Re: Jon Banquer invades VX Forum
Cliff
>
>
>"Anne Onime" <anon...@rip.ax.lt> wrote in message
>news:e578a024d210c636...@rip.ax.lt...
>> Well, it was only a matter of time.
>>
>> WordPress shut down Banquer's Blog for MULTIPLE TOS violations so he
>> decided to invade the VX forum.
>>
>> VX only recently made it open to anyone who registers.
>>
>> I give it a couple of weeks before Cliff shows up over there and starts
>> shitting all over the place.
>>
>> VX is in a world of hurt already.
>> They have effectively ZERO US market share and are currently looking for a
>> buyer.
>>
>> Now they get to deal with Babble-on-Jon's rants about what software should
>> be.
>>
>> Oy Vey!
>
>There's no political content in the VX Forum. Why would Cliffie the cross
>posting monkey want to go there?
http://www.vx.com/forum/messageview.cfm?catid=7&threadid=802&highlight_key=y
"Famous for comments and pontifications on software he does not own or use"
"Go away Jon and don't come back."
They had his number from the very beginning and he refused to answer their
very civil questions:
"Can you please advise the forum if you are a VX user, since when and what do
you use it for?"
"For our interest you might also include a list of other CAD/CAM software you
use a professionally."
"And could you also please explain why 'not saying bad things' about the
competition doesn't thrill you?"
(& got snooty about them):
"I've ignored all of what I feel are irrelevant personal questions you asked
me as I feel they have no place in this forum. It's my opinion that this forum
should be about VX and not about personal attacks"
Note that HE was demanding that THEY say "bad things" !!!
--
Cliff
Steve Mackay
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:125ir5tcb7d5nvfnl...@4ax.com...
What does Jon's posts have to do with VX's lack of political content?
I know, typical Cliffy infantile try at redirection.
Or are you just mad that you wont get away with humping his leg?
Cliff
Why not just play "Spot the Idiot"?
On the one hand we have wingers.
Then we have jb.
Hard choice, eh?
>I know, typical Cliffy infantile try at redirection.
How long til he gets banned?
>Or are you just mad that you wont get away with humping his leg?
You might never know any posts of mine <G>.
But what will prompt his next meltdown?
--
Cliff
Doug Miller
> Why not just play "Spot the Idiot"?
> On the one hand we have wingers.
> Then we have jb.
And on the gripping hand, there's.... you.
Lloyd E. Sponenburgh
@news.eternal-september.org:
> And on the gripping hand, there's.... you.
AHAH! Another sci-fi fan! <G>
LLoyd
Snag
The Moties have escaped , the Moties have escaped !
--
Snag
"90 FLHTCU "Strider"
'39 WLDD "PopCycle"
BS 132/SENS/DOF
Lloyd E. Sponenburgh
$iu2....@newsfe15.iad:
> The Moties have escaped , the Moties have escaped !
So... here's one in YOUR eye!
LLoyd
Mark Rand
But, on the gripping hand...
Mark Rand
RTFM
Snag
Sic 'em on the Kzin .
Gunner Asch
We have Moties in Engineering!!!!
Gunner
Cliff
http://www.vx.com/forum/messageview.cfm?catid=7&threadid=805&highlight_key=y
"It would be far better to have it done by a VX expert .."
"I think it was of the guys from down under that warned about him. I think the
best solution is to ignore him and his delusions."
He was indeed pegged as utterly clueless & full of BS right off.
LOL
--
Cliff
Cliff
<lloydspinsidemindspring.com> wrote:
Good catch but I'd wager he will wonder for days what it was.
Then give up.
--
Cliff
Cliff
"We"?
YOU have Tribbles ("Coyote Engineering") !!!
>Gunner
--
Cliff
Larry Jaques
<ra...@internettie.co.uk> scrawled the following:
I started _The Mote in God's Eye_ the night before last. This is my
second read of it, having read ALL available copies of Larry Niven
novels (100+) in the last decade. Havaing just read some Heinlein
recently, I can now say that I've enjoyed Niven's writings a tad more
than even Heinlein's. Norton, Deitz, Drake, Ringo, and Hunter are all
tied for third. ;)
--
In order that people may be happy in their work, these three things are
needed: They must be fit for it. They must not do too much of it. And
they must have a sense of success in it.
-- John Ruskin, Pre-Raphaelitism, 1850
Gunner Asch
<lja...@diversify.invalid> wrote:
>On Tue, 06 Apr 2010 16:04:38 +0100, the infamous Mark Rand
><ra...@internettie.co.uk> scrawled the following:
>
>>On Tue, 06 Apr 2010 07:56:33 -0500, "Lloyd E. Sponenburgh"
>><lloydspinsidemindspring.com> wrote:
>>
>>>"Snag" <snag...@comcast.net> fired this volley in news:hvFun.49247
>>>$iu2....@newsfe15.iad:
>>>
>>>> The Moties have escaped , the Moties have escaped !
>>>
>>>So... here's one in YOUR eye!
>>>
>>>LLoyd
>>
>>But, on the gripping hand...
>
>I started _The Mote in God's Eye_ the night before last. This is my
>second read of it, having read ALL available copies of Larry Niven
>novels (100+) in the last decade. Havaing just read some Heinlein
>recently, I can now say that I've enjoyed Niven's writings a tad more
>than even Heinlein's. Norton, Deitz, Drake, Ringo, and Hunter are all
>tied for third. ;)
David Webers Honor Harrington series..I just finised the the entire lot
over the past 5 days. I think there are 14 of them.
