Lectro to Sennheiser G2 adapter

[Jason Porter]

Hi,

Does anyone here know of an adapter (or just the wiring scheme, if
possible) to use my COS-11's (wired for Lectro) with a Sennheiser G2
transmitter?

I made one for a Tram, but the Tram died (I never liked it anyway...)

Thanks

-Jason

[audi...@bellsouth.net]

This should work. From a TA5M to a 3.5mm trs.

TA5 pin 1 shield to 3.5mm sleeve
TA5 pin 2 positive to 3.5mm tip
TA5 pin 3 negative to 3.5mm sleeve

If you have a problem then eliminate the pin 3 connection.

Eric

[Mark O'Russa]

I believe you have to have a separate power supply for the Cos-11 with
the 100 series G2 as they don't have a bias power supply. Call your
favority location sound store and they can surely help you.

Mark

[Robert K]

Hello Mark,
We have wired many COS-11's for sennheiser and not had any powering
issues. As for the adapter, I have half a dozen on order and will have
feedback on them from the field within a week. I'll let everyone know
how it turns out.
Thanks,
Robert

[Jason Porter]

Eric,

I am sure you are aware of this...but YOU are the MAN!!

Worked like a charm on my COS-11's, but not my B6's. (just FYI to the
group)

Thanks

-JP

[audi...@bellsouth.net]

On Aug 1, 6:42 pm, Jason Porter <sound.mi...@hotmail.com> wrote:
> Eric,
>
> I am sure you are aware of this...but YOU are the MAN!!
>
> Worked like a charm on my COS-11's, but not my B6's. (just FYI to the
> group)
>
> Thanks
>
> -JP
>

Jason,

try this for the B6.

TA5 pin 3 to tip, Pin 1 to sleeve.

Eric

[Martin Harrington]

They wofk fine with the cos 11, been using one like that for months

"Martin Harrington
www.lendanear-sound.com
0414 913 247
Mark O'Russa" <cmus...@gmail.com> wrote in message
news:1185999718.2...@e9g2000prf.googlegroups.com...

--
M