Re: [pandaboard] Problem with start Android on Pandaboard ES, pls Help!

[dmitry pervushin]

Hello,

Have you considered using more recent release?
http://omappedia.org/wiki/4AI.1.7_OMAP4_Icecream_Sandwich_Release_Notes

On 09/21/2012 11:11 AM, scherb...@gmail.com wrote:
> Anybody please help me, I used this manual
> http://omappedia.org/wiki/4AI.1.4_OMAP4 ... anda_Notes
> <http://omappedia.org/wiki/4AI.1.4_OMAP4_Icecream_Sandwich_Panda_Notes>
> for building my android system and I finished this. But, when I input
> sdcard in pandaboard es, I have this error:
[....]

[Israel Cepeda]

Are you getting that log when using the binaries you built?
What if you use the prebuild binaries?, is it working?

On Fri, Sep 21, 2012 at 6:07 AM, <scherb...@gmail.com> wrote:

пятница, 21 сентября 2012 г., 13:21:12 UTC+3 пользователь dmitry pervushin написал:

This is not so good idea,first,I used pandaboard es,second,my problem in that ,I mean, "omap_vp_get_curr_volt: PMIC function to convert vsel to voltagein

uV not registerd" and   "voltdm_scale: No voltage scale API registered for vdd_mpu ".

[dmitry pervushin]

On 09/25/2012 12:27 PM, scherb...@gmail.com wrote:
> Are you getting that log when using the binaries you built?
> What if you use the prebuild binaries?, is it working?
>

> Yes, why I should use prebuild, if i have build binaries?
That's simple - because prebuilt binaries are tested. I am trying to
reproduce your problem, but I failed to...

--
Sincerely yours,
dmitry pervushin

[dmitry pervushin]

Hello,

here
(https://gforge.ti.com/gf/project/panda_binaries/frs/?action=FrsReleaseBrowse&frs_package_id=293)
are binaries for pandaboard. Could you please spend some time to flash
them on SD card, then confirm whether these works/does not work.

(if these binaries won't work on your board, I'd ask you to download and
run validation image, to check if your board is not broken)

Thanks!

On 09/26/2012 10:01 AM, scherb...@gmail.com wrote:
>
>
> вторник, 25 сентября 2012 г., 16:23:54 UTC+3 пользователь dmitry
> pervushin написал:

>
> On 09/25/2012 12:27 PM, scherb...@gmail.com <javascript:> wrote:
> > Are you getting that log when using the binaries you built?
> > What if you use the prebuild binaries?, is it working?
> >
> > Yes, why I should use prebuild, if i have build binaries?
> That's simple - because prebuilt binaries are tested. I am trying to
> reproduce your problem, but I failed to...
>
> --
> Sincerely yours,
> dmitry pervushin
>
>
>

> Stop, I compiled the kernel and other I needed files, format the memory
> card using fastboot recorded it all on the card. And received an error.
> I I had no prebuild files.

[dmitry pervushin]

Hello,

Calm down :) I understand your reasons, but:
1. have you followed exactly the steps to build the kernel?
a) apply the correct patches (please refer to the section Patching
KERNEL)
b) use the correct toolchain (arm-2010q1, available from
CodeSourcery, errr, MentorGraphics web site -- say, here ->
http://www.codesourcery.com/sgpp/lite/arm/portal/release324)
c) use the default .config file, if you have made any changes to it
(please find it attached)

2. if your system boots up to the login prompt, but you do not see nice
picture on the display, it seems reasonable to provide the output of
"logcat". Before reporting that "nothing works", make sure that you
compiled and installed the SGX drivers as referred in the release notes.

3. And finally, if nothing else helps and even if you absolutely sure
that you built all things correctly, try to use prebuilt images. If even
them fail... probably, both your boards are broken. But I just finished
rebuild this release, and verified it on all pandas that I have.

I am very sorry if I could not help you immediately.

I also hope that my english is understandable.

On 09/26/2012 01:57 PM, scherb...@gmail.com wrote:
>
>
> среда, 26 сентября 2012 г., 13:42:26 UTC+3 пользователь dmitry pervushin
> написал:
>
> Hello,
>
> here
> (https://gforge.ti.com/gf/project/panda_binaries/frs/?action=FrsReleaseBrowse&frs_package_id=293
> <https://gforge.ti.com/gf/project/panda_binaries/frs/?action=FrsReleaseBrowse&frs_package_id=293>)

>
> are binaries for pandaboard. Could you please spend some time to flash
> them on SD card, then confirm whether these works/does not work.
>
> (if these binaries won't work on your board, I'd ask you to download
> and
> run validation image, to check if your board is not broken)
>
> Thanks!
>
>

> This is a complete system, I needed a custom system.I will be add my
> application in this system. conclusion - I can't use completed system.
> I tested my system on the other pandaboard and HyperTerminal gives me
> the same thing.A Pandaboard all is normal.
> На русском: Мне нужна кастомная система, в неё мы будем зашивать свои
> приложения.Тестил 2ю борду с ней тож самое.