Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
FS: QRZ Forums - Ham Radio Gear For Sale for Thursday 23 May 2013
1 view
Skip to first unread message
QRZ.com via rec.radio.info Admin
May 23, 2013, 4:12:27 PM5/23/13
to
QRZ Forums - Ham Radio Gear For Sale
///////////////////////////////////////////
ICOM 746 PRO EXCELLENT
Posted: 23 May 2013 11:53 AM PDT
http://forums.qrz.com/showthread.php?392300-ICOM-746-PRO-EXCELLENT&goto=newpost
Looks and works like NEW! No smoke, pets, or junk stacked on it! Custom
cover when not in use which is most of the time since I have Flex SDR's.
Have box, mini-manual, mike. Sorry no trades, paypal, or foreign sales.
This is not a distress sale so please no low ball offers. If you are
looking for an excellent example of this fine radio hyou will not be
disappointed. $1050 plus shipping or pick up near Houston, TX. please
e-mail direct at harveywizbang at aol dot com or call me 8 to 8 central
time at nine three six, five two four, two four three one. 73, K3PD
Attached Images
CIMG3315.JPG
(1.02 MB)
CIMG3316.JPG
(1.12 MB)
CIMG3324.JPG
(1.10 MB)
CIMG3321.JPG
(1.19 MB)
///////////////////////////////////////////
MFJ-1274 TNC
Posted: 23 May 2013 11:27 AM PDT
http://forums.qrz.com/showthread.php?392298-MFJ-1274-TNC&goto=newpost
MFJ TNC-2 compatible, used but looks fine and :pworks well. $50 shipped to
US states only via Paypal only.
Email to KK4...@gmail.com for Paypal address.
Attached Images
GEDC0150.JPG
(50.4 KB)
///////////////////////////////////////////
Kenwood TK-370 UHF HT
Posted: 23 May 2013 10:46 AM PDT
http://forums.qrz.com/showthread.php?392297-Kenwood-TK-370-UHF-HT&goto=newpost
32 channel portable HT with good battery, drop in charger, going to new
good home for the right price. $50 shipped to US states only via Paypal
only. Programmed with GMRS channels but can do Amateur UHF as well.
Email to KK4...@gmail.com for Paypal address.
Attached Images
GEDC0160.JPG
(49.5 KB)
///////////////////////////////////////////
three position terminal blocks
Posted: 23 May 2013 09:53 AM PDT
http://forums.qrz.com/showthread.php?392294-three-position-terminal-blocks&goto=newpost
i have a few used three position terminal blocks that work very well to run
more than one radio off one power supply
see picture
it has three 1/4 stud bolts around 1 1/2 inches long
you can used top terminal for minus from power supply and minus to radio,
you can use middle terminal for earth ground, you can use bottom terminal
for plus from power supply and plus voltage to radio
these are heavy duty terminals
6.00 each shipped with one washer and one nut on each terminal
paypal
contact me at r_ta...@comcast.net
Attached Images
MVC-008S.JPG
(109.1 KB)
///////////////////////////////////////////
Cushcraft 6m Beam
Posted: 23 May 2013 09:29 AM PDT
http://forums.qrz.com/showthread.php?392293-Cushcraft-6m-Beam&goto=newpost
Cushcraft (pre-MFJ) 6 meter beam antenna, model A505S. This is a 5 element
beam with 10.5 db gain. I had it mounted on a pole a few years back during
a winter. Haven't used it since so its up for sale. No bent tubing but it
has 2 minor issues. First of all you will have to supply the U-bolts to
mount the antenna to your mast. Second, water had frozen inside of the boom
(about 1 foot from the end) and split the tubing. I have included a
picture of the damage. Since it is at the end of the boom, you wouldn't
have to replace the tubing, but if you did, it may be available from MFJ or
DX Engineering.
Your antenna will be shipped in its original box. Price is $100 and that
includes shipping to those in the 48 states. You may contact me at my call
at ARRL.NET
Thanks,
Greg W8NGA010.JPG011.JPG012.JPG014.JPG
Attached Images
010.JPG
(1.37 MB)
011.JPG
(1.46 MB)
012.JPG
(1.19 MB)
014.JPG
(1.15 MB)
///////////////////////////////////////////
40' American Tower Company series 10 tower
Posted: 23 May 2013 08:46 AM PDT
http://forums.qrz.com/showthread.php?392290-40-American-Tower-Company-series-10-tower&goto=newpost
I have two 10' sections, and one 10' top section, and a 10' mast. It has
the hardware for a hinged base, but the buried portion is not included (it
is under 8 yards of concrete) :(
Tower is in perfect shape.
