TZ Knocker Question

[Schukei]

Posting in the hopes I am missing something. Twilight Zone knocker works great and repeatedly in test mode, a continous loud knock.. No binding of plunger and knocker assembly is mounted firmly to backbox. In game play however wheter in replay or match situation the plunger does not move with enough force to be heard. I took the translight off and swung the llight panel out and the plunger does move but does not hit plate with enough force to be heard. Rom is 9.4 CH if that makes a difference and I see no settings in manual for on/off on the knocker. Any ideas?
Thanks in advance
Steve Schukei
CARGPB 24

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com

[Lloyd Olson]

In test it's getting power different.

Inspect the assembly. Right plunger ? Coil sleeve good ? At bottom where
plunger rests, is there a rubber grommet or coil stop ? - if worn or missing
the plunger rides too low in the coil and won't get a full whack. LTG :)

"Schukei" <sch...@hotmail.com> wrote in message
news:12261111...@news.usenet.com...

[juanmaib]

i 've had the same issue, what happened in my case: the pastic part
from the plunger ( what hit to the plate) were missing.
the solution, replace plunger.

good luck,
Juan

[Schukei]

Thanks guys...plastic insert in one end of plunger missing...I should have checked, What a group!
Steve Schukei
"Lloyd Olson" <l...@ssbilliards.com> wrote in message news:r-mdndYLs8f6QInU...@skypoint.com...