Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Flash Gordon after restore startup problems

11 views
Skip to first unread message

patrickvancott

unread,
Jul 1, 2012, 3:00:11 AM7/1/12
to

This machine has been rebuilt from the ground up, I have not assembled
the top of the playfield yet, but I turned it on to see if all the
bulbs, drop targets, slings, ect. worked. The insert lamps flash
really fast and the only solenoid that works is the knocker and
flippers. This machine has a altek board for the CPU and existing
boards for the rest. Anyone know where to start?


--
patrickvancott
This USENET post sent from http://rgparchive.com

pinball whore

unread,
Jul 1, 2012, 3:10:54 AM7/1/12
to
Just give me your game and you can have mine .

Gott Lieb?

unread,
Jul 1, 2012, 6:36:12 AM7/1/12
to

Sounds like the classic fuse under the PF is blown.

Jim

patrickvancott;1964925 Wrote:
> This machine has been rebuilt from the ground up, I have not assembled
> the top of the playfield yet, but I turned it on to see if all the
> bulbs, drop targets, slings, ect. worked. The insert lamps flash
> really fast and the only solenoid that works is the knocker and
> flippers. This machine has a altek board for the CPU and existing
> boards for the rest. Anyone know where to start?


--
Gott Lieb?
0 new messages