Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
remote controllable transponder
1 view
Skip to first unread message
Stu Fields
Sep 9, 2009, 2:51:30 PM9/9/09
to
Anyone know of a transponder that can have the codes switched from a remote
set of switches and a remote Ident button? I guess I'm asking if there are
access points in a connector where this could be done, or has some whiz
already done this? My helicopter likes it when I keep my hands on the
controls. Landing to change the transponder code is not something that is a
reasonable alternative.
set of switches and a remote Ident button? I guess I'm asking if there are
access points in a connector where this could be done, or has some whiz
already done this? My helicopter likes it when I keep my hands on the
controls. Landing to change the transponder code is not something that is a
reasonable alternative.
Stu Fields
John Clear
Sep 9, 2009, 3:08:47 PM9/9/09
to
In article <xJ-dnVdLG-qrZDrX...@linkline.com>,
Dunno about changing the code remotely. Some of the new push button
transponders might have support for that. Remote ident is available,
one of the rental planes I learned on back in the dark ages had
remote ident on the yoke, and remote flip-flop. Some avionics tech
must have had some extra switches and wire laying around, since
both were a bit ridiculous in a Piper Cherokee. Avionics were
King, IIRC.
John
--
John Clear - j...@panix.com http://www.clear-prop.org/
JohnO
Sep 9, 2009, 6:45:23 PM9/9/09
to
On Sep 10, 7:08 am, use...@jac.users.panix.com (John Clear) wrote:
> In article <xJ-dnVdLG-qrZDrXnZ2dnUVZ_gedn...@linkline.com>,
> In article <xJ-dnVdLG-qrZDrXnZ2dnUVZ_gedn...@linkline.com>,
Microair have an external ident facility, but not code select.
JohnO
Sep 9, 2009, 6:51:04 PM9/9/09
to
Same goes for the Becker.
0 new messages