But if you read them...read them in ORDER.
http://www.baen.com/series_list.asp#S1000000001
They are available here and there Free on the internet..including one
that has not been released yet.
Excellent series!!!
Gunner
"First Law of Leftist Debate
The more you present a leftist with factual evidence
that is counter to his preconceived world view and the
more difficult it becomes for him to refute it without
losing face the chance of him calling you a racist, bigot,
homophobe approaches infinity.
This is despite the thread you are in having not mentioned
race or sexual preference in any way that is relevant to
the subject." Grey Ghost
Lloyd E. Sponenburgh
news:hubnr5tbev8tgd26h...@4ax.com:
> David Webers Honor Harrington series..I just finised the the entire lot
> over the past 5 days. I think there are 14 of them.
>
> But if you read them...read them in ORDER.
Yeah, Honor is a weirdly attractive chick. You've got to develop her
character to love her.
LLoyd
Wes
A while back in a search for space, I almost tossed my old paperbacks. I managed to toss
a few periodicals but I couldn't dump the books.
I need to create an index of my scifi and other books that have barcodes. I have a
scanner, I just need a way to turn the barcode data into an entry into a database of what
I have on hand.
I *hate* buying a book I have.
Wes
--
"Additionally as a security officer, I carry a gun to protect
government officials but my life isn't worth protecting at home
in their eyes." Dick Anthony Heller
Larry Jaques
<gunne...@gmail.com> scrawled the following:
>On Tue, 06 Apr 2010 14:22:26 -0700, Larry Jaques
><lja...@diversify.invalid> wrote:
>
>>On Tue, 06 Apr 2010 16:04:38 +0100, the infamous Mark Rand
>><ra...@internettie.co.uk> scrawled the following:
>>
>>>On Tue, 06 Apr 2010 07:56:33 -0500, "Lloyd E. Sponenburgh"
>>><lloydspinsidemindspring.com> wrote:
>>>
>>>>"Snag" <snag...@comcast.net> fired this volley in news:hvFun.49247
>>>>$iu2....@newsfe15.iad:
>>>>
>>>>> The Moties have escaped , the Moties have escaped !
>>>>
>>>>So... here's one in YOUR eye!
>>>>
>>>>LLoyd
>>>
>>>But, on the gripping hand...
>>
>>I started _The Mote in God's Eye_ the night before last. This is my
>>second read of it, having read ALL available copies of Larry Niven
>>novels (100+) in the last decade. Havaing just read some Heinlein
>>recently, I can now say that I've enjoyed Niven's writings a tad more
>>than even Heinlein's. Norton, Deitz, Drake, Ringo, and Hunter are all
>>tied for third. ;)
Oops, forgot Weber.
>David Webers Honor Harrington series..I just finised the the entire lot
>over the past 5 days. I think there are 14 of them.
>
>But if you read them...read them in ORDER.
Absolutely. Our library was missing one and I missed a lot of
reference by not reading it. Yes, excellent. My favorite was
_On Basilisk Station_.
P.S: I'll bet you LOVED her treecat, Nimitz, especially after she
learned to read his feelings during one particular duel. (Crom, I
loved that one.)
Doug Miller
>Absolutely. Our library was missing one and I missed a lot of
>reference by not reading it. Yes, excellent. My favorite was
>_On Basilisk Station_.
If you liked that, you'll probably like "The Excalibur Alternative" too. (Not
part of the Honor Harrington series.)
Gunner Asch
<lja...@diversify.invalid> wrote:
Which duel..Young and the gun, or the other guy with the sword?
<G>
In the last 2 or 3 of the series (and its hardly done yet)...the
treecats are taught Sign Language..and start putting their two cents
in..and people start listening....
Gunner Asch
>"Lloyd E. Sponenburgh" <lloydspinsidemindspring.com> wrote:
>
>>spam...@milmac.com (Doug Miller) fired this volley in news:hpf4vh$gv7$3
>>@news.eternal-september.org:
>>
>>> And on the gripping hand, there's.... you.
>>
>>AHAH! Another sci-fi fan! <G>
>>
>>LLoyd
>
>A while back in a search for space, I almost tossed my old paperbacks. I managed to toss
>a few periodicals but I couldn't dump the books.
>
>I need to create an index of my scifi and other books that have barcodes. I have a
>scanner, I just need a way to turn the barcode data into an entry into a database of what
>I have on hand.
>
>I *hate* buying a book I have.
>
>Wes
Chuckle..Ive got about 6000 books, of which probably 3000 are scifi
...another 1500 are military histories...and I have about 30 multiple
copies, from Heinlein, to Cardnal of the Kremlin....sigh
One book..Ive found 4 different copies of the same book....
Gunner, who hits second hand stores for books. Hardbacks for 35 cents
are a good deal..if you have room....
pyotr filipivich
about Wed, 07 Apr 2010 00:52:29 -0700 did write/type or cause to
appear in rec.crafts.metalworking the following:
>On Tue, 06 Apr 2010 18:28:23 -0400, Wes <clu...@lycos.com> wrote:
>
>>"Lloyd E. Sponenburgh" <lloydspinsidemindspring.com> wrote:
>>
>>>spam...@milmac.com (Doug Miller) fired this volley in news:hpf4vh$gv7$3
>>>@news.eternal-september.org:
>>>
>>>> And on the gripping hand, there's.... you.
>>>
>>>AHAH! Another sci-fi fan! <G>
>>>
>>>LLoyd
>>
>>A while back in a search for space, I almost tossed my old paperbacks. I managed to toss
>>a few periodicals but I couldn't dump the books.
