A new "unstable" release was uploaded into the www.openni.org site. (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
*** The main feature of the release is the removal of the calibration pose! *** Please check out the new NiUserSelection sample that shows different mechanisms of how to pick the active users.
A complete list of changes will be posted tomorrow and the sources on GitHub will be updated later as well.
Please don't forget that this is a beta/unstable release so we'll love as much feedback as possible!
On Sun, Nov 20, 2011 at 12:47 PM, Ziv Hendel <z...@openni.org> wrote: > Hi All,
> A new "unstable" release was uploaded into the www.openni.org site. > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> *** The main feature of the release is the removal of the calibration > pose! *** > Please check out the new NiUserSelection sample that shows different > mechanisms of how to pick the active users.
> A complete list of changes will be posted tomorrow and the sources on > GitHub will be updated later as well.
> Please don't forget that this is a beta/unstable release so we'll love > as much feedback as possible!
> Thanks, > Ziv.
> -- > You received this message because you are subscribed to the Google Groups > "OpenNI" group. > To post to this group, send email to openni-dev@googlegroups.com. > To unsubscribe from this group, send email to > openni-dev+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/openni-dev?hl=en.
On Sun, Nov 20, 2011 at 4:49 PM, Siddharth P <siddharth.c...@gmail.com> wrote: > Excellent news!!
> On Sun, Nov 20, 2011 at 12:47 PM, Ziv Hendel <z...@openni.org> wrote:
>> Hi All,
>> A new "unstable" release was uploaded into the www.openni.org site. >> (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
>> *** The main feature of the release is the removal of the calibration >> pose! *** >> Please check out the new NiUserSelection sample that shows different >> mechanisms of how to pick the active users.
>> A complete list of changes will be posted tomorrow and the sources on >> GitHub will be updated later as well.
>> Please don't forget that this is a beta/unstable release so we'll love >> as much feedback as possible!
>> Thanks, >> Ziv.
>> -- >> You received this message because you are subscribed to the Google Groups >> "OpenNI" group. >> To post to this group, send email to openni-dev@googlegroups.com. >> To unsubscribe from this group, send email to >> openni-dev+unsubscribe@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/openni-dev?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "OpenNI" group. > To post to this group, send email to openni-dev@googlegroups.com. > To unsubscribe from this group, send email to > openni-dev+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/openni-dev?hl=en.
I have installed all three new releases, but cannot get the NiSimpleViewer.exe running. It says; Open failed: The environment variable could not be found! There are $(OPEN_NI_INCLUDE), $(OPEN_NI_INSTALL_PATH), and $(OPEN_NI_LIB) in my environment variables. What is the problem?
> A new "unstable" release was uploaded into thewww.openni.orgsite. > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> *** The main feature of the release is the removal of the calibration > pose! *** > Please check out the new NiUserSelection sample that shows different > mechanisms of how to pick the active users.
> A complete list of changes will be posted tomorrow and the sources on > GitHub will be updated later as well.
> Please don't forget that this is a beta/unstable release so we'll love > as much feedback as possible!
Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late 2011). But I got error, "Segmentation fault:11" when I execute sample applications, for example, "Sample-NiSimpleViewer", "Sample- NiSimpleSkeleton".
Please help.
On 11月21日, 午前3:47, Ziv Hendel <z...@openni.org> wrote:
> A new "unstable" release was uploaded into thewww.openni.orgsite. > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> *** The main feature of the release is the removal of the calibration > pose! *** > Please check out the new NiUserSelection sample that shows different > mechanisms of how to pick the active users.
> A complete list of changes will be posted tomorrow and the sources on > GitHub will be updated later as well.
> Please don't forget that this is a beta/unstable release so we'll love > as much feedback as possible!
I can't use OpenNI-1.3.4.6 + Nite-1.5.0.1 + SensorKinect-5.0.3.4 with kinect.
C:\Program Files\PrimeSense\NITE\Samples\Bin\Release>Sample- PointViewer.exe 1240 INFO OpenNI version is 1.4.0 (Build 2)-Win32 (Nov 17 2011 18:51: 00) 1480 INFO --- Filter Info --- Minimum Severity: UNKNOWN
On 11月21日, 上午2时47分, Ziv Hendel <z...@openni.org> wrote:
> A new "unstable" release was uploaded into thewww.openni.orgsite. > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> *** The main feature of the release is the removal of the calibration > pose! *** > Please check out the new NiUserSelection sample that shows different > mechanisms of how to pick the active users.
> A complete list of changes will be posted tomorrow and the sources on > GitHub will be updated later as well.
> Please don't forget that this is a beta/unstable release so we'll love > as much feedback as possible!
Can you please run it from gdb so we can get a stack-trace and find the cause? To do so please do: gdb ./Sample-NiSimpleViewer then type "run" to start the program and after it crashes type "backtrace" and post the output here. Thanks, Ziv.
On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late 2011). > But I got error, "Segmentation fault:11" when I execute sample > applications, for example, "Sample-NiSimpleViewer", "Sample- > NiSimpleSkeleton".
> Please help.
> On 11月21日, 午前3:47, Ziv Hendel <z...@openni.org> wrote:
> > Hi All,
> > A new "unstable" release was uploaded into thewww.openni.orgsite. > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > *** The main feature of the release is the removal of the calibration > > pose! *** > > Please check out the new NiUserSelection sample that shows different > > mechanisms of how to pick the active users.
> > A complete list of changes will be posted tomorrow and the sources on > > GitHub will be updated later as well.
> > Please don't forget that this is a beta/unstable release so we'll love > > as much feedback as possible!
> I have installed all three new releases, but cannot get the > NiSimpleViewer.exe running. > It says; > Open failed: The environment variable could not be found! > There are $(OPEN_NI_INCLUDE), $(OPEN_NI_INSTALL_PATH), and $(OPEN_NI_LIB) > in my environment variables. > What is the problem?
On Monday, November 21, 2011 5:53:09 AM UTC+2, flymanbox wrote:
> I can't use OpenNI-1.3.4.6 + Nite-1.5.0.1 + SensorKinect-5.0.3.4 with
> kinect.
> C:\Program Files\PrimeSense\NITE\Samples\Bin\Release>Sample-
> PointViewer.exe
> 1240 INFO OpenNI version is 1.4.0 (Build 2)-Win32 (Nov 17
> 2011 18:51:
> 00)
> 1480 INFO --- Filter Info --- Minimum Severity: UNKNOWN
> On 11月21日, 上午2时47分, Ziv Hendel <z....@openni.org> wrote:
> > Hi All,
> > A new "unstable" release was uploaded into thewww.openni.orgsite.
> > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > *** The main feature of the release is the removal of the calibration
> > pose! ***
> > Please check out the new NiUserSelection sample that shows different
> > mechanisms of how to pick the active users.
> > A complete list of changes will be posted tomorrow and the sources on
> > GitHub will be updated later as well.
> > Please don't forget that this is a beta/unstable release so we'll love
> > as much feedback as possible!
> Can you please try the "NiViewer" or "NiUserTracker" samples from OpenNI > and see what happens?
> Thanks,
> Ziv.
> On Monday, November 21, 2011 5:53:09 AM UTC+2, flymanbox wrote:
> > I can't use OpenNI-1.3.4.6 + Nite-1.5.0.1 + SensorKinect-5.0.3.4 with > > kinect.
> > C:\Program Files\PrimeSense\NITE\Samples\Bin\Release>Sample- > > PointViewer.exe > > 1240 INFO OpenNI version is 1.4.0 (Build 2)-Win32 (Nov 17 > > 2011 18:51: > > 00) > > 1480 INFO --- Filter Info --- Minimum Severity: UNKNOWN
> > On 11月21日, 上午2时47分, Ziv Hendel <z....@openni.org> wrote: > > > Hi All,
> > > A new "unstable" release was uploaded into thewww.openni.orgsite. > > > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > *** The main feature of the release is the removal of the calibration > > > pose! *** > > > Please check out the new NiUserSelection sample that shows different > > > mechanisms of how to pick the active users.
> > > A complete list of changes will be posted tomorrow and the sources on > > > GitHub will be updated later as well.
> > > Please don't forget that this is a beta/unstable release so we'll love > > > as much feedback as possible!
Hi i'am a newbie to all this, i downloaded the latest versions , and i have the same errors as stated above, and I can't seem to have anything working yet. can you please post download links for older versions for OpenNI,NITE and Kinect driver.
On Nov 21, 8:31 am, Ziv Hendel <z...@openni.org> wrote:
> Can you please try the "NiViewer" or "NiUserTracker" samples from OpenNI > and see what happens?
> Thanks,
> Ziv.
> On Monday, November 21, 2011 5:53:09 AM UTC+2, flymanbox wrote:
> > I can't use OpenNI-1.3.4.6 + Nite-1.5.0.1 + SensorKinect-5.0.3.4 with > > kinect.
> > C:\Program Files\PrimeSense\NITE\Samples\Bin\Release>Sample- > > PointViewer.exe > > 1240 INFO OpenNI version is 1.4.0 (Build 2)-Win32 (Nov 17 > > 2011 18:51: > > 00) > > 1480 INFO --- Filter Info --- Minimum Severity: UNKNOWN
> > On 11月21日, 上午2时47分, Ziv Hendel <z....@openni.org> wrote: > > > Hi All,
> > > A new "unstable" release was uploaded into thewww.openni.orgsite. > > > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > *** The main feature of the release is the removal of the calibration > > > pose! *** > > > Please check out the new NiUserSelection sample that shows different > > > mechanisms of how to pick the active users.
> > > A complete list of changes will be posted tomorrow and the sources on > > > GitHub will be updated later as well.
> > > Please don't forget that this is a beta/unstable release so we'll love > > > as much feedback as possible!
#0 0x0000000100418528 in XnDeviceModule::DoesPropertyExist () #1 0x00000001004268ea in XnShiftToDepthStreamHelper::Init () #2 0x000000010040c510 in XnDepthStream::Init () #3 0x0000000100324f48 in XnSensorDepthStream::Init () #4 0x000000010041a320 in XnDeviceModuleHolder::Init () #5 0x0000000100412437 in XnDeviceBase::CreateStreamImpl () #6 0x0000000100315742 in XnSensor::CreateStreamImpl () #7 0x000000010040e1c9 in XnDeviceBase::CreateStream () #8 0x000000010030aa73 in XnExportedSensorGenerator::Create () #9 0x000000010033e54e in XnExportedSensorDepthGeneratorCreate () #10 0x00000001000e307d in XnModuleLoader::CreateRootNode () #11 0x0000000100100def in xnCreateProductionTreeImpl () #12 0x0000000100116036 in xnConfigureCreateNodes () #13 0x00000001000da7af in __ModuleScriptRun () #14 0x00000001000ff190 in xnScriptNodeRun () #15 0x0000000100101f7e in xnContextRunXmlScriptFromFileEx () #16 0x0000000100103bd1 in xnInitFromXmlFileEx () #17 0x00000001000019ed in main ()
And, this is the result message after typing "run"
(gdb) run Starting program: /Users/mitsuru/Documents/OpenNI/openni_1_4_0_2/ OpenNI-Bin-Dev-MacOSX-v1.4.0.2/Samples/Bin/x86-Release/Sample- NiSimpleViewer Reading symbols for shared libraries ++++ +.......................................................................... ...................................................................... done Reading symbols for shared libraries . done Reading symbols for shared libraries .... done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done
Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: KERN_INVALID_ADDRESS at address: 0x00000000000000d8 0x0000000100418528 in XnDeviceModule::DoesPropertyExist ()
If you need more information, please tell me.
On 11月21日, 午後3:16, Ziv Hendel <z...@openni.org> wrote:
> Can you please run it from gdb so we can get a stack-trace and find > the cause? > To do so please do: > gdb ./Sample-NiSimpleViewer > then type "run" to start the program and after it crashes type > "backtrace" and post the output here. > Thanks, > Ziv.
> On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> > Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late 2011). > > But I got error, "Segmentation fault:11" when I execute sample > > applications, for example, "Sample-NiSimpleViewer", "Sample- > > NiSimpleSkeleton".
> > Please help.
> > On 11月21日, 午前3:47, Ziv Hendel <z...@openni.org> wrote:
> > > Hi All,
> > > A new "unstable" release was uploaded into thewww.openni.orgsite. > > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > *** The main feature of the release is the removal of the calibration > > > pose! *** > > > Please check out the new NiUserSelection sample that shows different > > > mechanisms of how to pick the active users.
> > > A complete list of changes will be posted tomorrow and the sources on > > > GitHub will be updated later as well.
> > > Please don't forget that this is a beta/unstable release so we'll love > > > as much feedback as possible!
With the new OpenNI1.4.0.2 and Nite1.5.0.1 ,SimpleViewer is working but Usertracker Not! I removed New Nite and installed previous version ( Nite1.4.1.2) with OpenNI1.5.0.1 and it works great. I think there is something wrong with new version of Nite.
On Mon, Nov 21, 2011 at 11:59 AM, mmlemon <mitsuru.takeu...@gmail.com>wrote:
> #0 0x0000000100418528 in XnDeviceModule::DoesPropertyExist () > #1 0x00000001004268ea in XnShiftToDepthStreamHelper::Init () > #2 0x000000010040c510 in XnDepthStream::Init () > #3 0x0000000100324f48 in XnSensorDepthStream::Init () > #4 0x000000010041a320 in XnDeviceModuleHolder::Init () > #5 0x0000000100412437 in XnDeviceBase::CreateStreamImpl () > #6 0x0000000100315742 in XnSensor::CreateStreamImpl () > #7 0x000000010040e1c9 in XnDeviceBase::CreateStream () > #8 0x000000010030aa73 in XnExportedSensorGenerator::Create () > #9 0x000000010033e54e in XnExportedSensorDepthGeneratorCreate () > #10 0x00000001000e307d in XnModuleLoader::CreateRootNode () > #11 0x0000000100100def in xnCreateProductionTreeImpl () > #12 0x0000000100116036 in xnConfigureCreateNodes () > #13 0x00000001000da7af in __ModuleScriptRun () > #14 0x00000001000ff190 in xnScriptNodeRun () > #15 0x0000000100101f7e in xnContextRunXmlScriptFromFileEx () > #16 0x0000000100103bd1 in xnInitFromXmlFileEx () > #17 0x00000001000019ed in main ()
> And, this is the result message after typing "run"
> (gdb) run > Starting program: /Users/mitsuru/Documents/OpenNI/openni_1_4_0_2/ > OpenNI-Bin-Dev-MacOSX-v1.4.0.2/Samples/Bin/x86-Release/Sample- > NiSimpleViewer > Reading symbols for shared libraries ++++
> +.......................................................................... ...................................................................... > done > Reading symbols for shared libraries . done > Reading symbols for shared libraries .... done > Reading symbols for shared libraries . done > Reading symbols for shared libraries . done > Reading symbols for shared libraries . done > Reading symbols for shared libraries . done > Reading symbols for shared libraries . done > Reading symbols for shared libraries . done > Reading symbols for shared libraries . done > Reading symbols for shared libraries . done
> Program received signal EXC_BAD_ACCESS, Could not access memory. > Reason: KERN_INVALID_ADDRESS at address: 0x00000000000000d8 > 0x0000000100418528 in XnDeviceModule::DoesPropertyExist ()
> If you need more information, please tell me.
> On 11月21日, 午後3:16, Ziv Hendel <z...@openni.org> wrote: > > Can you please run it from gdb so we can get a stack-trace and find > > the cause? > > To do so please do: > > gdb ./Sample-NiSimpleViewer > > then type "run" to start the program and after it crashes type > > "backtrace" and post the output here. > > Thanks, > > Ziv.
> > On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> > > Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late 2011). > > > But I got error, "Segmentation fault:11" when I execute sample > > > applications, for example, "Sample-NiSimpleViewer", "Sample- > > > NiSimpleSkeleton".
> > > Please help.
> > > On 11月21日, 午前3:47, Ziv Hendel <z...@openni.org> wrote:
> > > > Hi All,
> > > > A new "unstable" release was uploaded into thewww.openni.orgsite. > > > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > > *** The main feature of the release is the removal of the calibration > > > > pose! *** > > > > Please check out the new NiUserSelection sample that shows different > > > > mechanisms of how to pick the active users.
> > > > A complete list of changes will be posted tomorrow and the sources on > > > > GitHub will be updated later as well.
> > > > Please don't forget that this is a beta/unstable release so we'll > love > > > > as much feedback as possible!
> > > > Thanks, > > > > Ziv.
> -- > You received this message because you are subscribed to the Google Groups > "OpenNI" group. > To post to this group, send email to openni-dev@googlegroups.com. > To unsubscribe from this group, send email to > openni-dev+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/openni-dev?hl=en.
Are you using sensor kinect? If so, you need to reinstall it (by running the install.sh script). This is because the sensor kinect is based on an old version of the sensor module and it will cause the DoesPropertyExist crash. I guess it will be fixed when a new version based on sensor 5.0.5.1 will come out. Ziv.
On Nov 21, 1:08 pm, Abolfazl Zaraki <ab.zar...@gmail.com> wrote:
> With the new OpenNI1.4.0.2 and Nite1.5.0.1 ,SimpleViewer is working but > Usertracker Not! > I removed New Nite and installed previous version ( Nite1.4.1.2) with > OpenNI1.5.0.1 and it works great. > I think there is something wrong with new version of Nite.
> On Mon, Nov 21, 2011 at 11:59 AM, mmlemon <mitsuru.takeu...@gmail.com>wrote:
> > Thanks.
> > backtrace message is below:
> > #0 0x0000000100418528 in XnDeviceModule::DoesPropertyExist () > > #1 0x00000001004268ea in XnShiftToDepthStreamHelper::Init () > > #2 0x000000010040c510 in XnDepthStream::Init () > > #3 0x0000000100324f48 in XnSensorDepthStream::Init () > > #4 0x000000010041a320 in XnDeviceModuleHolder::Init () > > #5 0x0000000100412437 in XnDeviceBase::CreateStreamImpl () > > #6 0x0000000100315742 in XnSensor::CreateStreamImpl () > > #7 0x000000010040e1c9 in XnDeviceBase::CreateStream () > > #8 0x000000010030aa73 in XnExportedSensorGenerator::Create () > > #9 0x000000010033e54e in XnExportedSensorDepthGeneratorCreate () > > #10 0x00000001000e307d in XnModuleLoader::CreateRootNode () > > #11 0x0000000100100def in xnCreateProductionTreeImpl () > > #12 0x0000000100116036 in xnConfigureCreateNodes () > > #13 0x00000001000da7af in __ModuleScriptRun () > > #14 0x00000001000ff190 in xnScriptNodeRun () > > #15 0x0000000100101f7e in xnContextRunXmlScriptFromFileEx () > > #16 0x0000000100103bd1 in xnInitFromXmlFileEx () > > #17 0x00000001000019ed in main ()
> > And, this is the result message after typing "run"
> > +.......................................................................... ...................................................................... > > done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries .... done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries . done > > Reading symbols for shared libraries . done
> > Program received signal EXC_BAD_ACCESS, Could not access memory. > > Reason: KERN_INVALID_ADDRESS at address: 0x00000000000000d8 > > 0x0000000100418528 in XnDeviceModule::DoesPropertyExist ()
> > If you need more information, please tell me.
> > On 11月21日, 午後3:16, Ziv Hendel <z...@openni.org> wrote: > > > Can you please run it from gdb so we can get a stack-trace and find > > > the cause? > > > To do so please do: > > > gdb ./Sample-NiSimpleViewer > > > then type "run" to start the program and after it crashes type > > > "backtrace" and post the output here. > > > Thanks, > > > Ziv.
> > > On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> > > > Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late 2011). > > > > But I got error, "Segmentation fault:11" when I execute sample > > > > applications, for example, "Sample-NiSimpleViewer", "Sample- > > > > NiSimpleSkeleton".
> > > > > A new "unstable" release was uploaded into thewww.openni.orgsite. > > > > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > > > *** The main feature of the release is the removal of the calibration > > > > > pose! *** > > > > > Please check out the new NiUserSelection sample that shows different > > > > > mechanisms of how to pick the active users.
> > > > > A complete list of changes will be posted tomorrow and the sources on > > > > > GitHub will be updated later as well.
> > > > > Please don't forget that this is a beta/unstable release so we'll > > love > > > > > as much feedback as possible!
> > > > > Thanks, > > > > > Ziv.
> > -- > > You received this message because you are subscribed to the Google Groups > > "OpenNI" group. > > To post to this group, send email to openni-dev@googlegroups.com. > > To unsubscribe from this group, send email to > > openni-dev+unsubscribe@googlegroups.com. > > For more options, visit this group at > >http://groups.google.com/group/openni-dev?hl=en.
> Are you using sensor kinect? > If so, you need to reinstall it (by running the install.sh script). > This is because the sensor kinect is based on an old version of the > sensor module and it will cause the DoesPropertyExist crash. > I guess it will be fixed when a new version based on sensor 5.0.5.1 > will come out. > Ziv.
> On Nov 21, 1:08 pm, Abolfazl Zaraki <ab.zar...@gmail.com> wrote:
> > With the new OpenNI1.4.0.2 and Nite1.5.0.1 ,SimpleViewer is working but > > Usertracker Not! > > I removed New Nite and installed previous version ( Nite1.4.1.2) with > > OpenNI1.5.0.1 and it works great. > > I think there is something wrong with new version of Nite.
> > On Mon, Nov 21, 2011 at 11:59 AM, mmlemon <mitsuru.takeu...@gmail.com>wrote:
> > > Thanks.
> > > backtrace message is below:
> > > #0 0x0000000100418528 in XnDeviceModule::DoesPropertyExist () > > > #1 0x00000001004268ea in XnShiftToDepthStreamHelper::Init () > > > #2 0x000000010040c510 in XnDepthStream::Init () > > > #3 0x0000000100324f48 in XnSensorDepthStream::Init () > > > #4 0x000000010041a320 in XnDeviceModuleHolder::Init () > > > #5 0x0000000100412437 in XnDeviceBase::CreateStreamImpl () > > > #6 0x0000000100315742 in XnSensor::CreateStreamImpl () > > > #7 0x000000010040e1c9 in XnDeviceBase::CreateStream () > > > #8 0x000000010030aa73 in XnExportedSensorGenerator::Create () > > > #9 0x000000010033e54e in XnExportedSensorDepthGeneratorCreate () > > > #10 0x00000001000e307d in XnModuleLoader::CreateRootNode () > > > #11 0x0000000100100def in xnCreateProductionTreeImpl () > > > #12 0x0000000100116036 in xnConfigureCreateNodes () > > > #13 0x00000001000da7af in __ModuleScriptRun () > > > #14 0x00000001000ff190 in xnScriptNodeRun () > > > #15 0x0000000100101f7e in xnContextRunXmlScriptFromFileEx () > > > #16 0x0000000100103bd1 in xnInitFromXmlFileEx () > > > #17 0x00000001000019ed in main ()
> > > And, this is the result message after typing "run"
> > > Program received signal EXC_BAD_ACCESS, Could not access memory. > > > Reason: KERN_INVALID_ADDRESS at address: 0x00000000000000d8 > > > 0x0000000100418528 in XnDeviceModule::DoesPropertyExist ()
> > > If you need more information, please tell me.
> > > On 11月21日, 午後3:16, Ziv Hendel <z...@openni.org> wrote: > > > > Can you please run it from gdb so we can get a stack-trace and find > > > > the cause? > > > > To do so please do: > > > > gdb ./Sample-NiSimpleViewer > > > > then type "run" to start the program and after it crashes type > > > > "backtrace" and post the output here. > > > > Thanks, > > > > Ziv.
> > > > On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> > > > > Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late 2011). > > > > > But I got error, "Segmentation fault:11" when I execute sample > > > > > applications, for example, "Sample-NiSimpleViewer", "Sample- > > > > > NiSimpleSkeleton".
> > > > > > A new "unstable" release was uploaded into thewww.openni.orgsite. > > > > > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > > > > *** The main feature of the release is the removal of the calibration > > > > > > pose! *** > > > > > > Please check out the new NiUserSelection sample that shows different > > > > > > mechanisms of how to pick the active users.
> > > > > > A complete list of changes will be posted tomorrow and the sources on > > > > > > GitHub will be updated later as well.
> > > > > > Please don't forget that this is a beta/unstable release so we'll > > > love > > > > > > as much feedback as possible!
> > > > > > Thanks, > > > > > > Ziv.
> > > -- > > > You received this message because you are subscribed to the Google Groups > > > "OpenNI" group. > > > To post to this group, send email to openni-dev@googlegroups.com. > > > To unsubscribe from this group, send email to > > > openni-dev+unsubscribe@googlegroups.com. > > > For more options, visit this group at > > >http://groups.google.com/group/openni-dev?hl=en.
Tested this on windows 7 64 bit. SimpleViewer and NiViewer works for java wrappers and c++ implementation but user tracker fails giving no messages. I reverted NITE just as abolfazi observed and user tracker works fine.
On Mon, Nov 21, 2011 at 8:06 AM, mmlemon <mitsuru.takeu...@gmail.com> wrote: > Yes, I am using Sensor Kinect. > You mean, currently I cannot use new version of OpenNI to MS Kinect > device?
> On 11月21日, 午後10:46, Ziv Hendel <z...@openni.org> wrote: > > Are you using sensor kinect? > > If so, you need to reinstall it (by running the install.sh script). > > This is because the sensor kinect is based on an old version of the > > sensor module and it will cause the DoesPropertyExist crash. > > I guess it will be fixed when a new version based on sensor 5.0.5.1 > > will come out. > > Ziv.
> > On Nov 21, 1:08 pm, Abolfazl Zaraki <ab.zar...@gmail.com> wrote:
> > > With the new OpenNI1.4.0.2 and Nite1.5.0.1 ,SimpleViewer is working but > > > Usertracker Not! > > > I removed New Nite and installed previous version ( Nite1.4.1.2) with > > > OpenNI1.5.0.1 and it works great. > > > I think there is something wrong with new version of Nite.
> > > On Mon, Nov 21, 2011 at 11:59 AM, mmlemon <mitsuru.takeu...@gmail.com > >wrote:
> > > > Thanks.
> > > > backtrace message is below:
> > > > #0 0x0000000100418528 in XnDeviceModule::DoesPropertyExist () > > > > #1 0x00000001004268ea in XnShiftToDepthStreamHelper::Init () > > > > #2 0x000000010040c510 in XnDepthStream::Init () > > > > #3 0x0000000100324f48 in XnSensorDepthStream::Init () > > > > #4 0x000000010041a320 in XnDeviceModuleHolder::Init () > > > > #5 0x0000000100412437 in XnDeviceBase::CreateStreamImpl () > > > > #6 0x0000000100315742 in XnSensor::CreateStreamImpl () > > > > #7 0x000000010040e1c9 in XnDeviceBase::CreateStream () > > > > #8 0x000000010030aa73 in XnExportedSensorGenerator::Create () > > > > #9 0x000000010033e54e in XnExportedSensorDepthGeneratorCreate () > > > > #10 0x00000001000e307d in XnModuleLoader::CreateRootNode () > > > > #11 0x0000000100100def in xnCreateProductionTreeImpl () > > > > #12 0x0000000100116036 in xnConfigureCreateNodes () > > > > #13 0x00000001000da7af in __ModuleScriptRun () > > > > #14 0x00000001000ff190 in xnScriptNodeRun () > > > > #15 0x0000000100101f7e in xnContextRunXmlScriptFromFileEx () > > > > #16 0x0000000100103bd1 in xnInitFromXmlFileEx () > > > > #17 0x00000001000019ed in main ()
> > > > And, this is the result message after typing "run"
> > > > Program received signal EXC_BAD_ACCESS, Could not access memory. > > > > Reason: KERN_INVALID_ADDRESS at address: 0x00000000000000d8 > > > > 0x0000000100418528 in XnDeviceModule::DoesPropertyExist ()
> > > > If you need more information, please tell me.
> > > > On 11月21日, 午後3:16, Ziv Hendel <z...@openni.org> wrote: > > > > > Can you please run it from gdb so we can get a stack-trace and find > > > > > the cause? > > > > > To do so please do: > > > > > gdb ./Sample-NiSimpleViewer > > > > > then type "run" to start the program and after it crashes type > > > > > "backtrace" and post the output here. > > > > > Thanks, > > > > > Ziv.
> > > > > On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> > > > > > Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late > 2011). > > > > > > But I got error, "Segmentation fault:11" when I execute sample > > > > > > applications, for example, "Sample-NiSimpleViewer", "Sample- > > > > > > NiSimpleSkeleton".
> > > > > > > A new "unstable" release was uploaded into > thewww.openni.orgsite. > > > > > > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > > > > > *** The main feature of the release is the removal of the > calibration > > > > > > > pose! *** > > > > > > > Please check out the new NiUserSelection sample that shows > different > > > > > > > mechanisms of how to pick the active users.
> > > > > > > A complete list of changes will be posted tomorrow and the > sources on > > > > > > > GitHub will be updated later as well.
> > > > > > > Please don't forget that this is a beta/unstable release so > we'll > > > > love > > > > > > > as much feedback as possible!
> > > > > > > Thanks, > > > > > > > Ziv.
> > > > -- > > > > You received this message because you are subscribed to the Google > Groups > > > > "OpenNI" group. > > > > To post to this group, send email to openni-dev@googlegroups.com. > > > > To unsubscribe from this group, send email to > > > > openni-dev+unsubscribe@googlegroups.com. > > > > For more options, visit this group at > > > >http://groups.google.com/group/openni-dev?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "OpenNI" group. > To post to this group, send email to openni-dev@googlegroups.com. > To unsubscribe from this group, send email to > openni-dev+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/openni-dev?hl=en.
Could you clarify which version of SensorKinect one is supposed to use on OS X? With the previous version of NITE and OPENNI I only had luck with Avin's patched version, because original SensorKinect of OS X did not work. What about this release? Avin's version is not updated ASAIK at this time... Which version of sensor kinect is recommended for OS X with this release of OPENNI and NITE?
Thanks a lot.
--X
On Nov 21, 8:46 am, Ziv Hendel <z...@openni.org> wrote:
> Are you using sensor kinect? > If so, you need to reinstall it (by running the install.sh script). > This is because the sensor kinect is based on an old version of the > sensor module and it will cause the DoesPropertyExist crash. > I guess it will be fixed when a new version based on sensor 5.0.5.1 > will come out. > Ziv.
Same issue here, UserTracker sample exists without warning. (OSX - nite-bin-macosx-v1.5.0.1 - OpenNI-Bin-Dev-MacOSX-v1.4.0.2 - SensorKinect-Bin-MacOSX-v5.0.3.4). If I revert nite to 1.4, sample works (but with calibration pose).
On Nov 21, 6:48 pm, Xsu Ma <zab...@gmail.com> wrote:
> Could you clarify which version of SensorKinect one is supposed to use > on OS X? With the previous version of NITE and OPENNI I only had luck > with Avin's patched version, because original SensorKinect of OS X did > not work. What about this release? Avin's version is not updated ASAIK > at this time... Which version of sensor kinect is recommended for OS X > with this release of OPENNI and NITE?
> Thanks a lot.
> --X
> On Nov 21, 8:46 am, Ziv Hendel <z...@openni.org> wrote:
> > Are you using sensor kinect? > > If so, you need to reinstall it (by running the install.sh script). > > This is because the sensor kinect is based on an old version of the > > sensor module and it will cause the DoesPropertyExist crash. > > I guess it will be fixed when a new version based on sensor 5.0.5.1 > > will come out. > > Ziv.
> Same issue here, UserTracker sample exists without warning. (OSX - > nite-bin-macosx-v1.5.0.1 - OpenNI-Bin-Dev-MacOSX-v1.4.0.2 - > SensorKinect-Bin-MacOSX-v5.0.3.4). If I revert nite to 1.4, sample > works (but with calibration pose).
> On Nov 21, 6:48 pm, Xsu Ma <zab...@gmail.com> wrote:
> > Ziv,
> > Could you clarify which version of SensorKinect one is supposed to use > > on OS X? With the previous version of NITE and OPENNI I only had luck > > with Avin's patched version, because original SensorKinect of OS X did > > not work. What about this release? Avin's version is not updated ASAIK > > at this time... Which version of sensor kinect is recommended for OS X > > with this release of OPENNI and NITE?
> > Thanks a lot.
> > --X
> > On Nov 21, 8:46 am, Ziv Hendel <z...@openni.org> wrote:
> > > Are you using sensor kinect? > > > If so, you need to reinstall it (by running the install.sh script). > > > This is because the sensor kinect is based on an old version of the > > > sensor module and it will cause the DoesPropertyExist crash. > > > I guess it will be fixed when a new version based on sensor 5.0.5.1 > > > will come out. > > > Ziv.
> Tested this on windows 7 64 bit. SimpleViewer and NiViewer works for java > wrappers and c++ implementation but user tracker fails giving no messages. > I reverted NITE just as abolfazi observed and user tracker works fine.
> -Siddharth
> On Mon, Nov 21, 2011 at 8:06 AM, mmlemon <mitsuru.takeu...@gmail.com> wrote: > > Yes, I am using Sensor Kinect. > > You mean, currently I cannot use new version of OpenNI to MS Kinect > > device?
> > On 11月21日, 午後10:46, Ziv Hendel <z...@openni.org> wrote: > > > Are you using sensor kinect? > > > If so, you need to reinstall it (by running the install.sh script). > > > This is because the sensor kinect is based on an old version of the > > > sensor module and it will cause the DoesPropertyExist crash. > > > I guess it will be fixed when a new version based on sensor 5.0.5.1 > > > will come out. > > > Ziv.
> > > On Nov 21, 1:08 pm, Abolfazl Zaraki <ab.zar...@gmail.com> wrote:
> > > > With the new OpenNI1.4.0.2 and Nite1.5.0.1 ,SimpleViewer is working but > > > > Usertracker Not! > > > > I removed New Nite and installed previous version ( Nite1.4.1.2) with > > > > OpenNI1.5.0.1 and it works great. > > > > I think there is something wrong with new version of Nite.
> > > > On Mon, Nov 21, 2011 at 11:59 AM, mmlemon <mitsuru.takeu...@gmail.com > > >wrote:
> > > > > Thanks.
> > > > > backtrace message is below:
> > > > > #0 0x0000000100418528 in XnDeviceModule::DoesPropertyExist () > > > > > #1 0x00000001004268ea in XnShiftToDepthStreamHelper::Init () > > > > > #2 0x000000010040c510 in XnDepthStream::Init () > > > > > #3 0x0000000100324f48 in XnSensorDepthStream::Init () > > > > > #4 0x000000010041a320 in XnDeviceModuleHolder::Init () > > > > > #5 0x0000000100412437 in XnDeviceBase::CreateStreamImpl () > > > > > #6 0x0000000100315742 in XnSensor::CreateStreamImpl () > > > > > #7 0x000000010040e1c9 in XnDeviceBase::CreateStream () > > > > > #8 0x000000010030aa73 in XnExportedSensorGenerator::Create () > > > > > #9 0x000000010033e54e in XnExportedSensorDepthGeneratorCreate () > > > > > #10 0x00000001000e307d in XnModuleLoader::CreateRootNode () > > > > > #11 0x0000000100100def in xnCreateProductionTreeImpl () > > > > > #12 0x0000000100116036 in xnConfigureCreateNodes () > > > > > #13 0x00000001000da7af in __ModuleScriptRun () > > > > > #14 0x00000001000ff190 in xnScriptNodeRun () > > > > > #15 0x0000000100101f7e in xnContextRunXmlScriptFromFileEx () > > > > > #16 0x0000000100103bd1 in xnInitFromXmlFileEx () > > > > > #17 0x00000001000019ed in main ()
> > > > > And, this is the result message after typing "run"
> > > > > Program received signal EXC_BAD_ACCESS, Could not access memory. > > > > > Reason: KERN_INVALID_ADDRESS at address: 0x00000000000000d8 > > > > > 0x0000000100418528 in XnDeviceModule::DoesPropertyExist ()
> > > > > If you need more information, please tell me.
> > > > > On 11月21日, 午後3:16, Ziv Hendel <z...@openni.org> wrote: > > > > > > Can you please run it from gdb so we can get a stack-trace and find > > > > > > the cause? > > > > > > To do so please do: > > > > > > gdb ./Sample-NiSimpleViewer > > > > > > then type "run" to start the program and after it crashes type > > > > > > "backtrace" and post the output here. > > > > > > Thanks, > > > > > > Ziv.
> > > > > > On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> > > > > > > Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late > > 2011). > > > > > > > But I got error, "Segmentation fault:11" when I execute sample > > > > > > > applications, for example, "Sample-NiSimpleViewer", "Sample- > > > > > > > NiSimpleSkeleton".
> > > > > > > > A new "unstable" release was uploaded into > > thewww.openni.orgsite. > > > > > > > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > > > > > > *** The main feature of the release is the removal of the > > calibration > > > > > > > > pose! *** > > > > > > > > Please check out the new NiUserSelection sample that shows > > different > > > > > > > > mechanisms of how to pick the active users.
> > > > > > > > A complete list of changes will be posted tomorrow and the > > sources on > > > > > > > > GitHub will be updated later as well.
> > > > > > > > Please don't forget that this is a beta/unstable release so > > we'll > > > > > love > > > > > > > > as much feedback as possible!
> > > > > > > > Thanks, > > > > > > > > Ziv.
> > > > > -- > > > > > You received this message because you are subscribed to the Google > > Groups > > > > > "OpenNI" group. > > > > > To post to this group, send email to openni-dev@googlegroups.com. > > > > > To unsubscribe from this group, send email to > > > > > openni-dev+unsubscribe@googlegroups.com. > > > > > For more options, visit this group at > > > > >http://groups.google.com/group/openni-dev?hl=en.
> > -- > > You received this message because you are subscribed to the Google Groups > > "OpenNI" group. > > To post to this group, send email to openni-dev@googlegroups.com. > > To unsubscribe from this group, send email to > > openni-dev+unsubscribe@googlegroups.com. > > For more options, visit this group at > >http://groups.google.com/group/openni-dev?hl=en.
Hi All! We have finally found the root cause of the crash in the new unstable NITE version. A fix will come out tomorrow hopefully! Thanks and sorry for the troubles, Ziv.
On Nov 20, 8:47 pm, Ziv Hendel <z...@openni.org> wrote:
> A new "unstable" release was uploaded into thewww.openni.orgsite. > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> *** The main feature of the release is the removal of the calibration > pose! *** > Please check out the new NiUserSelection sample that shows different > mechanisms of how to pick the active users.
> A complete list of changes will be posted tomorrow and the sources on > GitHub will be updated later as well.
> Please don't forget that this is a beta/unstable release so we'll love > as much feedback as possible!
> Hi All! > We have finally found the root cause of the crash in the new unstable > NITE version. > A fix will come out tomorrow hopefully! > Thanks and sorry for the troubles, > Ziv.
> On Nov 20, 8:47 pm, Ziv Hendel <z...@openni.org> wrote:
> > Hi All,
> > A new "unstable" release was uploaded into thewww.openni.orgsite. > > (OpenNI - 1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > *** The main feature of the release is the removal of the calibration > > pose! *** > > Please check out the new NiUserSelection sample that shows different > > mechanisms of how to pick the active users.
> > A complete list of changes will be posted tomorrow and the sources on > > GitHub will be updated later as well.
> > Please don't forget that this is a beta/unstable release so we'll love > > as much feedback as possible!
