Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Partial List Going to Kutztown

0 views
Skip to first unread message

Peter Wieck

unread,
May 3, 2006, 11:28:34 AM5/3/06
to
The following items are going to Kutztown. I will not put prices here,
but if any particular item catches your eye, please let me know and we
*will* get to a fair price. None of this is fire-sale stuff (well,
some, and so-noted), but it is all duplicate and excess. Everything
works (properly) Unless Noted Otherwise:

Zenith 9S262 Shutterdial, 6U5 eye-tube, recapped (demonstrator at last
year's clinic so some of you will remember it), rebelted and working
nicely motors and all. DOES HAVE OEM "acoustic adaptor".

Zenith 6S254: Similar to, but not as nice as:

http://radioatticarchives.com/images/z/Zenith_6-S-254_ORZ.jpg

Incorrect tuning knob. Not-original-to-this-radio, but original wooden
Zenith-Slash perimeter knobs. Rebelted, replaced output transformer,
recapped, OEM speaker, plays nicely, excepting the wrong knob,
gorgeous.

Zenith 807 Tombstone: Recapped, working reasonably well (I did not
re-align), cabinet rough, OEM knobs in good condition, dial nice. I
replaced the top veneer piece with book-matched walnut, and prepped the
rest for re-coating. I may get this done before the 12th.

Philco 38-7: This will be one (of 2) Clinic Radios. It needs the
correct speaker, I am expecting one at Kutztown with a few tears which
I will also repair as part of the clinic. Incorrect but very nice
grille-cloth overlaid on OEM (intact) cloth. Nice cabinet. Condition
otherwise unknown but no sign of burn or damage, and represented as
'working' when received. Dial mechanism needs to be freed, but is
unbroken and uncracked.

AR Integrated Amplifier (70s-vintage, US-made): Works well, reasonable
cosmetics for its age. 50wpc/rms 2N3055 matched outputs. Tone-board and
driver-board caps replaced.

Dynaco SCA-80Q (Two Pieces): 40wpc/rms 2N3772 matched outputs,
TIP-31/32 matched drivers. This is the one with the built-in Hafler
Circuit. Both have rebuild amp-driver boards using screened and
over-rated components (which is no big deal, BTW).

Dynaco FM-3 tuner: Fair cosmetics, works nicely, good EMM-801 eye tube.


Revox A78 integrated amp: 50wpc/rms 2N3055 outputs. Works very nicely.
Note matching tuner below:
Revox A76 FM-only tuner: Wonky. Receives but not in stereo and does not
hold tune. DOES NEED SERVICE. One meter stuck. This will go with the
amp as a throw-in unless someone really-really-really wants only it.

Pair of AR3a speakers in excellent condition with paperwork. All
drivers work but the pots are (as usual) intermittent and need
cleaning. If they stay long enough, I will clean them while there as
one more clinic-demonstration.

Pair of AR4x speakers in excellent condition and with good pots.

Pair of ADS speakers, 5.5" woofers, dome tweeters, re-surrounded
woofers excellent condition.

Pair of AR8 speakers as above.

Possibles:

Dynaco ST416 power-amp: Conservative ratings at 125/16; 200/8 400/4
wpc/rms & stable to 2 ohms nominal load (much lower dynamic load).
Excellent condition, working well.

Dynaco SE10 Equalizer. Excellent condition.
Dynaco FM-5 Tuner. As above
Dynaco PAT-5bifet. As above

---OR---

Harmon Kardon Citation 16 power-amp. Similar ratings to the 416. I
really only need one such beast in the inventory....

AR X30 AM/FM 100wpc/rms receiver (Taiwan): Duplicate, works, receives
(but not in stereo), intermittent channel (loose connectors). CHEAP.
With functioning remote.

AR Receiver (70s US-made): (Triplicate) Fair condition, some minor
cosmetic issues, works well. These things go for obscene prices on
eBay.

Possible Scott LT-110 & LC-21: Excellent condition, no cages.

Various other bits and pieces.

Several freebies, first-come-first-served.

NOTES:

I will NOT SHIP ANY OF THIS UNTIL AFTER KUTZTOWN. So if you are unable
to attend that event, you may either send a proxy or express interest
now and then contact me afterwards if the item still remains unsold. My
preference is that any potential buyer kick the tires, test-drive,
verify condition, whatever so that there are no disappointments or
disagreements.

This is NOT an auction. Any price discussed based on this post will be
firm until the item is inspected by the interested party, even if
on-site higher offers are made. No offerer will be held to the
agreement if they decide on-site that the item is not what they
expected, and no arguments will be made by me to the contrary no matter
what the reason for not completing the transaction. However, once the
transaction is made, it is *FINAL*.

I have set an arbitrary time by which all deals must be either
completed or cancelled of 9:00am, Saturday, May 13, 2006; to allow
reasonable time for casual attendees to purchase. None of the
top-listed items will go into the auction. Period. Some of the
possibles *may* go into the auction. Those delayed or otherwise impeded
may be able to call me on my cell-phone at the time, but if that is the
case, the deal goes "hard" at that point. I DO want to avoid blind
sales however. My cell-phone number will go only to interested parties
and at my sole-and-only discretion.

No, I will not send pictures now... one more reason to get to Kutztown.
If I were to go to that trouble, I may as well flog the lot on eBay for
at least a multiple or two of what I actually expect to realize at
Kutztown.

Peter Wieck
Wyncote, PA

p f j w (at) a o l (dot) c o m

e-mail contact. Make the appropriate adaptations.

0 new messages