Pardon for the delayed reply. I have 2 identical pandaboards, both
installed with ARM-OMAP Ubuntu 12.04. Each of the boards have their
separate monitors. Boards are not connected which each other. They use same
monitors, 8g SD cards, cables ( DVID) all identical and was running same
programs on both boards. One pandaboard apparently stop showing the display
over its monitor. I swapped the cards, cables, monitors but it does not
show any display on the monitor. The other board was working fine.
I cannot send you output for dmesg +lsmod as there is no display. I ll
check if there is a workaround.
Now my current problem is, the one board that was working, fear is fired.
On this board I had installed Codezero hyper visor (bare metal/ removing
the earlier Ubuntu) and two android OS 4.05, one over each core. It ran
successfully once and now its not able to . Infact the LED D2 just blinks
once and there is no display even. The POP memory/OMAPprocessor chip on
board becomes hot than usual.
So one board has a display problem and other board just does not do
anything ( even after trying to boot the earlier Ubuntu over it).