Hold my beer...
Ned Simmons
barn doors were scraping and could not be opened all the way. Removing
them is a big job, so I came up with this kluge to trim the door
bottoms. Sliding the the face of the grinder guard on the concrete pad
guides the saw about 5/8" over the pad. The adapter arbor is made from
a heavy nut and large washer, trued up on the lathe after welding. A
cheap 9" carbide blade would be preferable -- the doors are 3-1/2"
thick and have screws in the bottoms -- but the steel skilsaw blade
was on hand and got the job done.
http://www.suscom-maine.net/~nsimmons/news/DoorSaw00.JPG
http://www.suscom-maine.net/~nsimmons/news/DoorSaw01.JPG
--
Ned Simmons
Wes
Wish I could weld that well.
Nice solution for a problem that the typical skill saw can't even get close to.
Gitter Done!
Wes
Buerste
"Ned Simmons" <ne...@nedsim.com> wrote in message
news:g10ns5hjlloo2ucpa...@4ax.com...
Brilliant! Yet somehow...frightening. Let the candle burning at church
COMMENCE!!!
Karl Townsend
Man, that thing would make a great prop for the next Texas chain saw horror
movie
DanG
for over a year using a similar set up on a small grinder with a
smaller blade. The rig caught a nail and tendons and arm caught
the aftermath.
--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
dgri...@7cox.net
"Ned Simmons" <ne...@nedsim.com> wrote in message
news:g10ns5hjlloo2ucpa...@4ax.com...
Larry Jaques
<dgri...@7cox.net> scrawled the following:
>I do know a young floor installer here that lost use of his arm
>for over a year using a similar set up on a small grinder with a
>smaller blade. The rig caught a nail and tendons and arm caught
>the aftermath.
Yeah, that's definitely a two-handed type of saw. But it should have
had enough speed to cut right through the nail without jumping. I
wonder what happened.
The floor trimmer _should_ have been using one of the toe-kick saws
(HF #94626), a Fein Multimaster @ $400, or a HF multifunction tool
#67256 @ $35, which I own and love.
Tip: If you ever kludge up a tool like this, use the least amount of
horsepower possible so if/when it goes rogue, you can get out of the
way (or it will just stall.) Oh, and _pay_attention_ while using it.
---
A book burrows into your life in a very profound way
because the experience of reading is not passive.
--Erica Jong
Ned Simmons
<lja...@diversify.invalid> wrote:
>On Mon, 19 Apr 2010 10:51:49 -0500, the infamous "DanG"
><dgri...@7cox.net> scrawled the following:
>
>>I do know a young floor installer here that lost use of his arm
>>for over a year using a similar set up on a small grinder with a
>>smaller blade. The rig caught a nail and tendons and arm caught
>>the aftermath.
>
>Yeah, that's definitely a two-handed type of saw. But it should have
>had enough speed to cut right through the nail without jumping. I
>wonder what happened.
I had my wife standing by in case I hadn't anticipated all the bad
things that could happen, but with two hands on the grinder and the
guard pressed against the concrete there was no drama.
I told my wife her only function was to hold the door from swinging.
She didn't catch on that a wooden wedge could have served just as well
and that her real job was 911 dialler. <g>
--
Ned Simmons
Ned Simmons
<karltown...@embarqmail.com> wrote:
>
>Man, that thing would make a great prop for the next Texas chain saw horror
>movie
>
The guy who played Leatherface in the original movie was an
acquaintance. He's a good friend of a one-time business partner of
mine and my first wife dated him after we split up. There's probably a
lesson for me in that fact, but I'll be damned if I know what it is.
--
Ned Simmons
Mark Rand
>
>I had my wife standing by in case I hadn't anticipated all the bad
>things that could happen, but with two hands on the grinder and the
>guard pressed against the concrete there was no drama.
>
>I told my wife her only function was to hold the door from swinging.
>She didn't catch on that a wooden wedge could have served just as well
>and that her real job was 911 dialler. <g>
That's cold, very cold.
:-)
Many years ago, a friend of the family, who ran a saw mill, cut two fingers of
with a circular saw. He drove himself to the hospital because he didn't want
to upset his wife. Hospital then phoned his wife to ask if she could find the
fingers and drive them in, so they could try to sew them on again.
Unfortunately it was too late by the time she got them there...
Mark Rand
RTFM
Larry Jaques
<ra...@internettie.co.uk> scrawled the following:
>On Mon, 19 Apr 2010 10:19:34 -0400, Ned Simmons <ne...@nedsim.com> wrote:
>
>
>>
>>I had my wife standing by in case I hadn't anticipated all the bad
>>things that could happen, but with two hands on the grinder and the
>>guard pressed against the concrete there was no drama.
>>
>>I told my wife her only function was to hold the door from swinging.
>>She didn't catch on that a wooden wedge could have served just as well
>>and that her real job was 911 dialler. <g>
>
>That's cold, very cold. :-)
No, Mark. Cold would have been actually _telling_ her.
;)