Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

MT6 to MT5 or less

3 views
Skip to first unread message

Joe AutoDrill

unread,
Mar 30, 2010, 8:54:08 AM3/30/10
to
Morse taper adapter quest....

Anyone out there have a MT6 to MT5, MT4, MT3 or even an MT2 adapter they
would want to part with?

McMaster has #6 to #5 and #4...

MSC has them too...

But if someone has this semi-rare bird and wanted to sell it at a decent
price, I would consider purchasing it from a friend rather than brand new,
etc.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill

V8013-R

Ignoramus28422

unread,
Mar 30, 2010, 10:18:16 AM3/30/10
to
On 2010-03-30, Joe AutoDrill <auto...@yunx.com> wrote:
> Morse taper adapter quest....
>
> Anyone out there have a MT6 to MT5, MT4, MT3 or even an MT2 adapter they
> would want to part with?
>
> McMaster has #6 to #5 and #4...
>
> MSC has them too...
>
> But if someone has this semi-rare bird and wanted to sell it at a decent
> price, I would consider purchasing it from a friend rather than brand new,
> etc.

I have a shipload of them. I can sell you a MT6->MT5 adapter for $15
plus $12 shipping. A MT6->MT5->MT4->MT3->MT2->MT1 set is $50. If you
can pay me in the next hour, I can ship it today, otherwise I am going
on a trip in 2 hours.

i

Ignoramus28422

unread,
Mar 30, 2010, 10:26:40 AM3/30/10
to
I also have MT5 to MT1, truly a rate bird.

Also MT3 extensions, MT4 extensions, MT3 to MT4 (mt3 shank, holds MT4
drills). Basically 1.5 buckets of fun stuff.

i

On 2010-03-30, Joe AutoDrill <auto...@yunx.com> wrote:

Joe AutoDrill

unread,
Mar 30, 2010, 10:40:00 AM3/30/10
to
> I have a shipload of them. I can sell you a MT6->MT5 adapter for $15
> plus $12 shipping. A MT6->MT5->MT4->MT3->MT2->MT1 set is $50. If you
> can pay me in the next hour, I can ship it today, otherwise I am going
> on a trip in 2 hours.

Well then... That's nice to know!

I'll catch you when you return. My customer hasn't placed the order yet.
If / when they do, I'll grab a few different sizes and keep 'em in stock.

Good condition I suppose?
--

Ignoramus28422

unread,
Mar 30, 2010, 11:08:52 AM3/30/10
to
On 2010-03-30, Joe AutoDrill <auto...@yunx.com> wrote:
>> I have a shipload of them. I can sell you a MT6->MT5 adapter for $15
>> plus $12 shipping. A MT6->MT5->MT4->MT3->MT2->MT1 set is $50. If you
>> can pay me in the next hour, I can ship it today, otherwise I am going
>> on a trip in 2 hours.
>
> Well then... That's nice to know!
>
> I'll catch you when you return. My customer hasn't placed the order yet.
> If / when they do, I'll grab a few different sizes and keep 'em in stock.
>
> Good condition I suppose?

Yes, most are in good condition. I try to throw away the bad noes.

i

Karl Townsend

unread,
Mar 30, 2010, 11:42:59 AM3/30/10
to
By chance have MT4 to MT5?

Karl

Ignoramus28422

unread,
Mar 30, 2010, 11:50:04 AM3/30/10
to
On 2010-03-30, Karl Townsend <karltown...@embarqmail.com> wrote:
> By chance have MT4 to MT5?
>

Yes, made by Collis USA. Its tang was rewelded, it seems, but they did
a good job at that. Otherwise it looks great. $20 plus PMFR+$1 shipping.

Be careful with any smaller to higher morse taper adapters, you may
get in trouble very quickly. Too much torque for the shank. Use your
pinky finger only on the downfeed handle.

If you pay in the next 10 minutes I can ship now, otherwise next week.

i

Gunner Asch

unread,
Mar 30, 2010, 8:03:43 PM3/30/10
to
On Tue, 30 Mar 2010 08:54:08 -0400, "Joe AutoDrill" <auto...@yunx.com>
wrote:

>Morse taper adapter quest....
>
>Anyone out there have a MT6 to MT5, MT4, MT3 or even an MT2 adapter they
>would want to part with?
>
>McMaster has #6 to #5 and #4...
>
>MSC has them too...
>
>But if someone has this semi-rare bird and wanted to sell it at a decent
>price, I would consider purchasing it from a friend rather than brand new,
>etc.

I may have some. Ill check later today and post.

Gunner

>
>Regards,
>Joe Agro, Jr.
>(800) 871-5022
>01.908.542.0244
>Automatic / Pneumatic Drills: http://www.AutoDrill.com
>Multiple Spindle Drills: http://www.Multi-Drill.com
>Production Tapping: http://Production-Tapping-Equipment.com/
>Flagship Site: http://www.Drill-N-Tap.com
>VIDEOS: http://www.youtube.com/user/AutoDrill
>
>V8013-R
>
>


"First Law of Leftist Debate
The more you present a leftist with factual evidence
that is counter to his preconceived world view and the
more difficult it becomes for him to refute it without
losing face the chance of him calling you a racist, bigot,
homophobe approaches infinity.

This is despite the thread you are in having not mentioned
race or sexual preference in any way that is relevant to
the subject." Grey Ghost

GeoLane at PTD dot NET

unread,
Mar 30, 2010, 10:45:14 PM3/30/10
to
On Tue, 30 Mar 2010 09:26:40 -0500, Ignoramus28422
<ignoram...@NOSPAM.28422.invalid> wrote:

>I also have MT5 to MT1, truly a rate bird.
>
>Also MT3 extensions, MT4 extensions, MT3 to MT4 (mt3 shank, holds MT4
>drills). Basically 1.5 buckets of fun stuff.

You wouldn't happen to have an extra adapter for the hole in a
Clausing lathe would you? I think it's a MT 4.5

RWL

Ignoramus28422

unread,
Mar 30, 2010, 10:50:03 PM3/30/10
to

nope

0 new messages