The group you are posting to is a
Usenet group . Messages posted to this group will make your email address visible to anyone on the Internet.
Your reply message has not been sent.
Your post was successful
Newsgroups: rec.aviation.homebuilt
From:
"Richard Isakson" <r... @whidbey.com> Date: Mon, 21 Nov 2011 15:56:46 -0800
Local: Mon, Nov 21 2011 6:56 pm
Subject: V-12
You must
Sign in before you can post messages.
You do not have the permission required to post.
Newsgroups: rec.aviation.homebuilt
From:
Orval Fairbairn <orfairba... @earthlink.net> Date: Mon, 21 Nov 2011 19:24:19 -0500
Local: Mon, Nov 21 2011 7:24 pm
Subject: Re: V-12
In article <jaeoft$93
... @speranza.aioe.org>,
"Richard Isakson" <r
... @whidbey.com> wrote:
I didn't see him installing piston rings, though he had machined grooves
for them.
What a piece of work!
You must
Sign in before you can post messages.
You do not have the permission required to post.
Newsgroups: rec.aviation.homebuilt
From:
Dan <B24... @aol.com> Date: Mon, 21 Nov 2011 19:20:17 -0600
Local: Mon, Nov 21 2011 8:20 pm
Subject: Re: V-12
On 11/21/2011 6:24 PM, Orval Fairbairn wrote:
> In article<jaeoft$93
... @speranza.aioe.org>,
> "Richard Isakson"<r
... @whidbey.com> wrote:
>> Next time you're moping around and need a project, try one of these:
>> http://www.wimp.com/tiniestengine/
>> Rich Isakson
> I didn't see him installing piston rings, though he had machined grooves
> What a piece of work!
I wish I had the patience to make something like that. CNC would be
cheating.
Dan, U.S. Air Force, retired
You must
Sign in before you can post messages.
You do not have the permission required to post.
Newsgroups: rec.aviation.homebuilt
From:
Alan Baker <alangba... @telus.net> Date: Mon, 21 Nov 2011 18:25:59 -0800
Local: Mon, Nov 21 2011 9:25 pm
Subject: Re: V-12
You must
Sign in before you can post messages.
You do not have the permission required to post.
Newsgroups: rec.aviation.homebuilt
From:
Dan <B24... @aol.com> Date: Mon, 21 Nov 2011 23:50:36 -0600
Local: Tues, Nov 22 2011 12:50 am
Subject: Re: V-12
On 11/21/2011 8:25 PM, Alan Baker wrote:
15 years? And I thought I was bad having spent 3 years on a steam
locomotive and only 1/4 done.
Dan, U.S. Air Force, retired
You must
Sign in before you can post messages.
You do not have the permission required to post.
Newsgroups: rec.aviation.homebuilt
From:
Alan Baker <alangba... @telus.net> Date: Mon, 21 Nov 2011 22:55:52 -0800
Local: Tues, Nov 22 2011 1:55 am
Subject: Re: V-12
You must
Sign in before you can post messages.
You do not have the permission required to post.
Newsgroups: rec.aviation.homebuilt
From:
"Atheist Chaplain" <abu... @cia.gov> Date: Tue, 22 Nov 2011 20:07:55 +1100
Local: Tues, Nov 22 2011 4:07 am
Subject: Re: V-12
"Dan" <B24
... @aol.com> wrote in message
news:z5adnSGwqdhOZVfTnZ2dnUVZ_radnZ2d@giganews.com ...
> On 11/21/2011 6:24 PM, Orval Fairbairn wrote:
>> In article<jaeoft$93
... @speranza.aioe.org>,
>> "Richard Isakson"<r
... @whidbey.com> wrote:
>>> Next time you're moping around and need a project, try one of these:
>>> http://www.wimp.com/tiniestengine/
>>> Rich Isakson
>> I didn't see him installing piston rings, though he had machined grooves
>> What a piece of work!
> I wish I had the patience to make something like that. CNC would be
> Dan, U.S. Air Force, retired
1220 hours used to make that :-)
CNCc would cut that drastically but I agree with you, it would be cheating.
--
You must
Sign in before you can post messages.
You do not have the permission required to post.
Newsgroups: rec.aviation.homebuilt
From:
Dan <B24... @aol.com> Date: Tue, 22 Nov 2011 09:14:29 -0600
Local: Tues, Nov 22 2011 10:14 am
Subject: Re: V-12
On 11/22/2011 3:07 AM, Atheist Chaplain wrote:
> "Dan" <B24... @aol.com> wrote in message
news:z5adnSGwqdhOZVfTnZ2dnUVZ_radnZ2d@giganews.com ...
... @speranza.aioe.org>,
... @whidbey.com> wrote:
>>>> Next time you're moping around and need a project, try one of these:
>>>> http://www.wimp.com/tiniestengine/
>>>> Rich Isakson
>>> I didn't see him installing piston rings, though he had machined grooves
>>> What a piece of work!
>> I wish I had the patience to make something like that. CNC would be
>> Dan, U.S. Air Force, retired
> 1220 hours used to make that :-)
I'd love to see his plans. Cooling fins on the jugs would have been a
nice touch.
I cringed when I saw him take the crank shaft to the grinder. Even a
Dan, U.S. Air Force, retired
You must
Sign in before you can post messages.
You do not have the permission required to post.