> Tested this on windows 7 64 bit. SimpleViewer and NiViewer works for java > wrappers and c++ implementation but user tracker fails giving no messages. > I reverted NITE just as abolfazi observed and user tracker works fine.
> -Siddharth
> On Mon, Nov 21, 2011 at 8:06 AM, mmlemon <mitsuru.takeu...@gmail.com> wrote: > > Yes, I am using Sensor Kinect. > > You mean, currently I cannot use new version of OpenNI to MS Kinect > > device?
> > On 11月21日, 午後10:46, Ziv Hendel <z...@openni.org> wrote: > > > Are you using sensor kinect? > > > If so, you need to reinstall it (by running the install.sh script). > > > This is because the sensor kinect is based on an old version of the > > > sensor module and it will cause the DoesPropertyExist crash. > > > I guess it will be fixed when a new version based on sensor 5.0.5.1 > > > will come out. > > > Ziv.
> > > On Nov 21, 1:08 pm, Abolfazl Zaraki <ab.zar...@gmail.com> wrote:
> > > > With the new OpenNI1.4.0.2 and Nite1.5.0.1 ,SimpleViewer is working but > > > > Usertracker Not! > > > > I removed New Nite and installed previous version ( Nite1.4.1.2) with > > > > OpenNI1.5.0.1 and it works great. > > > > I think there is something wrong with new version of Nite.
> > > > On Mon, Nov 21, 2011 at 11:59 AM, mmlemon <mitsuru.takeu...@gmail.com > > >wrote:
> > > > > Thanks.
> > > > > backtrace message is below:
> > > > > #0 0x0000000100418528 in XnDeviceModule::DoesPropertyExist () > > > > > #1 0x00000001004268ea in XnShiftToDepthStreamHelper::Init () > > > > > #2 0x000000010040c510 in XnDepthStream::Init () > > > > > #3 0x0000000100324f48 in XnSensorDepthStream::Init () > > > > > #4 0x000000010041a320 in XnDeviceModuleHolder::Init () > > > > > #5 0x0000000100412437 in XnDeviceBase::CreateStreamImpl () > > > > > #6 0x0000000100315742 in XnSensor::CreateStreamImpl () > > > > > #7 0x000000010040e1c9 in XnDeviceBase::CreateStream () > > > > > #8 0x000000010030aa73 in XnExportedSensorGenerator::Create () > > > > > #9 0x000000010033e54e in XnExportedSensorDepthGeneratorCreate () > > > > > #10 0x00000001000e307d in XnModuleLoader::CreateRootNode () > > > > > #11 0x0000000100100def in xnCreateProductionTreeImpl () > > > > > #12 0x0000000100116036 in xnConfigureCreateNodes () > > > > > #13 0x00000001000da7af in __ModuleScriptRun () > > > > > #14 0x00000001000ff190 in xnScriptNodeRun () > > > > > #15 0x0000000100101f7e in xnContextRunXmlScriptFromFileEx () > > > > > #16 0x0000000100103bd1 in xnInitFromXmlFileEx () > > > > > #17 0x00000001000019ed in main ()
> > > > > And, this is the result message after typing "run"
> > > > > Program received signal EXC_BAD_ACCESS, Could not access memory. > > > > > Reason: KERN_INVALID_ADDRESS at address: 0x00000000000000d8 > > > > > 0x0000000100418528 in XnDeviceModule::DoesPropertyExist ()
> > > > > If you need more information, please tell me.
> > > > > On 11月21日, 午後3:16, Ziv Hendel <z...@openni.org> wrote: > > > > > > Can you please run it from gdb so we can get a stack-trace and find > > > > > > the cause? > > > > > > To do so please do: > > > > > > gdb ./Sample-NiSimpleViewer > > > > > > then type "run" to start the program and after it crashes type > > > > > > "backtrace" and post the output here. > > > > > > Thanks, > > > > > > Ziv.
> > > > > > On Nov 21, 4:16 am, mmlemon <mitsuru.takeu...@gmail.com> wrote:
> > > > > > > Hi, I was able to install OpenNI-1.4.0.2 on MacBook Pro (late > > 2011). > > > > > > > But I got error, "Segmentation fault:11" when I execute sample > > > > > > > applications, for example, "Sample-NiSimpleViewer", "Sample- > > > > > > > NiSimpleSkeleton".
> > > > > > > > A new "unstable" release was uploaded into > > thewww.openni.orgsite. > > > > > > > > (OpenNI -1.4.0.2, NiTE - 1.5.0.1, Sensor - 5.0.5.1).
> > > > > > > > *** The main feature of the release is the removal of the > > calibration > > > > > > > > pose! *** > > > > > > > > Please check out the new NiUserSelection sample that shows > > different > > > > > > > > mechanisms of how to pick the active users.
> > > > > > > > A complete list of changes will be posted tomorrow and the > > sources on > > > > > > > > GitHub will be updated later as well.
> > > > > > > > Please don't forget that this is a beta/unstable release so > > we'll > > > > > love > > > > > > > > as much feedback as possible!
> > > > > > > > Thanks, > > > > > > > > Ziv.
> > > > > -- > > > > > You received this message because you are subscribed to the Google > > Groups > > > > > "OpenNI" group. > > > > > To post to this group, send email to openni-dev@googlegroups.com. > > > > > To unsubscribe from this group, send email to > > > > > openni-dev+unsubscribe@googlegroups.com. > > > > > For more options, visit this group at > > > > >http://groups.google.com/group/openni-dev?hl=en.
> > -- > > You received this message because you are subscribed to the Google Groups > > "OpenNI" group. > > To post to this group, send email to openni-dev@googlegroups.com. > > To unsubscribe from this group, send email to > > openni-dev+unsubscribe@googlegroups.com. > > For more options, visit this group at > >http://groups.google.com/group/openni-dev?hl=en.
