(507.7 KB)



	
	IMG_20121110_071956_resize.jpg
(397.6 KB)



	
	IMG_20121110_072022_resize.jpg
(553.7 KB)



	
	IMG_20121110_072030_resize.jpg
(521.9 KB)



	
	IMG_20121110_072152_resize.jpg
(429.3 KB)



	
	IMG_20121110_072141_resize.jpg
(437.6 KB)


			
			
	

	

	



///////////////////////////////////////////
GE Desktop DC Power Supply with Wired Mic Scan/Monitor Control Clip

Posted: 10 Nov 2012 05:41 AM PST
http://forums.qrz.com/showthread.php?367855-GE-Desktop-DC-Power-Supply-with-Wired-Mic-Scan-Monitor-Control-Clip&goto=newpost


Up for sale is a General Electric DC Power Supply which I recently  
acquired. I have tested the power supply and it is working. The power  
supply includes a special wiring harness for use with one or more  
particular G.E. radios, and there is a metal mic clip wired to the harness  
which is obviously intended for use with radios that start and stop  
scanning and/or "monitor" features when the mic is placed back in the clip.  
All of that could easily be done away with if not needed, tucked behind a  
shelf, whatever. Bottom line is that this power supply puts out DC voltage  
as it should. It's quite heavy for its size, so it no doubt has a hefty  
transformer in it. I am not sure how many amps of DC current this thing can  
handle but it has to be quite a few -- I'm fairly certain it will handle  
even a mobile rig putting out quite a few watts, since G.E. obviously  
factory wired it for powering their radios. I can't find specs on it  
anywhere online. It's just sitting in my garage taking up space, so I'm  
selling it cheap. Will ship USPS Priority Mail anywhere in the U.S.,  
including AK or HI. Price is only $25 plus $15.45 shipping for a total of  
$40.45. Payment by Paypal only, please, with NO extra fees for using  
Paypal. I can be reached at KK4ICE(at)arrl.net, or by phone at  
three-three-four-444-6796. Please don't private message me here, as I often  
overlook the message notification at the top of the screen.



_DSC5219.jpg



_DSC5221.jpg



_DSC5222.jpg


	

	

	

	
		
			Attached Images
			
			

	
	_DSC5219.jpg
(167.6 KB)



	
	_DSC5221.jpg
(163.9 KB)



	
	_DSC5222.jpg
(176.1 KB)


			
			
	

	

	



///////////////////////////////////////////
Type 810 Transmitter Tubes

Posted: 10 Nov 2012 04:56 AM PST
http://forums.qrz.com/showthread.php?367851-Type-810-Transmitter-Tubes&goto=newpost


Three Type 810 Transmitter Tubes LIMITED TIME Minimum Risk Purchase Offer!!



NOTE:  THESE TUBES ARE OFFERED FOR SALE FOR A LIMITED TIMEÂ…SEE TEXT #.



100_1878.JPG100_1877.JPG



I have three (3) Type 810 transmitter tubes for sale.  These type 810  
triode transmitter tubes were in a large lot of tubes that were purportedly  
pulled from the assembly line of a major manufacturer for the purpose of  
quality control inspection or due to production overruns.  This  
manufacturer produced tubes for itself and several other major tube  
companies.  Sometimes, if a production run for a tube included quantities  
for more than one tube company, the brand names were left off the envelopes  
and/or bases of the tubes.  The company for which the tubes were  
manufactured would then use a process whereby their brand name was applied  
to the tubes.  The 810 tubes I am selling have no brand names.  When I  
received these tubes, they were not in boxes but were wrapped in protective  
batting.



I cannot verify that these tubes have never been used but they appear to be  
excellent physical condition.  I have no way to test these tubes  
operationally.  However, the filaments of all three register continuity on  
my digital ohm meter.  I have checked between all the base pins, grid and  
plate connections using multi-megohm settings on my ohm meter.  I find no  
shorts.  The graphite plates of all three appear to be in excellent  
condition.



I will furnish to the Buyer technical documentation on these 310 tubes as  
published by RCA in their Â“RCA Tube HandbookÂ” for engineers.  Also diagrams  
of how to use them to build a Multi-band 275 watt single tube CW  
transmitter; a Push-Pull RF Amplifier for 750 Watt Class C CW or Class C  
Plate Modulated 500 Watt AM Phone and a diagram for a Class B Modulator.



Each of these tubes has a serial number written on the glass support inside  
the tube.  The serial numbers for the tubes are respectively:  E132; Y1481  
and 17Y61.



#  New Old Stock versions of this tube are advertised for up to $179 per  
tube in some retail outlets.  Since I cannot say the ones I am selling are  
NOS, I am selling them as used and offering all 3 tubes for $130 + $16  
Packing, Postage, Insurance and Tracking           Total $146.



# These tubes are offered at this price until midnight November 24.  First  
come, first served.

RETURNS:  I will accept returns on these tubes as follows:



Buyer must contact Seller within 14 days of receipt of the tubes if they  
wish to return them.  Buyer is requested to give the reason for the return  
at that time.  Buyer must pay return shipping charges including insurance  
and tracking.  Tubes must be carefully packed so as to prevent damage.   
Buyer must return tubes in same condition as when shipped by Seller.  The  
tubes will be verified by lot or serial number and tested upon return.  If  
there is evidence of mistreatment of the tube or the filaments are burned  
out, no refund will be forthcoming. So, treat these tubes with tender  
loving care during the 14 days.



If all these conditions are met, a full refund of Buyers purchase price and  
original shipping charges, including those incurred by the Seller, will be  
cheerfully refunded.



My contact information is: dmead...@retroradel.com (preferred) or telephone  
706-273-0030.


	

	

	

	
		
			Attached Images
			
			

	
	100_1877.JPG
(193.7 KB)



	
	100_1878.JPG
(778.9 KB)
Create a group - Google Groups - Google Home - Terms of Service - Privacy Policy
Account Options