>>
>>I need to create an index of my scifi and other books that have barcodes. I have a
>>scanner, I just need a way to turn the barcode data into an entry into a database of what
>>I have on hand.
>>
>>I *hate* buying a book I have.
>>
>>Wes
>
>
>Chuckle..Ive got about 6000 books, of which probably 3000 are scifi
>...another 1500 are military histories...and I have about 30 multiple
>copies, from Heinlein, to Cardnal of the Kremlin....sigh
>
>One book..Ive found 4 different copies of the same book....
>
>Gunner, who hits second hand stores for books. Hardbacks for 35 cents
>are a good deal..if you have room....
I dumped books last winter - had to go, I just need the space,
them out, etc ... now I'm hitting the second had stores to replace
some of them. Have to carry a list - I have volume 3, need two and
six - ha, there's the anthology!
Oh, and the other day, I bought four dollars worth of paperback -
and found a two dollar bill in one. One more reason to make sure you
remove all your bookmarks before disposing of books.
-
pyotr filipivich
We will drink no whiskey before its nine.
It's eight fifty eight. Close enough!
Larry Jaques
<gunne...@gmail.com> scrawled the following:
>On Tue, 06 Apr 2010 17:01:04 -0700, Larry Jaques
><lja...@diversify.invalid> wrote:
>>P.S: I'll bet you LOVED her treecat, Nimitz, especially after she
>>learned to read his feelings during one particular duel. (Crom, I
>>loved that one.)
>
>Which duel..Young and the gun, or the other guy with the sword?
><G>
Both were excellent, but Young so richly deserved it, the attempted
rapist.
>In the last 2 or 3 of the series (and its hardly done yet)...the
>treecats are taught Sign Language..and start putting their two cents
>in..and people start listening....
Cool, wot? How'd you like to wear a treecat all day?
--
Climb the mountains and get their good tidings. Nature's peace
will flow into you as sunshine flows into trees. The winds will
blow their own freshness into you, and the storms their energy,
while cares will drop away from you like the leaves of Autumn.
-- John Muir
Michael A. Terrell
Wes wrote:
>
> "Lloyd E. Sponenburgh" <lloydspinsidemindspring.com> wrote:
>
> >spam...@milmac.com (Doug Miller) fired this volley in news:hpf4vh$gv7$3
> >@news.eternal-september.org:
> >
> >> And on the gripping hand, there's.... you.
> >
> >AHAH! Another sci-fi fan! <G>
> >
> >LLoyd
>
> A while back in a search for space, I almost tossed my old paperbacks. I managed to toss
> a few periodicals but I couldn't dump the books.
>
> I need to create an index of my scifi and other books that have barcodes. I have a
> scanner, I just need a way to turn the barcode data into an entry into a database of what
> I have on hand.
>
> I *hate* buying a book I have.
See if you can find one of the old 'Cuecat' barcode readers. There
were hacks online to use it as a straight barcode reader.
--
Lead free solder is Belgium's version of 'Hold my beer and watch this!'
Cliff
>Talk talk, talk and talk
>Talk talk, sweet talk
>Talk talk, tough talk
>Talk talk, dirty talk
>Talk talk, walk and talk
>Talk talk, big talk
>
>Talk talk, talk and talk
>Talk talk, smooth talk
>Talk talk, body talk
>Talk talk, back talk
>Talk talk, small talk
>Talk talk, baby talk
>Talk talk, peace talk
>Talk talk, bullshit
Yer new meds not working out, eh?
--
Cliff
Joe788
wrote:
> On Thu, 8 Apr 2010 21:12:55 -0700 (PDT), Joe788 <larryro...@yahoo.com> wrote:
> >Talk talk, talk and talk
> >Talk talk, sweet talk
> >Talk talk, tough talk
> >Talk talk, dirty talk
> >Talk talk, walk and talk
> >Talk talk, big talk
>
> >Talk talk, talk and talk
> >Talk talk, smooth talk
> >Talk talk, body talk
> >Talk talk, back talk
> >Talk talk, small talk
> >Talk talk, baby talk
> >Talk talk, peace talk
> >Talk talk, bullshit
>
> Yer new meds not working out, eh?
> --
> Cliff
LOL! I don't even know what to make of Jon's new problem.
Cliff
He's a bundle of psychosis wrapped in ads he's clueless about & idiocy.
--
Cliff
Wes
> Oh, and the other day, I bought four dollars worth of paperback -
>and found a two dollar bill in one. One more reason to make sure you
>remove all your bookmarks before disposing of books.
Years ago, I was staying at a Comfort Suites when I was contracted to bring up the servers
from my old employer that had been stored so a guy from Deloitte and Touche could grab a
copy of the data on them for string analyisis. Bankruptcy stuff, I guess they were
looking for incriminating data.
I put a 5 spot in the book I was reading as a marker and when I made it back to my room, I
saw a note with thanks and a smiley face signed housekeeping. :(
I'm sure glad I didn't use a twenty.
Wes
Wes
>> I *hate* buying a book I have.
>
>
> See if you can find one of the old 'Cuecat' barcode readers. There
>were hacks online to use it as a straight barcode reader.
I've been looking for an open source ISBN to title library. The bar codes seem to have
the ISBN number in the barcode iirc. It has a been a while since I looked into this so I
might be a bit off base.
