Kenwood TH-28A problem

LoneHamm

unread,

Apr 3, 2013, 10:21:37 PM4/3/13

to

I have a Kenwood TH-28A and have an extended antenna on the unit. I
have been inside and outside to reach a repeater and have not had any
luck. I have even hooked it up to my 2 meter outside antenna.

The settings that I have on it are: - T S APO
Then when I press the LOW button I then see the following: M.

I then press LOW again then it switches to L

Pressing Low for a third time shows: EL

The repeater is set to take in negative.

It is approximately 30+ miles away.

I am at a loss as to what the problem is.

Would someone know what the solution is?

--
LoneHamm

Patty Winter

unread,

Apr 4, 2013, 11:31:18 AM4/4/13

to

In article <LoneHamm...@radiobanter.com>,

LoneHamm <LoneHamm...@radiobanter.com> wrote:
>
>I have a Kenwood TH-28A and have an extended antenna on the unit. I
>have been inside and outside to reach a repeater and have not had any
>luck. I have even hooked it up to my 2 meter outside antenna.

Does the repeater require an access tone? If so, do you have your
radio set to the proper one?

Patty

LoneHamm

unread,

Apr 8, 2013, 6:59:48 PM4/8/13

to

Patty Winter;803414 Wrote:
> In article LoneHamm...@radiobanter.com,
> LoneHamm LoneHamm...@radiobanter.com wrote:-

>
> I have a Kenwood TH-28A and have an extended antenna on the unit. I
> have been inside and outside to reach a repeater and have not had any

> luck. I have even hooked it up to my 2 meter outside antenna.-

>
> Does the repeater require an access tone? If so, do you have your
> radio set to the proper one?
>
>
> Patty

The T is illuminated for the Tone. Yes, a tone is required. But it
still does not hit the repeater.
I can hear others on the repeater, and try to reply but it does not
work.

--
LoneHamm

Patty Winter

unread,

Apr 8, 2013, 7:52:30 PM4/8/13

to

In article <LoneHamm...@radiobanter.com>,
LoneHamm <LoneHamm...@radiobanter.com> wrote:

[snip]

>Patty Winter;803414 Wrote:
>>
>> Does the repeater require an access tone? If so, do you have your
>> radio set to the proper one?
>

>The T is illuminated for the Tone. Yes, a tone is required. But it
>still does not hit the repeater.

And you're sure it's the correct tone?

Is there another ham in your area you could ask for help? Preferably
someone who uses that repeater? They might know of any quirk that's
preventing you from accessing it.

Patty

LoneHamm

unread,

Apr 14, 2013, 9:53:10 PM4/14/13

to

Patty Winter;803557 Wrote:
> In article LoneHamm...@radiobanter.com,
> LoneHamm LoneHamm...@radiobanter.com wrote:
>

> [snip]
>
> -
> Patty Winter;803414 Wrote: -

>
> Does the repeater require an access tone? If so, do you have your

> radio set to the proper one?-

>
> The T is illuminated for the Tone. Yes, a tone is required. But it

> still does not hit the repeater.-

>
> And you're sure it's the correct tone?
>
> Is there another ham in your area you could ask for help? Preferably
> someone who uses that repeater? They might know of any quirk that's
> preventing you from accessing it.
>
>
> Patty

I did have another ham check out the unit. It was found that the
transmit frequency was off, so it got corrected. Now, I can transmit
and receive.

Thanks for the tip.

--
LoneHamm

Channel Jumper

unread,

Apr 16, 2013, 7:49:57 AM4/16/13

to

LoneHamm;803799 Wrote:
> I did have another ham check out the unit. It was found that the
> transmit frequency was off, so it got corrected. Now, I can transmit
> and receive.
>
> Thanks for the tip.

The bottom line is that the repeater is too far away.

Basic physic's 101 - all signals reduce at the square of the distance
away.

You wasted your money when you bought a walkie talkie...

--
Channel Jumper

Michael Black

unread,

Apr 16, 2013, 2:22:07 PM4/16/13

to

He said another ham looked at it, and the rig was off frequency, and now
it works fine.

That sure doesn't sound like an issue of distance, or walkie talkie.

Michael VE2BVW

LoneHamm

unread,

Apr 22, 2013, 2:33:22 PM4/22/13

to

Channel Jumper;803870 Wrote:
> The bottom line is that the repeater is too far away.
>
> Basic physic's 101 - all signals reduce at the square of the distance
> away.
>
> You wasted your money when you bought a walkie talkie...

I for one do not use the Kenwood as a Walkie-Talkie. Evidently you are
NOT a Licensed Ham, which I am.

Additionally, you would know if you were a ham that many repeaters have
offsets which require a frequency difference between input and transmit
exit.

--
LoneHamm

Channel Jumper

unread,

Apr 25, 2013, 7:29:51 AM4/25/13

to

LoneHamm;804070 Wrote:
> I for one do not use the Kenwood as a Walkie-Talkie. Evidently you are
> NOT a Licensed Ham, which I am.
>
> Additionally, you would know if you were a ham that many repeaters have
> offsets which require a frequency difference between input and transmit
> exit.

Eye Rodger - 10-4

Anytime you want - I will meet you up on the Amateur Extra Portion of
the bands and we can talk about it on 20 or 40 meters...

--
Channel Jumper

maoher...@gmail.com

unread,

May 21, 2020, 7:34:42 PM5/21/20

to

Why don´t you simply give your ham radio identification, why come here with agression towards others?

Allodoxaphobia

unread,

May 22, 2020, 9:30:07 AM5/22/20

to

And why are you replying to A THIRTEEN YEAR OLD THREAD?

Oh, I see. YAgg, Yet Another google grooper. Sheesh!

Skylar Wolf

unread,

Dec 10, 2020, 10:12:05 AM12/10/20

to

i shall be a turd and reply just to point out that it's 7 years old, not 13