I paid over $300 for these pieces alone...Id take $50.
Local pickup, or I can offer limited delivery for Central Ohio for mileage
rates.
For best response email to "chris(at sign)n8wct.com".
tower.jpg
Attached Images
tower.jpg
(61.2 KB)
///////////////////////////////////////////
Kenwood TM-255a Plus TM-455a All Mode Transceiver Combo Owner Manual
Schmatics etc
Posted: 23 May 2013 08:14 AM PDT
http://forums.qrz.com/showthread.php?392286-Kenwood-TM-255a-Plus-TM-455a-All-Mode-Transceiver-Combo-Owner-Manual-Schmatics-etc&goto=newpost
Ham Radio All-Mode Transeiver Pair: Rare Kenwood TM-255A and TM-455A
Radios. These are a matched pair, used for Sat and Moon Bounce work but
have features needed for normal repeater and simplex on AM FM CW and SSB.
These little guys do it all. Read the specs below for details. Sold only
together. Have had very little use, been setting in the ham shack without
being used because I never had the necessary antennas. Used a little on
sideband, much better way to talk. In perfect condition, includes original
mics, mobile mounting brackets, owners manuals with schmatics and some
added power cords designed for use in a mobile setup if preferred.
Pictures are of actual radios. Sell on ebay for upwards of $700 for the
pair but I'd rather not deal with ebay. Call if you have questions.
Thanks...Bob Weaver Asking price $450 plus shipping probably around $30.
That price is for both radios, about $225 for an all-mode Kenwood.
All-Mode Transceiver TM-255/455(A/E)
All-mode versatility enters a new era with our innovative TM-255A/E (2 m)
and TM-455A/E (70 cm), both featuring a detachable front panel for easy
mounting in a car. But whether mobile or stationary, these compact
transceivers offer matchless performance -- in FM, SSB and CW modes. Among
their many impressive features are 101 memory channels, DDS with "fuzzy
logic" control, twin tuning dials, and a data connector for 1200/9600 bps
packet communications.
Features at a glance:
2 m (TM-255A/E) or 70 cm (TM-455A/E) all-mode operation
101 memory channels
DDS with "fuzzy logic" control
TF-SET (TX frequency set) function
DTSS selective calling with pager function
1200/9600 bps packet terminal
TM-255/455(A/E) in detail:
40-watt output
Maximum RF output is 40 watts (TM-255A/E), and 35 watts (TM-455A/E). A
HI/LO switch enables power reduction to 5 watts.
100 multi-function memory channels plus 1 call channel
Facilitating on-the-move operation are 101 memory channels, plus memory
shift and memory scroll functions. Channels 50~98 are capable of storing
transmit and receive frequencies independently.
Multi-scan functions
There is a choice of full band and programme band scans, memory scan with
memory channel lock-out, MHz scan and V/M/C scan. The operator can also
select time-operated or carrier-operated scan stop modes, and adjust scan
speed.
Data connector for 1200/9600 bps packet
A 6-pin mini DIN connector lets the operator enjoy either standard 1200 bps
or 9600 bps high-speed packet communications with a TNC.
DDS (Direct Digital Synthesizer) with fuzzy control
We've incorporated "fuzzy logic" control circuitry, so the main encoder
tunes smoothly from fine (5 Hz step) to fast forward (200 Hz step).
Twin tuning dials
In addition to the smooth-action dial on the main unit, there is a
click-type dial on the detachable panel for convenient mobile use.
Dual-menu system
The user-friendly menus -- which are also accessible via the supplied
microphone -- are divided into two groups (A & B) depending on frequency of
use.
Interference reduction
AIP (Advanced Intercept Point) circuitry allows the operator to choose
either high sensitivity or a high intercept point to suit conditions.
IF-SHIFT (SSB, CW) and a pulse noise blanker further improve RX performance.
TF-SET
TF-SET is available when the receive frequency is locked, so the operator
can avoid losing a targeted station.
Multi-function microphone
The supplied remote-control microphone has 4 programmable function keys --
ideal for mobile operation.
Other Features:
Built-in DTSS selective calling with pager
Semi break-in circuit (CW)
Automatic mic gain control circuit (SSB)
Built-in TCXO (temperature-compensated crystal oscillator)
Tone alert system with elapsed time indicator
S-meter squelch
All-mode squelch
Built-in CTCSS encoder & optional decoder (TSU-8)
Auto power-off & time-out timer
Dimensions (W x H x D) 180 x 60 x 215.5 mm (7.0 x 2.4 x 8.5 in.