Wes
Cliff
<Clhuprich...@aoltmovetheperiodc.om> wrote:
How jb got there: http://www.youtube.com/watch?v=PWcc2hCwsWM
Michael A. Terrell
You can enter the ISBN into ABEBOOKS, or a similar site to get data
on that item.
Cliff
<Clhuprich...@aoltmovetheperiodc.om> wrote:
> How jb got there: http://www.youtube.com/watch?v=PWcc2hCwsWM
>
>>
>> He was indeed pegged as utterly clueless & full of BS right off.
http://www.vx.com/forum/messageview.cfm?catid=5&threadid=808&highlight_key=y
[
I was never impressed with Autodesk Inventor.
For sure I am now...
... direct modeling and with much stronger 2 1/2 axis milling ....
... Based on my two years of working in Qualcomm's machine shop where we used
Mastercam exclusively for machining, I'm convinced that Mastercam takes far too
much time to create 2 1/2 axis mill programs ....
] - Yonnie (bunko) Bonkers
Not a VX user, cannot reply to questions, too utterly clueless .. just posting
ads.
Cannot use MasterCam either.
"(A Mastercam solid can only be one color.)" - Yonnie (bunko) Bonkers
It's one entity, right?
"My impression was that feature based machining in Mastercam .." - Yonnie
(bunko) Bonkers
IOW he's never used it.
" ... something as simple as solid drilling it failed and failed miserably.
..."
http://www.mastercamforum.com/viewtopic.php?f=8&t=10
.187 is NOT the same as .1875 or .1865 or .1873!!
And when you have two differently sized holes selecting
a large one with a + selection tolerance will not find the
smaller ones. But if you select a smaller one it may find the larger
ones.
Naturally these may be selected as multiple sets ...
http://www.mastercamforum.com/viewtopic.php?f=8&t=14
"Mask on arc" works just fine for the non-clueless.
And nobody that does not know simple things such as
1875 > 1873 has any business pretending to be a programmer
of any sort.
He STILL has no clues !!!
--
Cliff
Cliff
Looks like they chased hm out of http://www.vx.com/forum/
too, with just a few simple questions (he had no clues, as usual).
JonBanquer ..... gone (or banned).
--
Cliff
Krister_L
wrote:
>
>
> Looks like they chased hm out of http://www.vx.com/forum/
> too, with just a few simple questions (he had no clues, as usual).
> JonBanquer ..... gone (or banned).
> Cliff
Just wish sombody could chase You and Bonker out of here too.....talk
about invading forums.
// Krister
Cliff
I usually don't post to CCS anymore unless about bonkers banquer
though I do read other posts.
>
>// Krister
HTH
--
Cliff
Krister_L
wrote:
> On Tue, 4 May 2010 00:24:43 -0700 (PDT), Krister_L
>
> >On 29 Apr, 13:19, Cliff <Clhuprichguessw...@aoltmovetheperiodc.om>
> >wrote:
>
> >> Looks like they chased hm out of http://www.vx.com/forum/
> >> too, with just a few simple questions (he had no clues, as usual).
> >> JonBanquer ..... gone (or banned).
>
> >> Cliff
>
> >Just wish sombody could chase You and Bonker out of here too.....talk
> >about invading forums.
>
> I usually don't post to CCS anymore unless about bonkers banquer
> though I do read other posts.
>
>
>
> >// Krister
>
> HTH
> --
> Cliff
But this is a SolisWorks Forum....and none of the shit Your'e posting
here has any relevanse to SolidWorks ..what so ever.
Are You too fucking dumb to understand that or what????
// Krister
Joe788
> Are You too fucking dumb to understand that or what????
>
> // Krister
That you have to even ask speaks volumes.
Wok Dissuade
"Krister_L" <krister_...@hotmail.com> wrote in message
news:db3ce104-94b3-4c24...@k19g2000yqm.googlegroups.com...
Cliff has become the JonBanquer that he claims to despise. He has
JonBanquered his way into misc.survivalism and just shits in the newsgroup
as if he was shitting in his own living room. Do yourself a favor and
JonBanquer him back at the newsgroup that spawned him,
rec.crafts.metalworking
Joe788
Banquer posted about Siemens and their bad marketing years ago.
How's it going trying to get Jon Banquer banned on the VX Forum,
Dave? ;>)
Cliff
<krister_...@hotmail.com> wrote:
>On 4 Maj, 10:31, Cliff <Clhuprichguessw...@aoltmovetheperiodc.om>
>wrote:
>> On Tue, 4 May 2010 00:24:43 -0700 (PDT), Krister_L
>>
>> <krister_landkv...@hotmail.com> wrote:
>> >On 29 Apr, 13:19, Cliff <Clhuprichguessw...@aoltmovetheperiodc.om>
>> >wrote:
>>
>> >> � Looks like they chased hm out of �http://www.vx.com/forum/
>> >> too, with just a few simple questions (he had no clues, as usual).
>> >> � JonBanquer ..... gone (or banned).
>>
>> >> Cliff
>>
>> >Just wish sombody could chase You and Bonker out of here too.....talk
>> >about invading forums.
>>
>> � I usually don't post to CCS anymore unless about bonkers banquer
>> though I do read other posts.
>>
>>
>>
>> >// Krister
>>
>> HTH
>> --
>> Cliff
>
>But this is a SolisWorks Forum....
I thought it was for yonnie (bunko) bonkers to
spread his valued instructios.
>and none of the shit Your'e posting
>here has any relevanse to SolidWorks ..what so ever.
Nor does much else posted to CCS these days it seems
(and I did not start this or the brain-dead winger threads
either <VBG>).
