pico-SAM9G45 Mini-Box.com ARM embedded system board

Welcome! On this group you can post problems or successes you encounter regarding your development on

> MiniPCI-E with Sim slot Note that the pci-e slot only has USB signals (which is enough for most

I've tested my dongles with the 2.3 build and most of them work well, albeit slowly. One of the

Dear leonid, We have discarded this board and changed to a better hardware. So I do not have no

The pico-sam will not power another device or get power for itself over ethernet, it just not

Following the advices mentioned by Nicu, I put these config settings: CONFIG_USB_OTG=n USB_GADGET=n

No that is not possible using gpio. The components for USB ena are replaced by 0 ohm resistors. You

Giorgio read and this. Maybe is one of this problem (whatchdog or bootstratp version). -----Original

I found the answer to my question #2. For reference, I just needed to add the line: hwaddress ether

Great, thanks! After all the time I've spent looking over the wiki, I don't know how I missed

Hi, I want to use TXD1 and RXD1 as GPIO pins. Is this possible without bounding/unbounding in kernel

How to receive data from serial to USB converter at USB port in android Gingerbread OS? I have

I've been able to get the SDRAM initialized correctly. (Once that was behind me, I was able to

Hi, I have several pico-SAM9G45s and an Atmel AT91SAM9G45-EKES (evaluation/development card). Most

I have rooted sam 9G45 board. I have used SuperOneClick v2.3.3 - ShortFuse software. Download and run

Have the 4.3 LCD Angstrom, USB Mouse or keyboard don't work at all and the onscreen is not

Actually I found that the Angstrom images with kernel 2.6.32.9 weren't working (no dbgu and usb

Can anybody please tell me the following :- 1) How to install android apk file in Pico-SAM9G45

I have the latest 3.4 stable kernel and 3.11 running on the pico now. 3.11 has issues with the MMC (

I don't understand why a company who wants to sell a product is so un-forthcoming on part numbers

Do you know if any 3g module could work? (like this, for example: http://www.ebay.com/itm/HuaWei-

if u have a image of any android os working on picosam9g45 with 7inch screen please share with me On

Looks like the latest master branch from angstrom setup-scripts won't work with our recipes.

Hi, You could also used a USB mouse GPS like the BU-353. I have tried it and it works well. Le mardi

Hi folks, So far we use J7 (pins 11&13). Now we need to connect second device for communication (

Hi Guys, Have you try to use usb-rs232 adapter attached. Something specific? I have already edited

subj

I'm trying to use the serial ports. Angstrom with GUI is installed. Is there something I should

The rtcwken is not enabled in the Nicu Pavel kernel to fix this apply the following patch: diff --git

Hello everyone, Any news on the development? Just curious where you guys stand... Thank you, Nikolay

I found this distribution for picosam. http://uelastix.org/ Maybe is necessary for someone.