Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Re: 1997 FXDS clutch......
4 views
Skip to first unread message
danin...@gmail.com
May 12, 2012, 1:36:12 AM5/12/12
to
Shirley, plastics on the bar, serve em at will!!
I broke down and picked up a cheap impact wrench today. A Campbell
Hausfeld 1/2" drive. Brandy new for $18.99. The 1 3/16' and 1 1/2'
impact sockets cost more than the wrench cause the only place in town
that had them was NAPA!!!
Anyway
Everyone that offered an opinion or method, I appreciate your input. I
even had locals telling me it was a throw out bearing!
After I pulled the clutch basket out I went over to Kickstarts and he
tried to find various things to compress it with. Typical father, the
kid hid them all!! We went over to a local indy, Mac, to see if he
had anything to compress it with. Of course he had a nifty device
that Danny and I will make a copy of and prolly never use again!!
The first thing I noticed was the little brass disk like parts falling
out with the plates! It seems the spring set had most of the rivets
wore off! Threw those and the 3 damaged plates out and dropped in a
total of five plates. 3 steel and 2 clutch plates. It will go back
in tomorrow and I'll let all ya'll know how it works out!!
danl the no longer clutchless Slug #280
I broke down and picked up a cheap impact wrench today. A Campbell
Hausfeld 1/2" drive. Brandy new for $18.99. The 1 3/16' and 1 1/2'
impact sockets cost more than the wrench cause the only place in town
that had them was NAPA!!!
Anyway
Everyone that offered an opinion or method, I appreciate your input. I
even had locals telling me it was a throw out bearing!
After I pulled the clutch basket out I went over to Kickstarts and he
tried to find various things to compress it with. Typical father, the
kid hid them all!! We went over to a local indy, Mac, to see if he
had anything to compress it with. Of course he had a nifty device
that Danny and I will make a copy of and prolly never use again!!
The first thing I noticed was the little brass disk like parts falling
out with the plates! It seems the spring set had most of the rivets
wore off! Threw those and the 3 damaged plates out and dropped in a
total of five plates. 3 steel and 2 clutch plates. It will go back
in tomorrow and I'll let all ya'll know how it works out!!
danl the no longer clutchless Slug #280
Invisible68
May 13, 2012, 6:07:16 AM5/13/12
to
<danin...@gmail.com> wrote in message
news:kjsrq7p8h7691baam...@4ax.com...
riding to respond...
Invisible68
0 new messages