>Are You too fucking dumb to understand that or what????
So post your problems here.
I'm not stopping you.
>// Krister
IF you find anything *interesting* ....
clearly this thread was of interest to you.
Switching to VX are you?
If not, why not?
--
Cliff
Cliff
Spelling checker worked !!!
--
Cliff
Cliff
I failed to see MS (a hotbed of wingers) in the list.
Ever actually use VX?
Clearly yonnie (bunko) bonkers never has.
--
Cliff
Joe788
Joe788
*exactly* the moment Jon
Banquer tumbled down the stairs towards the exit.
How long did it take Jon Banquer to get banned on the VX Forum,
Dave? ;>)
Cliff
>How long did it take Jon Banquer to get banned on the VX Forum,
Looked like about a week or so.
Not a record but still ....
--
Cliff
Cliff
<Clhuprich...@aoltmovetheperiodc.om> wrote:
> http://www.vx.com/forum/messageview.cfm?catid=7&threadid=802&highlight_key=y
> "Famous for comments and pontifications on software he does not own or use"
> "Go away Jon and don't come back."
He's still trying to drill some holes ....
http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&highlight_key=y
--
Cliff
Haywood JaBlowme
Apparently it's not going very well at all for Dave Ault as Jon
Banquer is still active and posting there. : )
Jon Banquer's posts this week can also be read at WorldCAD Access.
It also doesn't seem to be going very well for many of the morons in
these newsgroups as many industry veterans are now lining up behind
Jon Banquer's views on CADCAM.
Here are a few industry veterans echoing exactly what Jon Banquer said
on the VX forum about the need to easily change something like counter
bored holes to countersunk holes in a CADCAM system:
Dr Kannan of Geometric. Geometric is by far the worlds leading
developer of feature recognition tools as well as the owner of
CAMWorks:
"When we talk of “the best of both worlds”, I would like to see a
modeller with direct edit with robust automatic feature recognition
rather than having a history tree with direct edit. Because if I want
to change a countersunk hole into a counterbore hole or vice versa, I
don't see any easier way with direct edit. Instead, if I move the
cursor near a countersunk, the modeller should automatically highlight
the countersunk and it should provide options in the UI to convert
this into other hole types. Same case with patterns on imported
models, sheet metal stamped features, etc."
Paul Hamilton of Parametric Technology Corporation:
"In the world of history-free/direct modeling there is always more
progress that can be made in recognizing geometrical relationships
within non-native data, and then warping useful and intelligent
functionality around what is recognized. Dr. Kannan and GSSL is
certainly pushing things in the right direction."
Bottom line is that Jon Banquer is once again light years ahead of his
critics.
Joe788
wrote:
Bottom line is that once again Jon Banquer is so insane he forgets
which username he's logged into while going through and rating all of
his own posts made by himself while posting as someone else, while
talking about himself in the third person.
LOL!
Cliff
<haywoodj...@yahoo.com> wrote:
>Here are a few industry veterans echoing exactly what Jon Banquer said
>on the VX forum about the need to easily change something like counter
>bored holes to countersunk holes in a CADCAM system:
Still trying to find out how to drill holes, eh?
LMAO !!!
--
Cliff
Cliff
<haywoodj...@yahoo.com> wrote:
>Bottom line is that Jon Banquer is once again light years ahead of his
>critics.
And you can read all about it on his bog !!!
http://jonbanquer.wordpress.com/
--
Cliff
Cliff
<Clhuprich...@aoltmovetheperiodc.om> wrote:
> http://www.vx.com/forum/messageview.cfm?catid=7&threadid=802&highlight_key=y
> "Famous for comments and pontifications on software he does not own or use"
> "Go away Jon and don't come back."
http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&highlight_key=y
He was asked to put up again so he ran & shut up (as usual).
Too easy.
--
Cliff
Cliff
>
>"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
>news:jlnj261js4h0ft2sl...@4ax.com...
>In the very recent past I've done a tremendous amount of CAD remodeling and
>CAM programming for electrical engineers who frequently don't understand
>what is needed to machine a part or make parts for a reasonable cost. By way
>of example, I'd would often do things like change 100 counterbored holes to
>100 countersunk holes which significantly reduced cycle time at the CNC
>machine and as a result significantly reduced part cost. I'm not aware of
>any CAD, CAM or CADCAM system that lets you quickly and easily change 100
>counterbored holes to 100 countersunk holes on a "dumb" solid. For sure,
>SpaceClaim can't. In fact, SpaceClaim doesn't even have a hole wizard for
>native holes, yet it can do this:
>
>
>Yep, dipshit is still drilling holes in pcboards on that beat fadel.
> After reading the above I am convinced he is retarded to some extent.
>
He also claimed to be working for Qualcom, as if that
should impress real CAD?CAM or CAM users.
AFAIK a hole is a hole. And he STILL has problems
trying to learn how to drill them (as far as he ever gets).
Those videos he claimed to have did him no good so I
doubt he ever really got or watched them.
--
Cliff
Cliff
<haywoodj...@yahoo.com> wrote:
>as many industry veterans are now lining up behind
>Jon Banquer's views on CADCAM.
Lies.
You are just copying from THEIR ADS.
Their ads were first.
--
Cliff
Cliff
<haywoodj...@yahoo.com> wrote:
>Here are a few industry veterans echoing exactly what Jon Banquer said
>on the VX forum about the need to easily change something like counter
>bored holes to countersunk holes in a CADCAM system:
They asked for examples of YOUR problems with holes !!!
