CSM simulator
Carolyn & Brian McPherson
My guess -now that I've spent several hours looking at options
Is CSM simulater doesn't support the 4 channel Futaba FP-T4NBF
transmitter
The Intest shows 8 channels ?
When I go thru the tranmitter calibration it doesn't pick up the
throttle settings.
(My Old Shuttle trainer is set up with 4 servos
Throttle and pitch are controled by 1 servo)
Anybody got any clues
CSM's web page doesn't mention any limiting factors about Transmitters
I'm not having much luck with postings or emails
What a frustrating self education
Ah the 90's
Brian McPherson
car...@medione.net
Martin.Armitstead
I think you'll be right the CSM isn't compatable with the older
4&6 ch "challenger" type Futaba sets.The csm plugs in via the trainer
i/face right,the new Futaba trainer protocol only works across
Skysport6A/6H,FF6,FF7,FF8 and 9Z radios and this is what the csm i/face
is geared to.I feel sure the older "Futaba Gold" and "Challenger" sets
either use a different trainer lead variant or the protocol is somehow
different.
Martin.
Nick M.V.Salmon
Yo Brian
Try calibrating in Aero90.exe, it's a more up-to-date calibrator
and you'll be asked if your Tx is an aero set there...
Might work to join pitch & throttle together for you...
Ciao...
Nick...
Carolyn & Brian McPherson <car...@mediaone.net> wrote;
:
: My guess -now that I've spent several hours looking at options
: Is CSM simulater doesn't support the 4 channel Futaba FP-T4NBF
: transmitter
:
: The Intest shows 8 channels ?
:
: When I go thru the tranmitter calibration it doesn't pick up the
: throttle settings.
: (My Old Shuttle trainer is set up with 4 servos
: Throttle and pitch are controled by 1 servo)
:
: Anybody got any clues
: CSM's web page doesn't mention any limiting factors about Transmitters
: I'm not having much luck with postings or emails
:
: What a frustrating self education
: Ah the 90's
:
: Brian McPherson
: car...@medione.net
: