OpenQM Tip of the week: Public and Private Servers

[martinp...@ladybridge.com]

A new Tip of the Week article is now available at
http://www.openqm.com/cgi/lbscgi.exe?t0=h&t1=KB.00078

[Mike]

As always, I enjoy these tips - but this time I am a tad lost....

Do I SET.PRIVATE.SERVER on both the client and the server or - which one?

 And the 'addr' - is that the address of the server or the address of the client?

Mike

On Thursday, May 31, 2012 8:27:20 AM UTC+1, Martin Phillips wrote:

A new Tip of the Week article is now available at
http://www.openqm.com/cgi/lbscgi.exe?t0=h&t1=KB.00078

[CDMI - Steve T]

SET.PRIVATE.SERVER PHONE.HOME 101.228.1.19 administrator phonein

the above example command is executed on the 'remote/local' desktop

'PHONE.HOME' is a name for the server

101.228.1.19 is a valid IP to connect to the 'mother' QM system

administrator is the login

phonein is the password

once the above is executed, you can:

QMSERVER = PHONE.HOME ; ACCTNAME = "QMSYS" ; FLNAME = "TEMP"

FNAME = QMSERVER:":":ACCTNAME:":":FLNAME

OPEN FNAME TO HOST.FL ELSE....

remember the above example is 'happening' on the remote/local desktop that is wanting to phone home

works so well, it's almost erie

good luck!
 

Steve Trimble

Computerized Data Mgmt Inc
PO Box 13403
Maumelle, AR 72113
(501) 803-0974 09:00am - 6:00pm CST

---

From: Mike <mg.r...@gmail.com>
To: ope...@googlegroups.com
Cc: mvd...@googlegroups.com
Sent: Thu, May 31, 2012 7:30:06 AM
Subject: Re: OpenQM Tip of the week: Public and Private Servers