You claimed to be unable to document any such because
YOU WORK FOR QUALCOM.
How any lies in a row was that?
--
Cliff
Cliff
<haywoodj...@yahoo.com> wrote:
>Jon Banquer's posts this week can also be read at WorldCAD Access.
And you can read all about it on his bog !!!
http://jonbanquer.wordpress.com/
--
Cliff
Cliff
<haywoodj...@yahoo.com> wrote:
>Apparently it's not going very well at all for Dave Ault as Jon
>Banquer is still active and posting there. : )
He has indeed shown you to be utterly clueless & a scammer.
Pretty funny !!
Keep up the good work !!!
Best Wishes
--
Cliff
Haywood JaBlowme
wrote:
> On May 7, 12:52 am, Joe788 <larryro...@yahoo.com> wrote:
>
> > The true beauty of Dave Ault is reading him echo *exactly* what Jon
> > Banquer posted about Siemens and their bad marketing years ago.
>
> > How's it going trying to get Jon Banquer banned on the VX Forum,
> > Dave? ;>)
>
> Siemens has done so far marketing their CADCAM products.
>
> What does Siemens have to say?
>
> http://tinyurl.com/37lh66w
More comments from Jon Banquer about Siemens, NX, NX CAM Express and
Solid Edge ST can be found here:
http://www.youtube.com/watch?v=b5O1ZbDws3g
Jon Banquer has been a member of Delcam's Featurecam Forum for many
years now. Read what Jon Banquer has to say about the current state of
Featurecam on the Delcam Featurecam forum.
Don't miss Jon Banquer's latest comments on the WorldCAD Access Blog:
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:qj3u26pvbnhdblne3...@4ax.com...
Spot Cliff still sniffing around Banquer's butt. Did you check up there for
WMDs? Laugh @ Cliff!
Joe788
Solid Edge ST can be found here:
http://joncluelessbanquer.blogspot.com/
Jon Banquer has been a member of Delcam's Featurecam Forum for many
years now. Read what Jon Banquer has to say about the current state of
Featurecam on the Delcam Featurecam forum.
http://joncluelessbanquer.blogspot.com/
Don't miss Jon Banquer's latest comments on the WorldCAD Access Blog:
Joe788
What kind of lunatic spams their *comments* on blogs and youtube
videos? You are seriously nuts.
Cliff
It warms my heart to know now that yonnie (bunko) bonkers has
found a buddy to sniff him !!!
Find those "WMDs" yet?
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:g61136l85kohgngoh...@4ax.com...
Did you look up Yonnie's butt? What's that turd on your nose? Laugh, laugh,
laugh!
Cliff
Find those "WMDs" yet?
Feel free to put up or shut up like clueless does <Snicker>
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:71l336tgogllnupd3...@4ax.com...
Maybe you can use your snake light to light up his butt. Sticking your head
inside in the dark didn't yield much of a result. Hey, did you color your
hair brown? <chortle>
Cliff
>
>
>"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
>news:71l336tgogllnupd3...@4ax.com...
>> On Sun, 4 Jul 2010 11:28:09 -0500, "Liberal Leroy" <le...@libland.lib>
>> wrote:
>>
>>>
>>>
>>>"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
>>>news:g61136l85kohgngoh...@4ax.com...
>>>> On Sat, 3 Jul 2010 09:29:14 -0500, "Liberal Leroy" <le...@libland.lib>
>>>> wrote:
>>>
>>>> Find those "WMDs" yet?
>>>> --
>>>> Cliff
>>>
>>>Did you look up Yonnie's butt? What's that turd on your nose? Laugh,
>>>laugh,
>>>laugh!
>>
>> Find those "WMDs" yet?
>>
>> Feel free to put up or shut up like clueless does <Snicker>.
>> --
>> Cliff
>
>Maybe you can use your snake light to light up his butt. Sticking your head
>inside in the dark didn't yield much of a result. Hey, did you color your
>hair brown? <chortle>
Find those "WMDs" yet?
Feel free to put up or shut up like clueless does <Snicker>.
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:jnq5369dauuqkf01s...@4ax.com...
Did you find them yet? Judging by the smell you were really close! Did you
use the snake light like you promised? Put fresh batteries in, no, not it
your vibrator silly!
Cliff
Looney Leroy,
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:s2n836tu7q9g12rs3...@4ax.com...
Some flashlights have loose connections and don't work right just when you
need them. Sometimes a good whack makes them work right, for a while. If you
shoved your flashlight way up your ass and still can't find your WMD, try
giving it a good whack! Report back for more helpful hints.
Cliff
Pull a banquer ..... LOL ... (or ask him about his mother).
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:p37b36t06mg3soalj...@4ax.com...
Well no, you shouldn't be looking up banquer's ass, stick the light up your
own ass. Boy, you really have a hard on for Yonnie, chasing after him all
over the internet while he takes the high road and ignores you. Laugh,
laugh, laugh! Find those WMD yet?
Cliff
>> Looney Leroy,
>> Find those "WMDs" yet?
>> Feel free to put up or shut up like clueless does <Snicker>.
>> Pull a banquer ..... LOL ... (or ask him about his mother).
>> --
>> Cliff
>
>Well no, you shouldn't be looking up banquer's ass, stick the light up your
>own ass. Boy, you really have a hard on for Yonnie, chasing after him all
>over the internet while he takes the high road and ignores you. Laugh,
>laugh, laugh! Find those WMD yet?
Find those "WMDs" yet?
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:am2f3653jrbqjrb68...@4ax.com...