NOTE: The mic connectors I use allow you to disconnect the mic without
having to remove the faceplate. When used in data mode for sat or moon
work, the mics are not needed and are best removed so you don't accidently
key the radio. You can remove the faceplate, remove the mic cable and
replace it with the mic itself and you will be back to stock. No
modifications were made to the radios, just the added pigtail to the mic.
Attached Images
20130522_103753.jpg
(1.59 MB)
20130522_104125.jpg
(1.17 MB)
20130523_090610.jpg
(1.31 MB)
20130523_090621.jpg
(1.35 MB)
20130523_090635.jpg
(2.11 MB)
///////////////////////////////////////////
Ham Items
Posted: 23 May 2013 07:43 AM PDT
http://forums.qrz.com/showthread.php?392282-Ham-Items&goto=newpost
All these items are new. Have never been used. Paypal only. Will ship
priority within Conus US.
Contact me at Norcalham at gmail dot com. Thanks!
Cho
W6TOY
MFJ 1702C $30 plus $5 shipping
MFJ 564 $50 plus $10 shipping
YSK 857 Sep kit $30 plus $10 shipping
Samlex 1223 $70plus $10 shipping
M2 2m HO Loop $60 plus $10 shipping
Attached Images
image.jpg
(2.20 MB)
image.jpg
(1.91 MB)
image.jpg
(2.09 MB)
image.jpg
(2.25 MB)
image.jpg
(1.83 MB)
///////////////////////////////////////////
Heavy duty power diodes
Posted: 23 May 2013 07:33 AM PDT
http://forums.qrz.com/showthread.php?392280-Heavy-duty-power-diodes&goto=newpost
Monster-sized, heavy-duty 1N3162 power diode. Measures a .393V drop on my
multimeter in diode test mode. Peak reverse voltage, 100V, I-average is 240
Amps, I-surge is 3000 amps(!!!) Features a 3/4"/16TPI mounting stud. Data
sheet available online.
Syntron power diodes (the smaller two in the picture). Wasn't able to find
datasheets online. They're labeled "5P 50-0042" and "S4040". and both read
an approximate .4V drop in diode test mode.
$15 for all 3, including shipping to the continental US. OR, make me an
offer. Will trade for a time-delay relay, don't care if it's mechanical or
electronic.
///////////////////////////////////////////
ICOM SM-8 DESK MICROPHONE
Posted: 23 May 2013 07:12 AM PDT
http://forums.qrz.com/showthread.php?392276-ICOM-SM-8-DESK-MICROPHONE&goto=newpost
I have a VERY nice ICOM-SM-8 desk microphone for sale.It has only(1)cord
but it works 100% & looks GREAT.It's excess to my needs.All functions work
as designed(up & down buttons,PTT,& lock).It's VERY clean as well.FIRM
shipped price in the lower 48 states is $115 with payment by USPS money
order only.Thanks for looking & your interest.I do NOT have the box,just
the microphone & (1)cord as pictured.:D
Clayton
W4KVW
Attached Images
ICOM SM-8 001.JPG
(1.82 MB)
///////////////////////////////////////////
HWA-7 power supply for HW-7, HW-8 $100.00
Posted: 23 May 2013 06:45 AM PDT
http://forums.qrz.com/showthread.php?392273-HWA-7-power-supply-for-HW-7-HW-8-100-00&goto=newpost
HWA-7-1 power supply for HW-7, HW-8 $100.00
IMG_0693.JPGIMG_0699.JPG
845-489-1543
Attached Images
IMG_0693.JPG
(2.11 MB)
IMG_0699.JPG
(1.73 MB)
///////////////////////////////////////////
Heathkit HW-7 Good condition QRP rig....$75.00
Posted: 23 May 2013 06:34 AM PDT
http://forums.qrz.com/showthread.php?392271-Heathkit-HW-7-Good-condition-QRP-rig-75-00&goto=newpost
Heathkit HW-7 Good condition QRP rig....$75.00
845-489-1543
IMG_0686.jpg
Attached Images
IMG_0686.jpg
(1.63 MB)
///////////////////////////////////////////
Misc Elecraft K2 Parts
Posted: 23 May 2013 05:46 AM PDT
http://forums.qrz.com/showthread.php?392267-Misc-Elecraft-K2-Parts&goto=newpost
This stuff was with some K2 parts that I aquired,maybe someone can use
them! $20 plus $5.80 priority shipping. Pay-pal accepted. E-mail me at:
carlton...@sbcglobal.net if interested.
