Subject: Captive portal supporting multiple Subnets, Vlans
Date: Sat, 30 Jan 2010 13:26:29 +0100
Message-ID: <9A839A27DC208D4C821A...@asgrz12.bit.local>
From: "Steinbäcker, Markus" <Markus.St...@bitonline.cc>
To: <in...@personaltelco.net>
Hi,
I found your website is one of the most informative on the web, in the
field of Captive Portals. So I kindly ask you for some conceptional
information about the scenario described below.
I ran into a scenario, where an existing network infrastructure
(L3-Switches, Accesspoints, Routers) should provide guest access,
using a captive portal.
I am familiar, with captive portals running on geographically
distributed accesspoints (eg. restaurant chains) , using a central
loginpage and radius. In all that cases the Captive portal runs on the
local subnet, serving as Router and DHCP. Is this a requirement, or
can a captive gatway also be placed behind one ore more routers?
In my scenario I would needs a "central" captive portal (Gateway), to
which I can route all the Internet traffic from one site. Ideally the
Gateway can restrict users based on VLAN-ids, Subnet-ids or SS-ids.
e.g Users belonging to a radius group called "guests" are only granted
access, if they are connected to specific SSIds, VLAn-Ids or subnets.
Would be even nicer, if there could exist multiple login pages based
on these IDs .
Is there anything on the market, which would serve my needs?
P.S.: My basic idea was to run multiple instances of a captive portal
(in my case coova-chilli) on a single server. Then use iptables (or
anything like that) to forward the client connections based on IP,
VLAN,SSid to the appropriate instance. Could this work?
Thank you for answering.
Markus Steinbäcker
bit schulungscenter Nfg GmbH & Co KG | Kaerntner Strasse 311, 8054
Graz | FN 264297 y | ATU61831566 | Gerichtsstand Graz
bit management Beratung GesmbH | Kaerntner Strasse 311, 8054 Graz | FN
147857m | ATU58011225 | Gerichtsstand Graz
bit media e-learning solution GmbH & Co KG | Kaerntner Strasse 311,
8054 Graz | FN 195426d | ATU49978207 | Gerichtsstand Wien
Unternehmensberatung bit consulting GmbH | Kaerntner Strasse 311, 8054
Graz | FN 196369d | ATU49853109 | Gerichtsstand Graz
--
Russell Senior, President
rus...@personaltelco.net
A traditional captive portal could work, but would not be completely
effective in this scenario. This is because most captive portals (that
I've used) expect to act as the L3 gateway to a flat L2 network. I
think that most tools will want to use a combination of source IP
address and MAC address, and might get confused by an intermediary router.
If I wanted to get this 100% right I would use something like
Smoothwall, configured as a transparent proxy with a redirected SSL
login page. You can then allow unauthenticated access exceptions on a
per-VLAN-interface or subnet basis.
Smoothwall is Linux-based. I know from experience that the commercial
variant (http://www.smoothwall.net/ , not very expensive) will handle
this with flying colors. Pretty sure the free OSS variant will as well
(http://www.smoothwall.org/ ).
Also, because I can't resist to ask: If you are putting guests on your
(assuming) corporate network, why is controlling Internet access your
primary concern?
-Irving
On 2/2/10 2:21 PM, Russell Senior wrote:
> Any thoughts on this?
>
> Subject: Captive portal supporting multiple Subnets, Vlans
> Date: Sat, 30 Jan 2010 13:26:29 +0100
> Message-ID:<9A839A27DC208D4C821A...@asgrz12.bit.local>
> From: "Steinb�cker, Markus"<Markus.St...@bitonline.cc>
> Markus Steinb�cker
>
>
> bit schulungscenter Nfg GmbH& Co KG | Kaerntner Strasse 311, 8054
> Graz | FN 264297 y | ATU61831566 | Gerichtsstand Graz
>
> bit management Beratung GesmbH | Kaerntner Strasse 311, 8054 Graz | FN
> 147857m | ATU58011225 | Gerichtsstand Graz
>
> bit media e-learning solution GmbH& Co KG | Kaerntner Strasse 311,
Markus,
A traditional captive portal could work, but would not be completely
effective in this scenario. This is because most captive portals (that
I've used) expect to act as the L3 gateway to a flat L2 network. I
think that most tools will want to use a combination of source IP
address and MAC address, and might get confused by an intermediary router.
If I wanted to get this 100% right I would use something like
Smoothwall, configured as a transparent proxy with a redirected SSL
login page. You can then allow unauthenticated access exceptions on a
per-VLAN-interface or subnet basis.
Smoothwall is Linux-based. I know from experience that the commercial
variant (http://www.smoothwall.net/ , not very expensive) will handle
this with flying colors. Pretty sure the free OSS variant will as well
(http://www.smoothwall.org/ ).
Also, because I can't resist to ask: If you are putting guests on your
(assuming) corporate network, why is controlling Internet access your
primary concern?
-Irving
On 2/2/10 2:21 PM, Russell Senior wrote:
> Any thoughts on this?
>
> Subject: Captive portal supporting multiple Subnets, Vlans
> Date: Sat, 30 Jan 2010 13:26:29 +0100
> Message-ID:<9A839A27DC208D4C821A...@asgrz12.bit.local>
> From: "Steinbäcker, Markus"<Markus.St...@bitonline.cc>
> Markus Steinbäcker
>
>
> bit schulungscenter Nfg GmbH& Co KG | Kaerntner Strasse 311, 8054
> Graz | FN 264297 y | ATU61831566 | Gerichtsstand Graz
>
> bit management Beratung GesmbH | Kaerntner Strasse 311, 8054 Graz | FN
> 147857m | ATU58011225 | Gerichtsstand Graz
>
> bit media e-learning solution GmbH& Co KG | Kaerntner Strasse 311,
> 8054 Graz | FN 195426d | ATU49978207 | Gerichtsstand Wien
>
> Unternehmensberatung bit consulting GmbH | Kaerntner Strasse 311, 8054
> Graz | FN 196369d | ATU49853109 | Gerichtsstand Graz
>
>
>
>