Description:
Mazda MX-5 Miata Forum.
|
|
|
What doesn't work....and a question
|
| |
Cut-to-fit hoses. Total crap. I bought them from Autozone(I know, you may commence insulting me now...) when I was doing the water pump/ timing belt job on my 97 NA. I needed new hoses, the originals were a little crusty looking and I wanted to drive the car. I noted when I was installing them that the fit was rather shoddy....... more »
|
|
|
Limping home
|
| |
Heard a weird creaking (no, not the exhaust, haha) as I backed out of my parking spot. Pulled out onto the highway and all of a sudden there's this violent oscillation, kinda like you'd get with a bent axle/wheel only felt like it was up and down as well as side to side... jelly-like feel to the... more »
|
|
|
bad mass air flow meter?
|
| |
hi, you might remember my 95 m-ed w/ an eaton s/c has been stalling on deceluration, (and on start up i discovered), since i dont have the sst the factory manual uses to diag issues, i just used my multi meter. initially i pulled the MAF and cleaned it up and it seemed to get better, until the second time i drove the car errrr... i started to... more »
|
|
|
Creaky exhaust on Miata NC
|
| |
Hi, The exhaust on my 2008 2.0i Sport NC has really got creaky of late - and by creaky I mean that as it expands/contracts, you can really hear the darned thing, even while the engine is still on. I've never known a noisier steel exhaust and it's so crazy I wonder if anyone else has experienced this?... more »
|
|
|
Best exterior rubber protector and renewer?
|
| |
'91 Miata. The exterior rubber around the windshield, around the door windows and window wiper blades and door jams. Getting hard and not very supple over the years. I want to renew them, perk them up, and protect against upcoming winter. I have found nothing at AUTO ZONE and another auto chain. They have... more »
|
|
|
just remember
|
| |
I saw this site and I like it so much, I'd like to see it to learn a lot of things [link]
|
|
|
project time lhd -> rhd
|
| |
hi, its getting time for another project and i am thinking of doing a rhd conversion on a to be obtained miata. has anyone done this? i havent found any detailed sites which discuss a project like this, are there ones i missed? Are there any brit's on the list who would like to help me obtain spares or at least get me i contact with miata "boneyards" in... more »
|
|
|
WOW! New radio....
|
| |
Just put the original AM/FM Cassette unit back into my Miata after my cheap aftermarket unit died. It's about the only thing that looks like it was made for the car and works. I usually listen only to ESPN on the AM radio so I won't miss the FM or the CD player but I will miss the larger cubby under the radio... Oh,... more »
|
|
|
Valve Cover Gasket - Where to buy?
|
| |
All, When I did the WP, hoses, belts...all that stuff on my 97 a few months back, I got all my parts from Rock Auto. The valve cover gasket I used was a "Fel Pro VS50364R". The box clearly stated to install the gasket dry, which I did, with the exception of putting dots of sealer at the six bearing cap... more »
|
|
|
|