Attached Images
K2 Misc 001.JPG
(1.23 MB)
K2 Misc 002.JPG
(1.23 MB)
K2 Misc 003.JPG
(1.23 MB)
K2 Misc 004.JPG
(1.25 MB)
K2 Misc 005.JPG
(1.22 MB)
///////////////////////////////////////////
Yaesu FT 450AT
Posted: 23 May 2013 04:17 AM PDT
http://forums.qrz.com/showthread.php?392263-Yaesu-FT-450AT&goto=newpost
I'm selling my FT 450AT, rigs been sitting on my desk for over a year and
not been used more than a couple times, due to just not having enough time
to warm her up. I bought the radio new 3-4 years ago from HRO and have
absolutely no problems with it. There are a few minor scratches on the top,
but other than that it looks like new. It will be sold with the original
box and manual (provided I can find the manual) and I will guarantee it to
be in good working order. I'm reducing the price to $600, any less than
that and she'll continue to sit on my desk. Call or text 209-six05-7one10.
73,
de AF6UJ
Pat
Attached Images
FT 450AT A.JPG
(2.29 MB)
FT 450AT B.JPG
(2.37 MB)
FT 450AT E.JPG
(2.17 MB)
///////////////////////////////////////////
DX Engineering Parts for HF Verticals
Posted: 23 May 2013 04:14 AM PDT
http://forums.qrz.com/showthread.php?392262-DX-Engineering-Parts-for-HF-Verticals&goto=newpost
I willsell as a package for $125 shipped Email me at: N3...@comcast.net
dxe-un-brkt_oh_xl.jpgdxe-aok-tb1193_xl.jpgDXE-TB-3P.jpg
ForSale DX Engineering DX-UN-43-R UnUnbrand new in the box never used. New
price $129+ shipping my price $75 shipped.I will except Paypal+fees or USPS
money order Conus only.
For Sale DX Engineering Tilt Base Mounting Plate brand new in the box never
used. New price $62.50+ shipping my price $45 shipped. I will except
Paypal+fees or USPS money order Conus only.
For Sale DXEngineering Tilt Base Wing Nut Knobsbrand new in the box never
used. New price $7.95+ shipping my price $10 shipped. I will except
Paypal+fees or USPS money order Conus only.
Descriptionfrom DX Engineering Website:
DX Engineering High-Power Multi-Band UNUNswith Maxi-Core® technology allow
your antenna to perform to its fullestpotential and reduce stress on your
equipment. These specially tuned UNUNsdesigned for non-resonant vertical
antenna applications operate moreefficiently than similar competitive
products, which burn up easily on lowerbands with QRO power levels.
DX Engineering high-power UNUNs are specifically designed for applications
with43 ft. non-resonant, multi-band antennas, ensuring the best efficiency
fromyour antenna and transmission line/tuner installation. This results
inminimizing the additional transmission line losses caused by SWR.
DX Engineering Maxi-Core® High-Power Multi-Band UNUNs can be added to
anyexisting 43 ft. antenna installation or used to replace an older
competitiveUNUN for a performance increase. The UN-43-R includes mounting
bracket andfeedpoint connections braids.
Descriptionfrom DX Engineering Website:
DX Engineering Tilt Base Mounting Plate patented*DX Engineering Tilt Base
Mounting Plates enable the operator to raise or loweran antenna in seconds,
while leaving the base securely attached to the mountingpost.
With these stainless steel tilt bases one person can service the antenna.
Thismeans you'll no longer have to climb ladders or remove brackets from
thesupport posts.
Precision-cut from 3/16 in. 304 stainless steel, these Tilt Base
MountingPlates are virtually indestructible. They conveniently mount to the
same mastthat you use for the antenna and Radial Plate. Mounting these Tilt
Bases to aground mounted pipe is accomplished with two optional saddle
clamps, displayedin "Suggested Parts".
Descriptionfrom DX Engineering Website:
DX Engineering wing nut knobs are for thetool-less, quick release of the DX
Engineering DXE-TB-3 or DXE-TB-4 tilt bases.They are perfect for lowering
the antenna for tuning or daily stealthoperation. To install them, simply
remove the existing hex nuts and thread onthe wing nut knobs. The old
hardware can be stored on the tilt base for futureuse. Purchase two sets to
also allow for the tightening of the lower mountinghardware without tools
and for extended periods of upright installation anduse.
