Description:
Boat building, design, restoration, and repair.
|
|
|
homebuilt power cat?
|
| |
A few days ago I was at the beach in Asbury Park, NJ and saw what appeared to be a homebuilt power cat heading south along the coast. On a hunch I headed down to Manasquan inlet and sure enough it came in to the inlet.....probably heading south via intracoastal waterway for the winter. I estimate it was approx 30 ft. long and did not look like any... more »
|
|
|
Glenn Ashmore ??
|
| |
Has anyone heard from Glenn Ashmore regarding his boat project?
|
|
|
Not a hate crime...
|
| |
In article <MPG.255664cbedf450fd989...@ne ws.eternal-september.org>, justwaitafrekinmin...@gmail.co m says... ...Sorry, wrong group...
|
|
|
help with boat that was sold illegally
|
| |
I'm in GA and bought a boat from someone who got it from someone else. It came from and is currently still registered in FL, where the someone else supposedly got it from "his brother". The person I got it from gave me a notorized bill of sale, but the someone else he got it from didn't give him anything, never has had the... more »
|
|
|
Pouring a 7000 lb. lead ballast keel
|
| |
I finally got around to updating my website with my adventure pouring a 7000 lb. ballast keel. Things can, and DO, go wrong. If you're interested in how I did it, and perhaps how I should have done it differently, take a look at: [link] Mark
|
|
|
RAPIST ALERT! Wilbur Hubbard is a rapist!
|
| |
RAPIST! You don't own a boat and NEVER DID. [link] Gregory Hall aka Wilbur Hubbard aka Neal Warren is Cecil Warren, a convicted rapist: He's a RAPIST AND A COWARD! How to make the grief stop?? I'll tell you how... drop dead! Or, if you're unwilling to do that, never post to Usenet again.... more »
|
|
|
Registration questions
|
| |
I bought an old 1977 runabout and want to get it registered in GA, but the last time it was registered was in FL. So far I haven't been able to contact the last person who registered it, or even find out who they are. The GA DNR told me to contact the FL DNR, but it looks like in FL the DMV handles boat... more »
|
|
|
NPT and BSP taper threads
|
| |
I am looking at getting some water filters, 20 inch housings, with 3/4 inch NPT female connections in plastic tops. Can I get away with screwing in 3/4 BSP TAPER male brass compression fittings, using a good wind of PTFE tape?? Both NPT and BSPT are 14 TPI and the nominal NPT is 1.050 inch OD and BSPT is... more »
|
|
|
|
