Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
adding water
0 views
Skip to first unread message
Tom
May 26, 2004, 12:14:36 PM5/26/04
to
I always hear that when water evaporates, you just need to add
unsalted water, since the salt is still in the tank. I don't do this,
I always add salt, and my salinity is pretty constant. I do have lots
of salt up around my light and on the top edges of the tank. Why is
this?
unsalted water, since the salt is still in the tank. I don't do this,
I always add salt, and my salinity is pretty constant. I do have lots
of salt up around my light and on the top edges of the tank. Why is
this?
matthew jewell
May 26, 2004, 12:55:12 PM5/26/04
to
surprised your salinity stays constant,try differant hydrometer.you should
really only use ro or di water for your top ups,as to the "salt creep"
around your lights it could be you have a lot of surface movement causing
the water to splash up,try raising your lights to say 6-8inches from
surface.
hope this helps
"Tom" <x_str...@yahoo.com> wrote in message
news:f880d0d6.04052...@posting.google.com...
really only use ro or di water for your top ups,as to the "salt creep"
around your lights it could be you have a lot of surface movement causing
the water to splash up,try raising your lights to say 6-8inches from
surface.
hope this helps
"Tom" <x_str...@yahoo.com> wrote in message
news:f880d0d6.04052...@posting.google.com...
Prümmer
Jun 20, 2004, 11:04:36 AM6/20/04
to
Dear Tom
You should not add saltwater! Just plain water.
If you tell the size of your aquarium and how much water to add dayly I can
tell you how long it will take until the content of salt in your aquarium
doubles.
Rolf
"Tom" <x_str...@yahoo.com> schrieb im Newsbeitrag
news:f880d0d6.04052...@posting.google.com...
mike d.
Aug 25, 2008, 10:27:17 AM8/25/08
to
Personally, I believe that when the salinity is highly excessive, it builds
up on the exterior much more readily and with more mass. I usually just add
pure water, and then monitor the hydrometer readings to ensurew that i
maintain adequate salt levels. Mike.
up on the exterior much more readily and with more mass. I usually just add
pure water, and then monitor the hydrometer readings to ensurew that i
maintain adequate salt levels. Mike.
NoSpam
Aug 25, 2008, 3:00:57 PM8/25/08
to
"mike d." <mik...@nospamcomcast.net> wrote in message
news:x4WdnaURVNHVXC_V...@comcast.com...
> Personally, I believe that when the salinity is highly excessive, it
> builds up on the exterior much more readily and with more mass. I
> usually just add pure water, and then monitor the hydrometer
> readings to ensurew that i maintain adequate salt levels. Mike.
> "Tom" <x_str...@yahoo.com> wrote in message
> news:f880d0d6.04052...@posting.google.com...
>>I always hear that when water evaporates, you just need to add
>> unsalted water, since the salt is still in the tank.
This is true. Use RI/DO water or distilled.
> I don't do this,
>> I always add salt, and my salinity is pretty constant. I do have
>> lots
>> of salt up around my light and on the top edges of the tank. Why
>> is
>> this?
It's called 'salt creep'. And is giving you a false reading + it will
eventually kill your equiptment. Clean it all off with tap water. You
woun't like it when/if a chunk of it drops off into your tank.
Also clean your SG meter (the swing arm type) with vinegar to clean
it.
0 new messages