Attached Images
dxe-un-brkt_oh_xl.jpg
(179.0 KB)
DXE-TB-3P.jpg
(12.6 KB)
dxe-aok-tb1193_xl.jpg
(60.1 KB)
///////////////////////////////////////////
ICOM 746 PRO EXCELLENT
Posted: 23 May 2013 11:53 AM PDT
http://forums.qrz.com/showthread.php?392300-ICOM-746-PRO-EXCELLENT&goto=newpost
Looks and works like NEW! No smoke, pets, or junk stacked on it! Custom
cover when not in use which is most of the time since I have Flex SDR's.
Have box, mini-manual, mike. Sorry no trades, paypal, or foreign sales.
This is not a distress sale so please no low ball offers. If you are
looking for an excellent example of this fine radio hyou will not be
disappointed. $1050 plus shipping or pick up near Houston, TX. please
e-mail direct at harveywizbang at aol dot com or call me 8 to 8 central
time at nine three six, five two four, two four three one. 73, K3PD
Attached Images
CIMG3315.JPG
(1.02 MB)
CIMG3316.JPG
(1.12 MB)
CIMG3324.JPG
(1.10 MB)
CIMG3321.JPG
(1.19 MB)
///////////////////////////////////////////
MFJ-1274 TNC
Posted: 23 May 2013 11:27 AM PDT
http://forums.qrz.com/showthread.php?392298-MFJ-1274-TNC&goto=newpost
MFJ TNC-2 compatible, used but looks fine and :pworks well. $50 shipped to
US states only via Paypal only.
Email to KK4...@gmail.com for Paypal address.
Attached Images
GEDC0150.JPG
(50.4 KB)
///////////////////////////////////////////
Kenwood TK-370 UHF HT
Posted: 23 May 2013 10:46 AM PDT
http://forums.qrz.com/showthread.php?392297-Kenwood-TK-370-UHF-HT&goto=newpost
32 channel portable HT with good battery, drop in charger, going to new
good home for the right price. $50 shipped to US states only via Paypal
only. Programmed with GMRS channels but can do Amateur UHF as well.
Email to KK4...@gmail.com for Paypal address.
Attached Images
GEDC0160.JPG
(49.5 KB)
///////////////////////////////////////////
three position terminal blocks
Posted: 23 May 2013 09:53 AM PDT
http://forums.qrz.com/showthread.php?392294-three-position-terminal-blocks&goto=newpost
i have a few used three position terminal blocks that work very well to run
more than one radio off one power supply
see picture
it has three 1/4 stud bolts around 1 1/2 inches long
you can used top terminal for minus from power supply and minus to radio,
you can use middle terminal for earth ground, you can use bottom terminal
for plus from power supply and plus voltage to radio
these are heavy duty terminals
6.00 each shipped with one washer and one nut on each terminal
paypal
contact me at r_ta...@comcast.net
Attached Images
MVC-008S.JPG
(109.1 KB)
///////////////////////////////////////////
Cushcraft 6m Beam
Posted: 23 May 2013 09:29 AM PDT
http://forums.qrz.com/showthread.php?392293-Cushcraft-6m-Beam&goto=newpost
Cushcraft (pre-MFJ) 6 meter beam antenna, model A505S. This is a 5 element
beam with 10.5 db gain. I had it mounted on a pole a few years back during
a winter. Haven't used it since so its up for sale. No bent tubing but it
has 2 minor issues. First of all you will have to supply the U-bolts to
mount the antenna to your mast. Second, water had frozen inside of the boom
(about 1 foot from the end) and split the tubing. I have included a
picture of the damage. Since it is at the end of the boom, you wouldn't
have to replace the tubing, but if you did, it may be available from MFJ or
DX Engineering.
Your antenna will be shipped in its original box. Price is $100 and that
includes shipping to those in the 48 states. You may contact me at my call
at ARRL.NET
Thanks,
Greg W8NGA010.JPG011.JPG012.JPG014.JPG
Attached Images
010.JPG
(1.37 MB)
011.JPG
(1.46 MB)
012.JPG
(1.19 MB)
014.JPG
(1.15 MB)
///////////////////////////////////////////
40' American Tower Company series 10 tower
Posted: 23 May 2013 08:46 AM PDT
http://forums.qrz.com/showthread.php?392290-40-American-Tower-Company-series-10-tower&goto=newpost
I have two 10' sections, and one 10' top section, and a 10' mast. It has
the hardware for a hinged base, but the buried portion is not included (it
is under 8 yards of concrete) :(
Tower is in perfect shape.
I paid over $300 for these pieces alone...Id take $50.
