Kernel Oops

21 views
Skip to first unread message

Kevin Ye

unread,
Oct 14, 2009, 6:11:21 PM10/14/09
to open-...@googlegroups.com
Hi All,

We hit the kernel oops again on our setup. Any suggestion to fix that? Thanks.

Our set up is:
kernel: 2.6.24-24
open-iscsi: 2.0-870.3

kernel logs:
Oct  9 21:15:50 ian_ser_2 kernel: [28466.697051] scsi841 : iSCSI Initiator over TCP/IP
Oct  9 21:15:50 ian_ser_2 kernel: [28466.962031] scsi 841:0:0:201: Direct-Access     IET      VIRTUAL-DISK     0    PQ: 0 ANSI: 4
Oct  9 21:15:50 ian_ser_2 kernel: [28466.969109] sd 841:0:0:201: [sdd] 4505472 512-byte hardware sectors (2307 MB)
Oct  9 21:15:50 ian_ser_2 kernel: [28466.973314] sd 841:0:0:201: [sdd] Write Protect is off
Oct  9 21:15:50 ian_ser_2 kernel: [28466.973320] sd 841:0:0:201: [sdd] Mode Sense: 77 00 00 08
Oct  9 21:15:50 ian_ser_2 kernel: [28466.975420] sd 841:0:0:201: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Oct  9 21:15:50 ian_ser_2 kernel: [28466.977468] sd 841:0:0:201: [sdd] 4505472 512-byte hardware sectors (2307 MB)
Oct  9 21:15:50 ian_ser_2 kernel: [28466.977938] sd 841:0:0:201: [sdd] Write Protect is off
Oct  9 21:15:50 ian_ser_2 kernel: [28466.977944] sd 841:0:0:201: [sdd] Mode Sense: 77 00 00 08
Oct  9 21:15:50 ian_ser_2 kernel: [28466.981749] sd 841:0:0:201: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Oct  9 21:15:50 ian_ser_2 kernel: [28466.981761]  sdd: sdd1
Oct  9 21:15:50 ian_ser_2 kernel: [28467.027801] sd 841:0:0:201: [sdd] Attached SCSI disk
Oct  9 21:15:50 ian_ser_2 kernel: [28467.027886] sd 841:0:0:201: Attached scsi generic sg4 type 0
Oct  9 21:16:01 ian_ser_2 kernel: [28477.713280]  connection626:0: ping timeout of 15 secs expired, last rx 7049831, last ping 7052331, now 7056081
Oct  9 21:16:01 ian_ser_2 kernel: [28477.713467]  connection626:0: detected conn error (1011)
Oct  9 21:16:01 ian_ser_2 kernel: [28477.717268]  connection627:0: ping timeout of 15 secs expired, last rx 7049832, last ping 7052332, now 7056082
Oct  9 21:16:01 ian_ser_2 kernel: [28477.717458]  connection627:0: detected conn error (1011)
Oct  9 21:16:10 ian_ser_2 kernel: [28486.049414] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000060
Oct  9 21:16:10 ian_ser_2 kernel: [28486.049639] printing eip: e08a212a *pde = 00000000
Oct  9 21:16:10 ian_ser_2 kernel: [28486.049924] Oops: 0000 [#1] SMP
Oct  9 21:16:10 ian_ser_2 kernel: [28486.050100] Modules linked in: iscsi_tcp libiscsi scsi_transport_iscsi iscsi_trgt crc32c libcrc32c nls_iso8859_1 nls_cp437 vfat fat vmmemctl cpufreq_conservative cpufreq_ondemand cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave sbs video output sbshc dock battery iptable_filter ip_tables x_tables vmhgfs lp loop ipv6 container serio_raw ac button evdev parport_pc parport i2c_piix4 i2c_core intel_agp agpgart shpchp pci_hotplug psmouse pcspkr ext3 jbd mbcache sd_mod sg sr_mod cdrom pata_acpi ata_generic floppy pcnet32 mii mptspi mptscsih mptbase scsi_transport_spi ata_piix libata scsi_mod raid10 raid456 async_xor async_memcpy async_tx xor raid1 raid0 multipath linear md_mod dm_mirror dm_snapshot dm_mod thermal processor fan fbcon tileblit font bitblit softcursor fuse vmxnet
Oct  9 21:16:10 ian_ser_2 kernel: [28486.051174]

Oct  9 21:16:10 ian_ser_2 kernel: [28486.051174]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.051286] Pid: 16444, comm: iscsi_scan_839 Not tainted (2.6.24-24-generic #1)
Oct  9 21:16:10 ian_ser_2 kernel: [28486.051433] EIP: 0060:[<e08a212a>] EFLAGS: 00010202 CPU: 0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052073] EIP is at spi_device_match+0x1a/0x60 [scsi_transport_spi]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052178] EAX: 00000000 EBX: c27ff0b0 ECX: c27ff000 EDX: c27ff0b0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052274] ESI: c27ff0b0 EDI: d0c31800 EBP: c0286000 ESP: dc1dfef0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052367]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052473] Process iscsi_scan_839 (pid: 16444, ti=dc1de000 task=d7823140 task.ti=dc1de000)
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052586] Stack: e08a7c90 c0285c8f e095e328 c27ff1d8 cc1c3430 c27ff000 c27ff0b0 d0c31800
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052792]        00000202 e09449cd c27ff000 cc1c3430 e0944a2f c27ff000 cc1c3400 e0944acc
Oct  9 21:16:10 ian_ser_2 kernel: [28486.052944]        d0c31814 cc1c30a4 e0944b50 00000000 e0944b64 00000000 c02805c2 cc1c30a4
Oct  9 21:16:10 ian_ser_2 kernel: [28486.053101] Call Trace:
Oct  9 21:16:10 ian_ser_2 kernel: [28486.053340]  [<c0285c8f>] attribute_container_device_trigger+0x4f/0xb0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.053963]  [<e09449cd>] __scsi_remove_device+0x3d/0x80 [scsi_mod]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054083]  [<e0944a2f>] scsi_remove_device+0x1f/0x30 [scsi_mod]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054185]  [<e0944acc>] __scsi_remove_target+0x8c/0xc0 [scsi_mod]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054284]  [<e0944b50>] __remove_child+0x0/0x20 [scsi_mod]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054380]  [<e0944b64>] __remove_child+0x14/0x20 [scsi_mod]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054474]  [<c02805c2>] device_for_each_child+0x22/0x40
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054561]  [<e09ae7f0>] __iscsi_unbind_session+0x0/0xa0 [scsi_transport_iscsi]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054709]  [<e0944b3e>] scsi_remove_target+0x3e/0x50 [scsi_mod]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054807]  [<e09ae85c>] __iscsi_unbind_session+0x6c/0xa0 [scsi_transport_iscsi]
Oct  9 21:16:10 ian_ser_2 kernel: [28486.054952]  [<c013ce6f>] run_workqueue+0xbf/0x160
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055040]  [<c013d910>] worker_thread+0x0/0xe0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055116]  [<c013d994>] worker_thread+0x84/0xe0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055238]  [<c0140c20>] autoremove_wake_function+0x0/0x40
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055323]  [<c013d910>] worker_thread+0x0/0xe0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055398]  [<c0140962>] kthread+0x42/0x70
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055469]  [<c0140920>] kthread+0x0/0x70
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055541]  [<c0105667>] kernel_thread_helper+0x7/0x10
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055742]  =======================
Oct  9 21:16:10 ian_ser_2 kernel: [28486.055828] Code: 08 88 50 07 b8 08 00 00 00 c3 8d b4 26 00 00 00 00 53 89 d0 89 d3 e8 b6 1b 0a 00 85 c0 74 1c 8b 83 50 ff ff ff 8d 8b 50 ff ff ff <8b> 40 60 85 c0 74 09 81 78 1c c0 7c 8a e0 74 06 31 c0 5b c3 66
Oct  9 21:16:10 ian_ser_2 kernel: [28486.056243] EIP: [<e08a212a>] spi_device_match+0x1a/0x60 [scsi_transport_spi] SS:ESP 0068:dc1dfef0
Oct  9 21:16:10 ian_ser_2 kernel: [28486.057126] ---[ end trace dda5576840946286 ]---



Mike Christie

unread,
Oct 15, 2009, 2:06:54 PM10/15/09
to open-...@googlegroups.com
On 10/14/2009 05:11 PM, Kevin Ye wrote:
> Hi All,
>
> We hit the kernel oops again on our setup. Any suggestion to fix that?

If you just login then logout manually

iscsiadm -m session -u

Does that cause an oops?


If you log back in, then pull the network cable, wait to see the ping
timeout messages then manually logout

iscsiadm -m session -u

Does that cause an oops?


Can you rebuild your kernel, if I send you a patch?

Kevin Ye

unread,
Oct 15, 2009, 4:32:59 PM10/15/09
to open-...@googlegroups.com
Thanks Mike.

I did the tests you mentioned a couple of times, and it didn't cause kernel oops.

The kernel Oops I hit does not happen often. I hit twice in last 4 weeks.

kernel patch is welcome and I will give it a try. Thanks.

Kevin

Mike Christie

unread,
Oct 21, 2009, 2:46:00 PM10/21/09
to open-...@googlegroups.com
Kevin Ye wrote:
> Thanks Mike.
>
> I did the tests you mentioned a couple of times, and it didn't cause kernel
> oops.
>
> The kernel Oops I hit does not happen often. I hit twice in last 4 weeks.
>
> kernel patch is welcome and I will give it a try. Thanks.
>

Shoot, let me do some digging. I was hopping one of those manual
commands would fire the problem. The one where you pull the cable
yourself should have run over the same code and caused it.

Are you using multipath? If not, for now you can just disble nops/pings.
Set the noop timeout and noop interval to 0 for every target you have
setup, and set this in the iscsid.conf (you could also set it in
iscsid.conf then rediscovery the targets so it will get picked up).

Kevin Ye

unread,
Oct 22, 2009, 6:12:03 PM10/22/09
to open-...@googlegroups.com
Thanks Mike.

I suspect that this problem is related the half-way done login when the network is down. That is, before the login process finish, the network is down and after 15 seconds of network down, it tries to fail the connection but the connection is half-way done, the device or other properties is NULL which causes kernel oops.

I tried to reproduce this but introduce other problem. I may failed the network not the right time.

The other problem I hit is login fails, but leave the target name in the kernel NULL, which cause logout fail. The only way to resolve this is to restart the machine. The error output of logout is:
iscsiadm --mode node --logout all
iscsiadm: could not read session targetname: 61
iscsiadm: could not find session info for session127

iscsiadm: initiator reported error (15 - already exists)

So my conclusion is that the network failure in the middle of login is not nicely handled.

I am still trying to reproduce the kernel oops other then the second error.

If you have any suggestion we should do, please let me know. Thanks.

Kevin

Kevin Ye

unread,
Oct 26, 2009, 12:52:20 PM10/26/09
to open-...@googlegroups.com
Hi Mike,

I reproduced this problem with two simple scripts, one is to continuous login and then logout a target, the other script randomly fails the network and resume the network after 30 or 200 seconds.

script1:
while [ 1 ]
do
  date
  iscsiadm -m node -l -T [target_name]-p [target_ip]
  date
  iscsiadm -m node -u -T [target_name] -p [target_ip]
done

script 2:
while [ 1 ]
do
  echo "failing the wan"
  ./disconnectip.sh 192.168.1.160
  sleep 30
  echo "unfailing the wan"
  ./reconnectip.sh 192.168.1.160
  sleep 300
  echo "failing the wan"
  ./disconnectip.sh 192.168.1.160
  sleep 200
  echo "unfailing the wan"
  ./reconnectip.sh 192.168.1.160
done

I hit the oops after 1 days of test. In this test, I didn't hit target NULL problem during logout. I think that the target NULL problem I mentioned before is caused by the killing of login process in my script due to timeout.

I analyzed all the kernel oops I hit so far, it seems that if the network is failed just before the login process finish, then after 15 seconds of network down (less than 15 seconds after we see the kernel messate "Attached SCSI disk"), it complains "connectionx:0: ping timeout of 15 secs expired, last rx x, last ping x, now x".

Any idea what's the problem? Thanks.

Regards,
Kevin

Mike Christie

unread,
Oct 27, 2009, 6:12:39 PM10/27/09
to open-...@googlegroups.com

Your original problem came when the network was not accessible. The
iscsi initiator sends a iscsi ping every noop_timout seconds. When you
saw the ping/nop timeout message it means that a iscsi ping timedout.
The iscsi initiator will then, drop the connection and try to relogin
every X seconds.

In the oops you sent we saw that something was forcing a logout and
shutdown of the session at this time, but what I cannot figure out is
why the oops is failing in code not related to iscsi. For some reason we
are in the SPI code (so something related to mptspi maybe, which uses
scsi_transport_spi which where spi_device_match is.

