Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Tech Advice Needed: Maverick Code

9 views
Skip to first unread message

ckev1

unread,
May 7, 2011, 10:00:05 PM5/7/11
to
My Maverick pin is listing a code at start up, Wheel Entrance: BAD.
When a ball is played at the Lauren Belle, it doesn't lock it,
eventually comes back down the rail, and kicks out another ball to
play. If the second ball is launched, the first one that drops shuts
down that play. So the issue seems to be not locking the ball, any
thoughts what part may be bad?

Lloyd Olson

unread,
May 7, 2011, 10:19:07 PM5/7/11
to
What ever is at the wheel entrance. Opto switch I believe. ( or regular
micro switch ) You'll need to fix that. May need cleaning, adjusting, and
check for broken wires. Then check in switch test. LTG :)

"ckev1" <ck...@juno.com> wrote in message
news:26de5bdc-c69f-47e0...@y31g2000vbp.googlegroups.com...

barakandl

unread,
May 7, 2011, 10:58:21 PM5/7/11
to
Game is telling you a switch is not working (has not been closed in x number of games)

joobie

unread,
May 8, 2011, 9:53:12 AM5/8/11
to
There is a roll under opto switch right before it enters the wheel.
Replace/repair/adjust that and your problems should be over :)

ckev1

unread,
May 8, 2011, 5:05:27 PM5/8/11
to
On May 8, 9:53 am, joobie <jswbodyjewe...@yahoo.com> wrote:
> There is a roll under opto switch right before it enters the wheel.
> Replace/repair/adjust that and your problems should be over :)

Thanks for the replies, I will check that switch and see if cleaing
works, or check for connection...

0 new messages