Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Cutting MKE1 kevlar cable (and soldering)
8 views
Skip to first unread message
Soundiego
Nov 11, 2009, 8:39:03 AM11/11/09
to
Hi Guys,
I bought a Sennheiser MKE-1 lav with Lemo. But, since I use Lectro WL,
I need it to have TA5F. Where I bought it they didn't have the TA5F
option and I need it and couldn't wait.
Do you have experience in cutting the thin kevlar calbe and
resoldering TA5F? is this possible?
thanks
I bought a Sennheiser MKE-1 lav with Lemo. But, since I use Lectro WL,
I need it to have TA5F. Where I bought it they didn't have the TA5F
option and I need it and couldn't wait.
Do you have experience in cutting the thin kevlar calbe and
resoldering TA5F? is this possible?
thanks
Eric Toline
Nov 11, 2009, 9:17:18 AM11/11/09
to
Cutting the cable should not be a problem. Re-tinning the wires might
be if they have a varnish type coating on them. If so you'll have to
burn away the coating with a match or lighter to get to bare metal.
The wiring for the TA5 is hot (+) to pin 3, ground (-) to pin 1, jump
pins 2&4.
Eric
vin
Nov 12, 2009, 1:00:10 PM11/12/09
to
better a lighter with a blue flame - if you have to burn something -
wont leave black soot...
wont leave black soot...
-vin
0 new messages