If you want to get picky, it's also controlled by the driver's right
foot. Eh?
Max
>Max
nah, the thermostat still controls the coolant flow.. if you have a
deficiency in the flow department, that is beyond the control of the
thermostat... even further down your turn, if you remove the belt, even the
driver's foot is taken out of the loop...
A buddy of mine observed an engine on a dyno where the thermostat was
opening then closing as each pull was performed.
Max
>A buddy of mine observed an engine on a dyno where the thermostat was
>opening then closing as each pull was performed.
>Max
absolutley, but that is due to waste heat from the engine being placed under
load on the dyno, not by the position of the throttle... the two may be
linked, but they are not absolute.. for example an(our aircooled engines)
can, and will, put off more waste heat in a higher gear at low rpms with the
throttle at X position than it will in a proper gear that puts the engine in
it's most efficient range at the same throttle position... and to tie this
back into our dear friend Al's original post, that is why they recommend
loading and heating up the engine in a high gear at lower rpm's to seat the
rings...
Of course. My point was that the thermostat really can _regulate_
engine temp (within a certain range), not just open and stay open like
many people seem to think.
My comment about the throttle earlier was to point out that the amount
of heat being generated is influenced strongly by how hard the
operator insists on pushing the engine. Meaning that if the engine is
getting too hot, slowing down will probably help.
Al? Oh yeah...
IGoogle is showing this as a new thread. I missed that you meant to
continue the previous one (that Jan likes so much). :D
Max
>Of course. My point was that the thermostat really can _regulate_
>engine temp (within a certain range), not just open and stay open like
>many people seem to think.
and that is no different than my statements in the "other" thread...
>My comment about the throttle earlier was to point out that the amount
>of heat being generated is influenced strongly by how hard the
>operator insists on pushing the engine. Meaning that if the engine is
>getting too hot, slowing down will probably help.
I agree
>Al? Oh yeah...
>IGoogle is showing this as a new thread. I missed that you meant to
>continue the previous one (that Jan likes so much). :D
I didn't mean to continue that thread, this was intended as a stand alone
thread, just in response to the expert information given by Al in the
"other" thread...
Anyone know where to find a thermostat for a '31 Buick? :D
Same principle... sits behind the radiator (outside of it, not in water)
and opens/closes shutters behind the rad to control (yikes!) air flow
through the rad.
> Anyone know where to find a thermostat for a '31 Buick? :D
> Same principle... sits behind the radiator (outside of it, not in water)
> and opens/closes shutters behind the rad to control (yikes!) air flow
> through the rad.
hmm.. interesting... Can't help ya there either...
I have a couple OG style stats in reserve. There will come a time when
even the used ones are gone.
Max
yep... I've kept every one I've come across...
I did too.. but let go of my stash (of everything) when I moved here. Argh.
the things men do for....um.... love....hehe