Tech Help On ToM

[tonya...@yahoo.com]

Hi guys, I just picked up a ToM. I was looking under the playfield and
there were 4 connectors not hooked up. I hooked them all up except for
one and I dont have a clue. It is a 6 pin conector. 4 red wires and 2
white. Is it not to be hooked up? Any help? Thanks Tony

[IMMark]

Yes, there is a 6 pin connector not used. It is up behind the trunk
area. Mine is red and yellow, but I assume that is the one you are
talking about.
Good luck
Mark

[tonya...@yahoo.com]

awesome thanks for the info, scared I was missing something!

[IMMark]

No problem, us Ohioan's must stick together : )

[tonya...@yahoo.com]

> No problem, us Ohioan's must stick together : )- Hide quoted text -
>
> - Show quoted text -

you wouldn't happen to have a extra wire for the magna save would you?
Mine is missing in the right. The one on the left is there, Looks like
a cap. is in the connector?

[IMMark]

> a cap. is in the connector?- Hide quoted text -

>
> - Show quoted text -

I think you mean the wire for the eddy sensor? If so, it goes from
the eddy sensor board, and is pressed up into the playfield. But
sorry, know I don't have any. Others may, or know where they are
available...I think it is pretty common and used on other machines as
well.
Mark
Mark

[Rich R]

Congrats on the ToM acquisition!
We really enjoy ours!
Rich
Bethlehem, PA

[Lloyd Olson]

If everything is working, don't worry about it. If not, determine by the
wire colors if it's switch matrix, lamp matrix, solenoids, or coils, then
start digging. And lots of games have unused connectors. So if there is
nothing obvious nearby, it isn't used. LTG :)

<tonya...@yahoo.com> wrote in message
news:f6e261b7-00c6-4a06...@72g2000hsu.googlegroups.com...