Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

5 pin xlr wiring

2 views
Skip to first unread message

teai...@yahoo.com

unread,
May 12, 2008, 7:43:24 PM5/12/08
to
Excuse my laziness, folks,

Got to make up a 2x3FXLR to 1x5MXLR splitter cable tomorrow - anyone
care to tell me the standard wiring config (ie two balanced channels,
left and right) - it's to go into my schoeps splitter (just in case
that makes it different). Obviously, I'll get out the multimeter and
check whilst I'm doing it, but nice to know what I'm SUPPOSED to be
finding in advance.

Cheers all,

Jez

Gtrew

unread,
May 12, 2008, 8:25:05 PM5/12/08
to

1 SHIELD
2 LEFT +
3 LEFT -
4 RIGHT +
5 RIGHT -

Tim Perry

unread,
May 12, 2008, 8:46:28 PM5/12/08
to

<teai...@yahoo.com> wrote in message
news:7dffee75-5045-4cb6...@a1g2000hsb.googlegroups.com...

normal audio XLR:
Pin 1 shield
Pin 2 hot (+)
pin 3 cold (-)

most likely the pinout you need is here:
http://www.schoeps.de/E-2004/xlr.html


it shows channel II as pin 4 (+)
and pin 5 (-)


teai...@yahoo.com

unread,
May 13, 2008, 8:38:03 PM5/13/08
to
Thanks Glen & Tim!

I'll double check as I do it but that makes very good sense!

Cheers, Jez

0 new messages