Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Fixed! Tachometer on Clausing VS13 Lathe
2 views
Skip to first unread message
joel
Feb 16, 2010, 10:26:50 AM2/16/10
to
after quite a bit of research, consulting with a friend who's an
electronics geek, etc. the tachometer on my Clausing is fixed! The opto
sensor and the LCD needed to be replaced, and suitable parts were found
at Digikey, but there was still a nasty intermittent problem happening.
finally diagnosed it down to a overheating diode in the power supply.
works like a champ now.
electronics geek, etc. the tachometer on my Clausing is fixed! The opto
sensor and the LCD needed to be replaced, and suitable parts were found
at Digikey, but there was still a nasty intermittent problem happening.
finally diagnosed it down to a overheating diode in the power supply.
works like a champ now.
--Joel
--
remove "xxxnospamxxx" to reach me
0 new messages