Mohr 8" Photo Paper And Film Processor

[Marvin Culpepper]

Mohr 8" Dry To Dry Film & Paper Processor. Ebay item
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1269617681
I will take 800.00 for this item. These little units will do anything. Black
and white or color paper and black and white film. Graphic arts material
also. The will do 8" by whatever. Panoramas are no problem. Their website
can be found at http://209.130.41.226/processor_8.html. This is very
similiar to the current model which I have included specs of following this
ad. The current model sells for $4,400.00. I have never used it but it
appears to power up and work. It is a pretty simple machine. Buyer to pay
shipping. MohrPro 8 Processor The MohrPro 8 is a 9-1/2 inch wide processor
with a semi deep tank, capable of processing 90-8x10 B&W RC prints or
45-8x10 RA-4 color prints dry to dry, per hour. Tank capacity is 96 ounces
of developer and fixer with one gallon of wash water and a fresh water
hookup. Temperature is adjustable from 82 to 98º F. Processing time is also
adjustable from 2 minutes to 6-1/2 minutes dry to dry. The MohrPro 8 can
process a wide variety of B&W line and lith films, Electron Microscope films
4489 or S0-163, and even continuous tone professional films like T-Max,
Tri-X, and Plus-X, in rolls or sheets. In order to process some films, an
optional Extended Time Process Switch, "AP-30" may have to be installed. You
have the option of choosing either the "A" or "B" ranges. The "A" range
development time is 1:40 to 2:38 while the "B" range is 3:12 to 4:16
minutes. Standard Features VARIABLE SPEED. Processing times are easily
adjusted from 2 minutes to 6.5 minutes dry to dry. VARIABLE TEMPERATURE.
Adjustable from 80 to 98 fahrenheit. Lighted indicator shows pre-set
temperature and present temperature. Ready light tells you when processor is
up to operating temperature. FAST HEAT UP. When the main power switch is
activated, the developer and fixer are heated from room temperature to
operating temperature in less than 20 minutes. ENERGY SAVING. Main power
turns on only chemistry heaters, keeping the machine in standby mode. When
the operator is ready to process, the process switch is simply pressed to
turn on the Drive Motor, Dryer and Water Inlet. NO PLUMBING NECESSARY.
Processor comes standard with fresh water hook-up. Should plumbing not be
accessible, an optional water re-circulation system is available to make the
processor stand alone. EASILY MAINTAINED. Racks lift out easily for
maintenance. One piece molded tanks have rounded corners to facilitate easy
cleaning. PLUG IN CONTROL MODULE. All machine controls are housed in one
electronic module that is protected from chemistry spills and fumes. WATER
LEVEL SAFETY. Built-in circuit turns water off automatically if drain should
become clogged, preventing any chance of water overflow. MohrPro 8 Processor
MohrPro 8 Processor ME-42 $4400.00 The processor is set up for B&W and RA-4
color tabletop batch processing. Specifications Materials B&W RC Paper, High
Contrast Film, Continuous Tone Film, RA-4 Color Paper and X-Ray Film (either
rolls or sheets) Processing Width Up to 9¼ inches Processing Length 1 inch
to any Dry to Dry Time 2.0 to 6.5 minutes Transport Speed 5 to 16 inches per
minute Solution Temperature 80° to 98° F Solution Tank Capacity Dev/Fix
3qts. Wash 1 gallon Dev/Fix/Wash Time 30 to 94 seconds Length Capacity 4"
minimum Power Requirements 115 volt, 60 Hz., 8 amps Dimensions 17" H, 15" W,
25" L (36" L w/Daylight Loader) Dry Weight 90 pounds

--