Local pickup, or I can offer limited delivery for Central Ohio for mileage
rates.
For best response email to "chris(at sign)n8wct.com".
tower.jpg
Attached Images
tower.jpg
(61.2 KB)
///////////////////////////////////////////
Kenwood TM-255a Plus TM-455a All Mode Transceiver Combo Owner Manual
Schmatics etc
Posted: 23 May 2013 08:14 AM PDT
http://forums.qrz.com/showthread.php?392286-Kenwood-TM-255a-Plus-TM-455a-All-Mode-Transceiver-Combo-Owner-Manual-Schmatics-etc&goto=newpost
Ham Radio All-Mode Transeiver Pair: Rare Kenwood TM-255A and TM-455A
Radios. These are a matched pair, used for Sat and Moon Bounce work but
have features needed for normal repeater and simplex on AM FM CW and SSB.
These little guys do it all. Read the specs below for details. Sold only
together. Have had very little use, been setting in the ham shack without
being used because I never had the necessary antennas. Used a little on
sideband, much better way to talk. In perfect condition, includes original
mics, mobile mounting brackets, owners manuals with schmatics and some
added power cords designed for use in a mobile setup if preferred.
Pictures are of actual radios. Sell on ebay for upwards of $700 for the
pair but I'd rather not deal with ebay. Call if you have questions.
Thanks...Bob Weaver Asking price $450 plus shipping probably around $30.
That price is for both radios, about $225 for an all-mode Kenwood.
All-Mode Transceiver TM-255/455(A/E)
All-mode versatility enters a new era with our innovative TM-255A/E (2 m)
and TM-455A/E (70 cm), both featuring a detachable front panel for easy
mounting in a car. But whether mobile or stationary, these compact
transceivers offer matchless performance -- in FM, SSB and CW modes. Among
their many impressive features are 101 memory channels, DDS with "fuzzy
logic" control, twin tuning dials, and a data connector for 1200/9600 bps
packet communications.
Features at a glance:
2 m (TM-255A/E) or 70 cm (TM-455A/E) all-mode operation
101 memory channels
DDS with "fuzzy logic" control
TF-SET (TX frequency set) function
DTSS selective calling with pager function
1200/9600 bps packet terminal
TM-255/455(A/E) in detail:
40-watt output
Maximum RF output is 40 watts (TM-255A/E), and 35 watts (TM-455A/E). A
HI/LO switch enables power reduction to 5 watts.
100 multi-function memory channels plus 1 call channel
Facilitating on-the-move operation are 101 memory channels, plus memory
shift and memory scroll functions. Channels 50~98 are capable of storing
transmit and receive frequencies independently.
Multi-scan functions
There is a choice of full band and programme band scans, memory scan with
memory channel lock-out, MHz scan and V/M/C scan. The operator can also
select time-operated or carrier-operated scan stop modes, and adjust scan
speed.
Data connector for 1200/9600 bps packet
A 6-pin mini DIN connector lets the operator enjoy either standard 1200 bps
or 9600 bps high-speed packet communications with a TNC.
DDS (Direct Digital Synthesizer) with fuzzy control
We've incorporated "fuzzy logic" control circuitry, so the main encoder
tunes smoothly from fine (5 Hz step) to fast forward (200 Hz step).
Twin tuning dials
In addition to the smooth-action dial on the main unit, there is a
click-type dial on the detachable panel for convenient mobile use.
Dual-menu system
The user-friendly menus -- which are also accessible via the supplied
microphone -- are divided into two groups (A & B) depending on frequency of
use.
Interference reduction
AIP (Advanced Intercept Point) circuitry allows the operator to choose
either high sensitivity or a high intercept point to suit conditions.
IF-SHIFT (SSB, CW) and a pulse noise blanker further improve RX performance.
TF-SET
TF-SET is available when the receive frequency is locked, so the operator
can avoid losing a targeted station.
Multi-function microphone
The supplied remote-control microphone has 4 programmable function keys --
ideal for mobile operation.
Other Features:
Built-in DTSS selective calling with pager
Semi break-in circuit (CW)
Automatic mic gain control circuit (SSB)
Built-in TCXO (temperature-compensated crystal oscillator)
Tone alert system with elapsed time indicator
S-meter squelch
All-mode squelch
Built-in CTCSS encoder & optional decoder (TSU-8)
Auto power-off & time-out timer
Dimensions (W x H x D) 180 x 60 x 215.5 mm (7.0 x 2.4 x 8.5 in.
