The Supply Source French Dip System

[Max Pain]

*****************************************************************

Message delivered directly to members of the group:
publish-the...@googlegroups.com

*****************************************************************

Please consider this free-reprint article written by:
Max Pain

*****************************
IMPORTANT - Publication/Reprint Terms

- You have permission to publish this article electronically in free-only publications such as a website or an ezine as long as the bylines are included.

- You are not allowed to use this article for commercial purposes. The article should only be reprinted in a publicly accessible website and not in a members-only commercial site.

- You are not allowed to post/reprint this article in any sites/publications that contains or supports hate, violence, porn and warez or any indecent and illegal sites/publications.

- You are not allowed to use this article in UCE (Unsolicited Commercial Email) or SPAM. This article MUST be distributed in an opt-in email list only.

- If you distribute this article in an ezine or newsletter, we ask that you send a copy of the newsletter or ezine that contains the article to http://www.isnare.com/eta.php?aid=140955

- If you post this article in a website/forum/blog, ALL links MUST be set to hyperlinks and we ask that you send a copy of the URL where the article is posted to http://www.isnare.com/eta.php?aid=140955

- We request that you ask permission from the author if you want to publish this article in print.

The role of iSnare.com is only to distribute this article as part of its Article Distribution feature ( http://www.isnare.com/distribution.php ). iSnare.com does NOT own this article, please respect the author's copyright and this publication/reprint terms. If you do not agree to any of these terms, please do not reprint or publish this article.
*****************************

Article Title: The Supply Source French Dip System
Author: Max Pain
Word Count: 590
Article URL: http://www.isnare.com/?aid=140955&ca=Womens+Interest
Format: 64cpl
Contact The Author: http://www.isnare.com/eta.php?aid=140955

Easy Publish Tool: http://www.isnare.com/html.php?aid=140955

*********************** ARTICLE START ***********************
You can provide a fantastic sleek look to your nail tips as well as your natural nails with The Supply Source French Dip System.

The first step is to prepare your nails. Size your nail tips. Keep a little margin while sizing. Now lay the nails in the order in which you will be applying the system.

The next step is to use Supply Source Brush on Resin and base the nails. You should cover the entire nail but leave 1/16' to 1/18' space from cuticles and sidewalls. Keep the tip on the nail and hold it till it dries. You can also go for Supply Source Activator to create a quick perfect adhesion.

Now turn the tip of one of the nail and cautiously put the Supply Source Resin on the inner smile line. Now place it on our natural nail and hold it for about ten seconds so that it firmly grips your nail. Repeat the procedure for the rest three fingers of your hand followed by the two thumbs and then for the four fingers of your other hand.

The next step is to cut the tips and measure the nail length. Give your nail the final shape and remove the shine from the tips using a 180/180 grit cushion board file. Be careful not to touch the smile line. Use a clean dry nylon nail brush to remove the dust. If you have chosen to use glue activator earlier then you will have to base all the nails from cuticle to tip using Supply Source Brush On Resin.

Now apply Supply Source Brush On Resin on the nail plate area one by one on the nails without letting it to flow into the sidewalls or the cuticle area. Repeat the step till you have built up plate to meet the smile line area of the tip.

Now overlay the entire nails one by one with a coat of Supply Source Resin

Now put another coat of Supply Source Resin one by one on all nails. Keep your nails one by one in such a way that they face downwards. Take good amount of French Dip powder and dust it over the wet nails one by one. Let the excess powder fall onto your table towel. To remove excess powder, tap the side of your finger. Repeat the step till you get a strong nail with good arch.

Now spray with Supply Source Activator , after applying a coating of Supply Source Resin on the entire nail one by one and let your nails dry.

Using a file or an electric file, give your nail tips and sides the perfect shape. The surface and the edges are to be refined using a buffer. Now clean the nails with a nylon brush .

Now you can apply the Finito Capping Gel sealant to give your nails a high shine. I reccommend a 36 watt lamp to cure Finito Gel for a period of 1 minute. After the curing of gel, application of cuticle oil is recommended.

If you are a nail tech or beauty professional, compare their prices with the other suppliers. Their guarantee, The Supply Source will match any advertised price" offered by any competitor. Request a full-color nail supply catalog or view it in a PDF format of over 16,000 new products. Feel free to call them today with any your questions, comments and ideas 800-221-8477 or 954-742-9553


About The Author: Mark Flitzer writes articles for Nail Tech Wholesale Supply Companies such as http://Idonails.com. Visit them at http://www.idonails.com or http://idonails.com/

Please use the HTML version of this article at:
http://www.isnare.com/html.php?aid=140955
*********************** ARTICLE END ***********************

- To distribute your articles go to http://www.isnare.com/distribution.php
- For more free-reprint articles go to http://www.isnare.com