Two words. Ass snake light. Ok, make that three. Now find those WMD and quit
sniffing banquer's ass. Are you jealous of him? Laugh @ Cliff Huprich.
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:5psg36946faf60tpk...@4ax.com...
> Find my snake light yet?
> --
> Cliff
Umm, no, you'll have to retrieve that one on your own thankyouverymuch.
Did you try one of these?
http://www.amazon.com/Wireless-Waterproof-Plumbing-Inspection-removeable/dp/B00273Y8AQ
Cliff
<Clhuprich...@aoltmovetheperiodc.om> wrote:
> http://www.vx.com/forum/messageview.cfm?catid=7&threadid=802&highlight_key=y
> "Famous for comments and pontifications on software he does not own or use"
> "Go away Jon and don't come back."
>
> They had his number from the very beginning and he refused to answer their
>very civil questions:
> "Can you please advise the forum if you are a VX user, since when and what do
>you use it for?"
> "For our interest you might also include a list of other CAD/CAM software you
>use a professionally."
> "And could you also please explain why 'not saying bad things' about the
>competition doesn't thrill you?"
>
>
>(& got snooty about them):
> "I've ignored all of what I feel are irrelevant personal questions you asked
>me as I feel they have no place in this forum. It's my opinion that this forum
>should be about VX and not about personal attacks"
>
> Note that HE was demanding that THEY say "bad things" !!!
After being asked by several to put up ... then called on his BS ...
http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&STARTPAGE=2
[
Hi Jon,
didn't see any VX stuff there...?
This isn't the Mastercam forum....
]
So the clueless one finds another video ad (about something else)
to post & runs ... as usual. No clues there, that's certain.
--
Cliff
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:6c9k36d8eak8otit7...@4ax.com...
Did you try the inspection tool? I said "tool", not "stool" you fudge
packer!
Cliff
What is it with repressed wingers & their projection?
http://en.wikipedia.org/wiki/Psychological_projection
As long as you harm nobody else who cares what you secret desires are?
(Other than other wingers & fundies.)
You need to get out of the closet.
You wingers can play with each other & even get that long-needed
potty training your mothers forgot. (Probably smell better too.)
Find those "WMDs" yet?
--
Clff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:7trl36lkck7iau4ks...@4ax.com...
Did you find your stool yet? Careful, your pea brain might be in there!
Joe788
> "Cliff" <Clhuprichguessw...@aoltmovetheperiodc.om> wrote in message
>
> news:7trl36lkck7iau4ks...@4ax.com...
>
>
>
> > On Sun, 11 Jul 2010 21:26:43 -0500, "Liberal Leroy" <le...@libland.lib>
> > wrote:
>
> >>news:6c9k36d8eak8otit7...@4ax.com...
> >>> On Sat, 10 Jul 2010 12:36:48 -0500, "Liberal Leroy" <le...@libland.lib>
> >>> wrote:
>
> >>>>> Find my snake light yet?
> >>>>> --
> >>>>> Cliff
>
> >>>>Umm, no, you'll have to retrieve that one on your own thankyouverymuch.
> >>>>Did you try one of these?
>
> >>> Find those "WMDs" yet?
>
> >>Did you try the inspection tool? I said "tool", not "stool" you fudge
> >>packer!
>
> > What is it with repressed wingers & their projection?
> > http://en.wikipedia.org/wiki/Psychological_projection
> > As long as you harm nobody else who cares what you secret desires are?
> > (Other than other wingers & fundies.)
> > You need to get out of the closet.
>
> > You wingers can play with each other & even get that long-needed
> > potty training your mothers forgot. (Probably smell better too.)
>
> > Find those "WMDs" yet?
> > --
> > Clff
>
> Did you find your stool yet? Careful, your pea brain might be in there!
Nice to see someone trying to help Cliffy on his level. Hope you have
a lot of time.
Cliff
He's trying to imitate (poorly) you, yonnie.
Tell him about your mama.
You are funny still !!!
HTH
--
Cliff
Cliff
Find those "WMDs" yet?
Your War Heroes: DeadEye Dickie & herr shrubbie ....
http://marc.perkel.com/images/bush-medal.gif
See also the Chickenhawk Database. And "famous lairs".
They grow them big in Texas, eh?
--
Cliff
Cliff
You were demoing "fool". Learn to spell.
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:j2to36d84o0at2ob6...@4ax.com...
Yes, you are a fool as well as a fudge packer. Still sifting through your
stool looking for your pea brain? Use a flashlight you buttmuncher.
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:0sro369531rt1rh48...@4ax.com...
Why are you so jealous on Yonnie? He takes the high road and ignores you,
but you like sniffing his ass. Didf you hide the WMD in his ass? Use your
snake light!
Cliff
>
>
>"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
>news:j2to36d84o0at2ob6...@4ax.com...
>> On Sun, 11 Jul 2010 21:26:43 -0500, "Liberal Leroy" <le...@libland.lib>
>> wrote:
>>
>>>
>>>
>>>"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
>>>news:6c9k36d8eak8otit7...@4ax.com...
>>>> On Sat, 10 Jul 2010 12:36:48 -0500, "Liberal Leroy" <le...@libland.lib>
>>>> wrote:
>>>
>>>>>> Find my snake light yet?
>>>>>> --
>>>>>> Cliff
>>>>>
>>>>>Umm, no, you'll have to retrieve that one on your own thankyouverymuch.
>>>>>Did you try one of these?