NOTE: The mic connectors I use allow you to disconnect the mic without
having to remove the faceplate. When used in data mode for sat or moon
work, the mics are not needed and are best removed so you don't accidently
key the radio. You can remove the faceplate, remove the mic cable and
replace it with the mic itself and you will be back to stock. No
modifications were made to the radios, just the added pigtail to the mic.
Attached Images
20130522_103753.jpg
(1.59 MB)
20130522_104125.jpg
(1.17 MB)
20130523_090610.jpg
(1.31 MB)
20130523_090621.jpg
(1.35 MB)
20130523_090635.jpg
(2.11 MB)
///////////////////////////////////////////
Ham Items
Posted: 23 May 2013 07:43 AM PDT
http://forums.qrz.com/showthread.php?392282-Ham-Items&goto=newpost
All these items are new. Have never been used. Paypal only. Will ship
priority within Conus US.
Contact me at Norcalham at gmail dot com. Thanks!
Cho
W6TOY
MFJ 1702C $30 plus $5 shipping
MFJ 564 $50 plus $10 shipping
YSK 857 Sep kit $30 plus $10 shipping
Samlex 1223 $70plus $10 shipping
M2 2m HO Loop $60 plus $10 shipping
Attached Images
image.jpg
(2.20 MB)
image.jpg
(1.91 MB)
image.jpg
(2.09 MB)
image.jpg
(2.25 MB)
image.jpg
(1.83 MB)
///////////////////////////////////////////
Heavy duty power diodes
Posted: 23 May 2013 07:33 AM PDT
http://forums.qrz.com/showthread.php?392280-Heavy-duty-power-diodes&goto=newpost
Monster-sized, heavy-duty 1N3162 power diode. Measures a .393V drop on my
multimeter in diode test mode. Peak reverse voltage, 100V, I-average is 240
Amps, I-surge is 3000 amps(!!!) Features a 3/4"/16TPI mounting stud. Data
sheet available online.
Syntron power diodes (the smaller two in the picture). Wasn't able to find
datasheets online. They're labeled "5P 50-0042" and "S4040". and both read
an approximate .4V drop in diode test mode.
$15 for all 3, including shipping to the continental US. OR, make me an
offer. Will trade for a time-delay relay, don't care if it's mechanical or
electronic.
///////////////////////////////////////////
ICOM SM-8 DESK MICROPHONE
Posted: 23 May 2013 07:12 AM PDT
http://forums.qrz.com/showthread.php?392276-ICOM-SM-8-DESK-MICROPHONE&goto=newpost
I have a VERY nice ICOM-SM-8 desk microphone for sale.It has only(1)cord
but it works 100% & looks GREAT.It's excess to my needs.All functions work
as designed(up & down buttons,PTT,& lock).It's VERY clean as well.FIRM
shipped price in the lower 48 states is $115 with payment by USPS money
order only.Thanks for looking & your interest.I do NOT have the box,just
the microphone & (1)cord as pictured.:D
Clayton
W4KVW
Attached Images
ICOM SM-8 001.JPG
(1.82 MB)
///////////////////////////////////////////
HWA-7 power supply for HW-7, HW-8 $100.00
Posted: 23 May 2013 06:45 AM PDT
http://forums.qrz.com/showthread.php?392273-HWA-7-power-supply-for-HW-7-HW-8-100-00&goto=newpost
HWA-7-1 power supply for HW-7, HW-8 $100.00
IMG_0693.JPGIMG_0699.JPG
845-489-1543
Attached Images
IMG_0693.JPG
(2.11 MB)
IMG_0699.JPG
(1.73 MB)
///////////////////////////////////////////
Heathkit HW-7 Good condition QRP rig....$75.00
Posted: 23 May 2013 06:34 AM PDT
http://forums.qrz.com/showthread.php?392271-Heathkit-HW-7-Good-condition-QRP-rig-75-00&goto=newpost
Heathkit HW-7 Good condition QRP rig....$75.00
845-489-1543
IMG_0686.jpg
Attached Images
IMG_0686.jpg
(1.63 MB)
///////////////////////////////////////////
Misc Elecraft K2 Parts
Posted: 23 May 2013 05:46 AM PDT
http://forums.qrz.com/showthread.php?392267-Misc-Elecraft-K2-Parts&goto=newpost
This stuff was with some K2 parts that I aquired,maybe someone can use
them! $20 plus $5.80 priority shipping. Pay-pal accepted. E-mail me at:
carlton...@sbcglobal.net if interested.