> > >>> Oct 9 21:16:10 ian_ser_2 kernel: [28486.052073] EIP is at
> > >>> spi_device_match+0x1a/0x60 [scsi_transport_spi]
> > >>> Oct 9 21:16:10 ian_ser_2 kernel: [28486.052178] EAX: 00000000 EBX:
> >> c27ff0b0
> > >>> ECX: c27ff000 EDX: c27ff0b0
> > >>> Oct 9 21:16:10 ian_ser_2 kernel: [28486.052274] ESI: c27ff0b0 EDI:
> >> d0c31800

I think I saw this with older kernels, which is why I asked for you to
try a newer one before. However, I was looking through the git commits
and did not see any related fixes so I am not sure.

In the original problem, where you running a logout command manually or
did you run somehting like /etc/init.d/iscsi restart (script name may be
different)

In the oopses in your new tests, are you failing in the same place (in
spi_device_match)?

Kevin Ye

unread,
Oct 27, 2009, 6:42:28 PM10/27/09
to open-...@googlegroups.com
Thanks a lot for your explaination, Mike.

In my orginal problem, a logout was issued manually after login. At the time of this command was issued, kernel oops happened.

For the new test, it failed int the same place (in spi_device_match). I cannot track the time when logout was issued, but I suspect it was the same time when kernel oops happened. Below is the kernel log in my new test.

