RE: [RDRC] Spektrum DX7 Ball Bearing Upgrade for Gimbals

[wb4...@teara.org]

>GWS EPSC-2A4C (4x7x2mm).
>Boca has a few 4x7x2 bearings and buying in a ten pack and repackaging may
be a good option:
>http://www.bocabearings.com/main1.aspx?p=quicksearchbearing
>Jeff

Thanks Jeff,

We buy bearings from a few different sources, I'll look into this.

Dave

[wb4...@teara.org]

At 09:32 AM 1/3/2010 -0500, you wrote:
>
>You're correct Bill. However, even with the smooth tension strap and
grease, the throttle was a bit notchy. So, I sanded the indentations from
the plastic on the throttle slider itself. Starting with 150 and ending
with 320+. The process makes the throttle buttery smooth. Note that you
can still use the tension strap, but it will not have the ability to ratchet
any longer.
>Jeff

Yep, I've heard of other heli pilots doing the same thing to get a "smooth"
feel to their throttle. MAN, it's only 24 deg as of 10am, and the chill
factor is down at 9!! Brrrrr! I guess the building season is finally here,
hehehehehe...

Dave

[Jim Charbonneau]

Guys
Took and wood burning patio heater to the field, anyone that wants to stay
warm bring some fire wood out and have at it. The bail of straw there can be
used to start your kindling.

Jim
jcharb...@nc.rr.com

Dave

--
To post to this group, send email to RD...@googlegroups.com
To unsubscribe from this group, send email to
RDRC-uns...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/RDRC
Visit our website at http://www.rd-rc.org
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.725 / Virus Database: 270.14.124/2598 - Release Date: 01/03/10
04:41:00