Description:
Antennas: theory, techniques and construction.
|
|
|
Cobwebb element formula??
|
| |
Is there a formula to set the gamma match on a Cobwebb type element?? as I have built a Cobwebb ant for the higher shortwave broadcast bands using normal unmatched dipoles (468/f) but I don`t think it is optimal hence the need to gamma match!! Regards. Lee ...G6ZSG.
|
|
|
How can one make a dummyload from a LC circuit ?
|
| |
It started when the dummyload was too small for a job. It's for 40 mtrs. But making it is barely possible. It should have a Zo of 50 ohms ? And what about the Q factor ? Looking on my swr meter it gets better when i put my hands near it and at a very small C rate but still in the red. Anyone ?
|
|
|
Noise to signal ratio
|
| |
Wow, the crazies must be having fun today. Out of 67 new posts, only one didn't go to my bozo bin. That guy from Radiobanter must be tearing his hair out...... - 73 de Mike N3LI -
|
|
|
(OT) Inventing a Better Patent System
|
| |
Off topic though this certainly is, I'm posting this because I know that several people who frequently post in rraa have one or more patents, and there have over the years been a number of comments here about the sorry state these days of patents and the patenting process in the USA. Moreover, with some notable exceptions, postings in this newsgroup often show... more »
|
|
|
Mercatino radiantistico italian
|
| |
[link] Mercatino dell'usato per radioamatori interamente realizzato da iz4hyz ( Ezio Tulli ) vuole essere un servizio per permettere l'incontro di tutti quegli appassionati di radio (RADIOAMATORI E NON) che vogliono scambiare materiale radiantistico. Qui puoi vendere, comprare o... more »
|
|
|
Causes of Distrust of NEC and Mininec programs
|
| |
Cebic found when comparing different style programs that some behaved well in certain circumstance where others did not. Yet all antenna programs are based on the use of Maxwells equations where all programs should have the same results, after all Maxwells equations are exact and not fudged. One of the reasons is that since Maxwells laws are exact... more »
|
|
|
folded dipole calculator help
|
| |
Your statement: The fellow I'm disagreeing with say's, "the reason that the variable in the calculator for the "dipole feed impedance" could be if you want to transform the z to something else, such as 50 ohms." I don't even understand what he means. My thoughts: My radio output impedance is 50 ohms, for a feed line I use... more »
|
|
|
|
