Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

inside the canopy

0 views
Skip to first unread message

Kelly

unread,
Mar 22, 2004, 8:39:21 PM3/22/04
to
I have read a couple of DIY pages on canopies but I have a question about
the finish inside.
All the write ups I have read say to use a oil based paint on the inside but
is there a certain
amount of time I need to wait before using the canopy after painting? I
guess I am most worried
about condensation. If there are drops on the paint and then they fall into
the water won't they
take some contaminants with them? My reflector will be about 3 inches short
on each side
lengthwise.


Kelly


Ken N

unread,
Mar 22, 2004, 10:39:25 PM3/22/04
to
Kelly,

I used a high gloss oil based marine paint. Being an oil based paint it will
take a little longer to cure. I waited for the "chemical" smell to dissipate
before using. As long as you keep it in a area of low humidity and above 65
degrees it should cure rather quickly. A small space heater will also help
along the process. Here is a link to my hood during construction. I am no
expert but I would wait at least 3 or 4 days
https://home.comcast.net/~kensn/images/hood2.jpg

Ken N.


"Kelly" <f...@foo.com> wrote in message
news:dzM7c.881987$ts4.384107@pd7tw3no...

Kelly

unread,
Mar 23, 2004, 1:31:30 AM3/23/04
to
> I used a high gloss oil based marine paint. Being an oil based paint it
will
> take a little longer to cure.

Thanks Ken, is the marine paint from a normal store? i.e. Home Depot or is
it something that needs to be found in a marine store?


Kelly


Ken N

unread,
Mar 23, 2004, 11:58:08 AM3/23/04
to
I live in Washington State and purchased it from Parker paint. I do not
believe Home Depot or Lowes in our area carry much in the way of oil base
any more. You are better off going to a good paint store for it.
Also I might add that it is really better to put on at least three light
coats of paint with a good oil base brush. You will find the finish will get
smoother with each coat, and you will end up with a really reflective, and
durable finish.

Ken


"Kelly" <f...@foo.com> wrote in message

news:6RQ7c.885143$X%5.667997@pd7tw2no...

Kelly

unread,
Mar 23, 2004, 1:02:11 PM3/23/04
to
Thanks!
"Ken N" <kensn@com(delete)cast.net> wrote in message
news:A0_7c.68665$SR1.120164@attbi_s04...

RicSeyler

unread,
Mar 26, 2004, 3:13:27 PM3/26/04
to
I'd sure stay away from anything marked "anti-fouling".
Some marine paints contain chemicals to kill barnacles, etc..

I just wouldn't want any around my tank. FWIW
-- 
Ric Seyler
Online Racing: RicSeyler
GPL Handicap 6.35
rics...@SPAMgulf.net
http://www.pcola.gulf.net/~ricseyler
remove –SPAM- from email address
--------------------------------------
"Homer no function beer well without."
- H.J. Simpson
0 new messages