Attached Images
K2 Misc 001.JPG
(1.23 MB)
K2 Misc 002.JPG
(1.23 MB)
K2 Misc 003.JPG
(1.23 MB)
K2 Misc 004.JPG
(1.25 MB)
K2 Misc 005.JPG
(1.22 MB)
///////////////////////////////////////////
Yaesu FT 450AT
Posted: 23 May 2013 04:17 AM PDT
http://forums.qrz.com/showthread.php?392263-Yaesu-FT-450AT&goto=newpost
I'm selling my FT 450AT, rigs been sitting on my desk for over a year and
not been used more than a couple times, due to just not having enough time
to warm her up. I bought the radio new 3-4 years ago from HRO and have
absolutely no problems with it. There are a few minor scratches on the top,
but other than that it looks like new. It will be sold with the original
box and manual (provided I can find the manual) and I will guarantee it to
be in good working order. I'm reducing the price to $600, any less than
that and she'll continue to sit on my desk. Call or text 209-six05-7one10.
73,
de AF6UJ
Pat
Attached Images
FT 450AT A.JPG
(2.29 MB)
FT 450AT B.JPG
(2.37 MB)
FT 450AT E.JPG
(2.17 MB)
///////////////////////////////////////////
DX Engineering Parts for HF Verticals
Posted: 23 May 2013 04:14 AM PDT
http://forums.qrz.com/showthread.php?392262-DX-Engineering-Parts-for-HF-Verticals&goto=newpost
I willsell as a package for $125 shipped Email me at: N3...@comcast.net
dxe-un-brkt_oh_xl.jpgdxe-aok-tb1193_xl.jpgDXE-TB-3P.jpg
ForSale DX Engineering DX-UN-43-R UnUnbrand new in the box never used. New
price $129+ shipping my price $75 shipped.I will except Paypal+fees or USPS
money order Conus only.
For Sale DX Engineering Tilt Base Mounting Plate brand new in the box never
used. New price $62.50+ shipping my price $45 shipped. I will except
Paypal+fees or USPS money order Conus only.
For Sale DXEngineering Tilt Base Wing Nut Knobsbrand new in the box never
used. New price $7.95+ shipping my price $10 shipped. I will except
Paypal+fees or USPS money order Conus only.
Descriptionfrom DX Engineering Website:
DX Engineering High-Power Multi-Band UNUNswith Maxi-Core® technology allow
your antenna to perform to its fullestpotential and reduce stress on your
equipment. These specially tuned UNUNsdesigned for non-resonant vertical
antenna applications operate moreefficiently than similar competitive
products, which burn up easily on lowerbands with QRO power levels.
DX Engineering high-power UNUNs are specifically designed for applications
with43 ft. non-resonant, multi-band antennas, ensuring the best efficiency
fromyour antenna and transmission line/tuner installation. This results
inminimizing the additional transmission line losses caused by SWR.
DX Engineering Maxi-Core® High-Power Multi-Band UNUNs can be added to
anyexisting 43 ft. antenna installation or used to replace an older
competitiveUNUN for a performance increase. The UN-43-R includes mounting
bracket andfeedpoint connections braids.
Descriptionfrom DX Engineering Website:
DX Engineering Tilt Base Mounting Plate patented*DX Engineering Tilt Base
Mounting Plates enable the operator to raise or loweran antenna in seconds,
while leaving the base securely attached to the mountingpost.
With these stainless steel tilt bases one person can service the antenna.
Thismeans you'll no longer have to climb ladders or remove brackets from
thesupport posts.
Precision-cut from 3/16 in. 304 stainless steel, these Tilt Base
MountingPlates are virtually indestructible. They conveniently mount to the
same mastthat you use for the antenna and Radial Plate. Mounting these Tilt
Bases to aground mounted pipe is accomplished with two optional saddle
clamps, displayedin "Suggested Parts".
Descriptionfrom DX Engineering Website:
DX Engineering wing nut knobs are for thetool-less, quick release of the DX
Engineering DXE-TB-3 or DXE-TB-4 tilt bases.They are perfect for lowering
the antenna for tuning or daily stealthoperation. To install them, simply
remove the existing hex nuts and thread onthe wing nut knobs. The old
hardware can be stored on the tilt base for futureuse. Purchase two sets to
also allow for the tightening of the lower mountinghardware without tools
and for extended periods of upright installation anduse.
Attached Images
dxe-un-brkt_oh_xl.jpg
(179.0 KB)
DXE-TB-3P.jpg
(12.6 KB)
dxe-aok-tb1193_xl.jpg
(60.1 KB)
0 new messages