>>>>>http://www.amazon.com/Wireless-Waterproof-Plumbing-Inspection-removeable/dp/B00273Y8AQ
>>>>>
>>>>
>>>> Find those "WMDs" yet?
>>>>
>>>Did you try the inspection tool? I said "tool", not "stool" you fudge
>>>packer!
>>
>> You were demoing "fool". Learn to spell.
>>
>> Find those "WMDs" yet?
>> --
>> Cliff
>
>Yes, you are a fool as well as a fudge packer. Still sifting through your
>stool looking for your pea brain? Use a flashlight you buttmuncher.
Rethugs like to party in Texas.
http://tinyurl.com/36dfqu5
Cliff
Cliff
<Clhuprich...@aoltmovetheperiodc.om> wrote:
> http://www.vx.com/forum/messageview.cfm?catid=7&threadid=802&highlight_key=y
> "Famous for comments and pontifications on software he does not own or use"
> "Go away Jon and don't come back."
He went away ....
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote:
> I like sniffing Jon's balls
> --
> Cliff
Don't waste your time sniffing his balls when you could be searching his
asshole for WMD. Find your WMD yet?
Cliff
You seem to be the teabagger.
http://www.urbandictionary.com/define.php?term=teabagger
What does Palin say about your "WMDs"?
Find them yet?
BTW, It seems that teabagger hero & leader brietbart
sez that the way to "win" is to lie (as you do as in forging posts & etc.)
Typical winger.
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:06ij46pnd0a1h2eba...@4ax.com...
Oh no, don't lie and forge. Just stick your snake light up your ass. I'm
sure you will find them with a little bit of light. Check behind your pea
brain!
Cliff
Found those "WMDs" yet?
Wingers lied.
About a million died.
--
Cliff
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:fsql46dvtb937knbs...@4ax.com...
Did you look up their assholes? Try looking up your own first!
Cliff
Found those "WMDs" yet?
Ask your heroes.
But they may lie to you yet again.
Liberal Leroy
"Cliff" <Clhuprich...@aoltmovetheperiodc.om> wrote in message
news:4boo46dpnfjfn1ug5...@4ax.com...
The heroes say you should look for your WMD behind your pea brain. So use
the snake light up your ass and you will find them. Just pull your head out
first. What will you do with your WMD once you find them Cliff? Stick them
up your ass again for safe keeping? Maybe you should let Obam know where
they are, he can help you look for them.
Cliff
Found those "WMDs" yet?
Southern racist & Klanner in Good Standing, are you?
Your mother was a republican.
--
Cliff
Cliff
<Clhuprich...@aoltmovetheperiodc.om> wrote:
>On Tue, 13 Apr 2010 02:41:15 -0400, Cliff
><Clhuprich...@aoltmovetheperiodc.om> wrote:
>
>>On Fri, 09 Apr 2010 19:25:00 -0400, Cliff
>><Clhuprich...@aoltmovetheperiodc.om> wrote:
>>
>>> How jb got there: http://www.youtube.com/watch?v=PWcc2hCwsWM
>>>
>>>>
>>>> He was indeed pegged as utterly clueless & full of BS right off.
>>
>> http://www.vx.com/forum/messageview.cfm?catid=5&threadid=808&highlight_key=y
>>[
>>I was never impressed with Autodesk Inventor.
>>
>>For sure I am now...
>>
>> ... direct modeling and with much stronger 2 1/2 axis milling ....
>>
>> ... Based on my two years of working in Qualcomm's machine shop where we used
>>Mastercam exclusively for machining, I'm convinced that Mastercam takes far too
>>much time to create 2 1/2 axis mill programs ....
>>
>>] - Yonnie (bunko) Bonkers
>>
>> Not a VX user, cannot reply to questions, too utterly clueless .. just posting
>>ads.
>> Cannot use MasterCam either.
>>
>> "(A Mastercam solid can only be one color.)" - Yonnie (bunko) Bonkers
>>
>> It's one entity, right?
>>
>> "My impression was that feature based machining in Mastercam .." - Yonnie
>>(bunko) Bonkers
>>
>> IOW he's never used it.
>>
>> " ... something as simple as solid drilling it failed and failed miserably.
>>..."
>>
>> http://www.mastercamforum.com/viewtopic.php?f=8&t=10
>>
>> .187 is NOT the same as .1875 or .1865 or .1873!!
>> And when you have two differently sized holes selecting
>>a large one with a + selection tolerance will not find the
>>smaller ones. But if you select a smaller one it may find the larger
>>ones.
>> Naturally these may be selected as multiple sets ...
>> http://www.mastercamforum.com/viewtopic.php?f=8&t=14
>>
>> "Mask on arc" works just fine for the non-clueless.
>> And nobody that does not know simple things such as
>>1875 > 1873 has any business pretending to be a programmer
>>of any sort.
>>
>> He STILL has no clues !!!
>
> Looks like they chased hm out of http://www.vx.com/forum/
>too, with just a few simple questions (he had no clues, as usual).
> JonBanquer ..... gone (or banned).
From VX to/about yonnie (bunko) bonkers :
http://www.vx.com/forum/messageview.cfm?catid=4&threadid=825&highlight_key=y
"There is no way of putting the brakes on safely so I am going to try to bring
this to a screeching halt. I am sorry to have deleted some of the messages but
this needs to stop."
--
Cliff
Cliff
http://www.vx.com/forum/messageview.cfm?catid=4&threadid=827&highlight_key=y
"But we are now entering a new environment. Comments will be restricted to
discussing the company and the software."
--
Cliff