-Kevin


Oct 24 14:00:48 qye-cms kernel: [184273.268108] scsi55415 : iSCSI Initiator over TCP/IP
Oct 24 14:00:48 qye-cms kernel: [184273.523222] scsi 55415:0:0:91: Direct-Access     IET      VIRTUAL-DISK     0    PQ: 0 ANSI: 4
Oct 24 14:00:48 qye-cms kernel: [184273.528678] sd 55415:0:0:91: [sdb] 1024000 512-byte hardware sectors (524 MB)
Oct 24 14:00:48 qye-cms kernel: [184273.529105] sd 55415:0:0:91: [sdb] Write Protect is off
Oct 24 14:00:48 qye-cms kernel: [184273.529109] sd 55415:0:0:91: [sdb] Mode Sense: 77 00 00 08
Oct 24 14:00:48 qye-cms kernel: [184273.529545] sd 55415:0:0:91: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 24 14:00:48 qye-cms kernel: [184273.530040] sd 55415:0:0:91: [sdb] 1024000 512-byte hardware sectors (524 MB)
Oct 24 14:00:48 qye-cms kernel: [184273.531361] sd 55415:0:0:91: [sdb] Write Protect is off
Oct 24 14:00:48 qye-cms kernel: [184273.531367] sd 55415:0:0:91: [sdb] Mode Sense: 77 00 00 08
Oct 24 14:00:48 qye-cms kernel: [184273.533646] sd 55415:0:0:91: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 24 14:01:08 qye-cms kernel: [184273.533654]  sdb:<3> connection55413:0: ping timeout of 15 secs expired, last rx 46079163, last ping 46080413, now 46084163
Oct 24 14:01:08 qye-cms kernel: [184293.496601]  connection55413:0: detected conn error (1011)
Oct 24 14:03:08 qye-cms kernel: [184413.530473]  session55413: session recovery timed out after 120 secs
Oct 24 14:03:08 qye-cms kernel: [184413.534610] sd 55415:0:0:91: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
Oct 24 14:03:08 qye-cms kernel: [184413.534697] end_request: I/O error, dev sdb, sector 8
Oct 24 14:03:08 qye-cms kernel: [184413.534804] Buffer I/O error on device sdb, logical block 1
Oct 24 14:03:08 qye-cms kernel: [184413.535039] sd 55415:0:0:91: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
Oct 24 14:03:08 qye-cms kernel: [184413.535044] end_request: I/O error, dev sdb, sector 8
Oct 24 14:03:08 qye-cms kernel: [184413.535053] Buffer I/O error on device sdb, logical block 1
Oct 24 14:03:08 qye-cms kernel: [184413.535163] Dev sdb: unable to read RDB block 8
Oct 24 14:03:08 qye-cms kernel: [184413.537038] sd 55415:0:0:91: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
Oct 24 14:03:08 qye-cms kernel: [184413.537048] end_request: I/O error, dev sdb, sector 24
Oct 24 14:03:08 qye-cms kernel: [184413.537057] Buffer I/O error on device sdb, logical block 3
Oct 24 14:03:08 qye-cms kernel: [184413.537185] sd 55415:0:0:91: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
Oct 24 14:03:08 qye-cms kernel: [184413.537189] end_request: I/O error, dev sdb, sector 24
Oct 24 14:03:08 qye-cms kernel: [184413.537192] Buffer I/O error on device sdb, logical block 3
Oct 24 14:03:08 qye-cms kernel: [184413.537326]  unable to read partition table
Oct 24 14:03:08 qye-cms kernel: [184413.537398] sd 55415:0:0:91: [sdb] Attached SCSI disk
Oct 24 14:03:08 qye-cms kernel: [184413.537478] sd 55415:0:0:91: Attached scsi generic sg1 type 0
Oct 24 14:05:03 qye-cms kernel: [184413.597688] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000060
Oct 24 14:05:03 qye-cms kernel: [184413.684629] printing eip: e08a212a *pde = 00000000
Oct 24 14:05:03 qye-cms kernel: [184413.684907] Oops: 0000 [#1] SMP
Oct 24 14:05:03 qye-cms kernel: [184413.685202] Modules linked in: iscsi_trgt crc32c libcrc32c vmblock vmmemctl cpufreq_conservative cpufreq_ondemand cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave sbs video output sbshc dock battery iptable_filter ip_tables x_tables vmhgfs iscsi_tcp libiscsi scsi_transport_iscsi lp loop ipv6 parport_pc parport evdev container serio_raw psmouse ac button i2c_piix4 intel_agp i2c_core pcspkr agpgart shpchp pci_hotplug ext3 jbd mbcache sg sd_mod floppy pcnet32 mptspi mptscsih mptbase mii pata_acpi ata_generic scsi_transport_spi ata_piix libata scsi_mod raid10 raid456 async_xor async_memcpy async_tx xor raid1 raid0 multipath linear md_mod dm_mirror dm_snapshot dm_mod thermal processor fan fbcon tileblit font bitblit softcursor fuse vmxnet
Oct 24 14:05:03 qye-cms kernel: [184413.686686]
Oct 24 14:05:03 qye-cms kernel: [184413.686773] Pid: 3770, comm: iscsid Not tainted (2.6.24-24-generic #1)
Oct 24 14:05:03 qye-cms kernel: [184413.686850] EIP: 0060:[<e08a212a>] EFLAGS: 00010202 CPU: 0
Oct 24 14:05:03 qye-cms kernel: [184413.725583] EIP is at spi_device_match+0x1a/0x60 [scsi_transport_spi]
Oct 24 14:05:03 qye-cms kernel: [184413.725680] EAX: 00000000 EBX: df1c0cb0 ECX: df1c0c00 EDX: df1c0cb0
Oct 24 14:05:03 qye-cms kernel: [184413.725766] ESI: df1c0cb0 EDI: dfbd8a00 EBP: c0286000 ESP: deaf3b8c
