Has Winston posted recently?

[Wes]

I just noticed that I hadn't noticed Winston from RCM posting recently. Anyone hear from
the gent lately?

Wes

[Jim Wilkins]

He was just on the fun with tractor thread.

Are posts disappearing? I posted a link to Xantrex grid tie inverters
and others kept asking as though they hadn't seen it.

jsw

[Wes]

Jim Wilkins <kb1...@gmail.com> wrote:

>On Mar 29, 8:02�pm, Wes <clu...@lycos.com> wrote:
>> I just noticed that I hadn't noticed Winston from RCM posting recently. �Anyone hear from
>> the gent lately?
>>
>> Wes
>
>He was just on the fun with tractor thread.

Thanks, I see he is alive and kicking.

>
>Are posts disappearing? I posted a link to Xantrex grid tie inverters
>and others kept asking as though they hadn't seen it.

If below, is the post, I saw it. Using forteinc atm.

<7f7ca6a3-68bf-4a7d...@j21g2000yqh.googlegroups.com>

Thanks,

Wes

[Too_Many_Tools]

Yes...I have been slapping him silly in regards to his winger
failings. ;<)

TMT

[Winston]

Anything in particular, Wes? I'm generous to people who call me a 'gent'.

:)

--Winston

[Wes]

Winston <Win...@bigbrother.net> wrote:

>Anything in particular, Wes? I'm generous to people who call me a 'gent'.

No, nothing in particular, it just struck me that I hadn't seen you posting recently.
Guess I was looking at the wrong threads.

Wes

[Winston]

I was tangled up in a thread in another newsgroup (embarrassed cough).

It's OK now because I wore them down; they gave up a week ago.

That means I was right, right? :)

--Winston

[Winston]

Hey there, Too Much Toluene!

Pardon me for responding late but I didn't see your post until
I checked 'all posts' because I wanted to re-read one of Wes' posts.

My newsreader sets your posts 'as read', so I don't see them
normally. :)

I think you are talking about 'Winston_Smith' not Win...@bigbrother.net, yes?

Different people. Mssr. Smith gets involved with political stuff.

BTW, I'm investigating silkscreen & etching to blank some extremely non-
accurate "artistic" parts out of 0.01" galvanized roof flashing.

(Running a stack of these on the mill is problematic.)

I am off to the Art Supplies store today to buy screen and paint
(and to pick their brains a little).

I'm gonna see if I can do this without *any* photographic process, by
using a 'paint pen' to outline a machined shim on to the 'screen.
I hope the ink from the pen will block flow of the screening ink to
give me an exposed line to etch. (Yes, I will paint the other side
of the sheet with resist before etching.)

When that doesn't work, I will check out the 'photographic' way
of doing it.

As always, your metalworking suggestions are welcome.

--Winston <--Slap harder, didn't notice before.

[Wes]

Winston <Win...@bigbrother.net> wrote:

>I was tangled up in a thread in another newsgroup (embarrassed cough).
>
>It's OK now because I wore them down; they gave up a week ago.
>

>That means I was right, right? :)

That seems to be the standard.

Wes