Oct 24 14:05:03 qye-cms kernel: [184413.727201]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Oct 24 14:05:03 qye-cms kernel: [184413.727287] Process iscsid (pid: 3770, ti=deaf2000 task=dda1e5c0 task.ti=deaf2000)
Oct 24 14:05:03 qye-cms kernel: [184413.727370] Stack: e08a7c90 c0285c8f e095e328 df1c0dd8 de1ee030 df1c0c00 df1c0cb0 dfbd8a00
Oct 24 14:05:03 qye-cms kernel: [184413.727532]        00000202 e09449cd df1c0c00 de1ee030 e0944a2f df1c0c00 de1ee000 e0944acc
Oct 24 14:05:03 qye-cms kernel: [184413.727650]        dfbd8a14 de1ee8a4 e0944b50 00000000 e0944b64 00000000 c02805c2 de1ee8a4
Oct 24 14:05:03 qye-cms kernel: [184413.727770] Call Trace:
Oct 24 14:05:03 qye-cms kernel: [184413.727961]  [<c0285c8f>] attribute_container_device_trigger+0x4f/0xb0
Oct 24 14:05:03 qye-cms kernel: [184413.728262]  [<e09449cd>] __scsi_remove_device+0x3d/0x80 [scsi_mod]
Oct 24 14:05:03 qye-cms kernel: [184413.747281]  [<e0944a2f>] scsi_remove_device+0x1f/0x30 [scsi_mod]
Oct 24 14:05:03 qye-cms kernel: [184413.747364]  [<e0944acc>] __scsi_remove_target+0x8c/0xc0 [scsi_mod]
Oct 24 14:05:03 qye-cms kernel: [184413.747443]  [<e0944b50>] __remove_child+0x0/0x20 [scsi_mod]
Oct 24 14:05:03 qye-cms kernel: [184413.747523]  [<e0944b64>] __remove_child+0x14/0x20 [scsi_mod]
Oct 24 14:05:03 qye-cms kernel: [184413.747599]  [<c02805c2>] device_for_each_child+0x22/0x40
Oct 24 14:05:03 qye-cms kernel: [184413.747684]  [<e0944b3e>] scsi_remove_target+0x3e/0x50 [scsi_mod]
Oct 24 14:05:03 qye-cms kernel: [184413.747766]  [<e0a9185c>] __iscsi_unbind_session+0x6c/0xa0 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.747910]  [<e0a91948>] iscsi_remove_session+0xb8/0x120 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.748020]  [<e0a9bac6>] iscsi_session_teardown+0x26/0x80 [libiscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804030]  [<e0a9baa0>] iscsi_session_teardown+0x0/0x80 [libiscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804104]  [<e0a919b8>] iscsi_destroy_session+0x8/0x20 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804217]  [<e0a9bb05>] iscsi_session_teardown+0x65/0x80 [libiscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804291]  [<e0a9baa0>] iscsi_session_teardown+0x0/0x80 [libiscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804362]  [<e0a90030>] iscsi_iter_session_fn+0x0/0x30 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804484]  [<e0a9004f>] iscsi_iter_session_fn+0x1f/0x30 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804596]  [<c02805c2>] device_for_each_child+0x22/0x40
Oct 24 14:05:03 qye-cms kernel: [184413.804667]  [<e0a906f0>] iscsi_if_rx+0x0/0x860 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804740]  [<e0a9bb2d>] iscsi_host_remove+0xd/0x20 [libiscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.804813]  [<e0aa6324>] iscsi_tcp_session_destroy+0x34/0x50 [iscsi_tcp]
Oct 24 14:05:03 qye-cms kernel: [184413.804935]  [<e0a90ec4>] iscsi_if_rx+0x7d4/0x860 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.805011]  [<c018d13d>] __slab_free+0x16d/0x2a0
Oct 24 14:05:03 qye-cms kernel: [184413.805133]  [<e0a90714>] iscsi_if_rx+0x24/0x860 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.805204]  [<c02a3a98>] __kfree_skb+0x8/0x80
Oct 24 14:05:03 qye-cms kernel: [184413.805299]  [<e0a906f0>] iscsi_if_rx+0x0/0x860 [scsi_transport_iscsi]
Oct 24 14:05:03 qye-cms kernel: [184413.805380]  [<c02c282d>] netlink_unicast+0x1dd/0x210
Oct 24 14:05:03 qye-cms kernel: [184413.805457]  [<c021aeee>] copy_from_user+0x2e/0x70
Oct 24 14:05:03 qye-cms kernel: [184413.805574]  [<c02c30a6>] netlink_sendmsg+0x226/0x2f0
Oct 24 14:05:03 qye-cms kernel: [184413.805644]  [<c029dc51>] sock_sendmsg+0x111/0x130
Oct 24 14:05:03 qye-cms kernel: [184413.805709]  [<c0140c20>] autoremove_wake_function+0x0/0x40
Oct 24 14:05:03 qye-cms kernel: [184413.805807]  [<c0140000>] sys_timer_create+0x2c0/0x330
Oct 24 14:05:03 qye-cms kernel: [184413.805885]  [<c0199457>] do_lookup+0x67/0x1c0
Oct 24 14:05:03 qye-cms kernel: [184413.805967]  [<c019b87b>] __link_path_walk+0xaab/0xe10
Oct 24 14:05:03 qye-cms kernel: [184413.806034]  [<c021aeee>] copy_from_user+0x2e/0x70
Oct 24 14:05:03 qye-cms kernel: [184413.806097]  [<c021aeee>] copy_from_user+0x2e/0x70
Oct 24 14:05:03 qye-cms kernel: [184413.806160]  [<c029ddc9>] sys_sendmsg+0x159/0x270
Oct 24 14:05:03 qye-cms kernel: [184413.806225]  [<c029ec4d>] sys_recvmsg+0x17d/0x230
Oct 24 14:05:03 qye-cms kernel: [184413.806289]  [<c01a2ffd>] d_kill+0x3d/0x60
Oct 24 14:05:03 qye-cms kernel: [184413.806378]  [<c01a2ffd>] d_kill+0x3d/0x60
Oct 24 14:05:03 qye-cms kernel: [184413.806440]  [<c019abca>] getname+0xaa/0xe0
Oct 24 14:05:03 qye-cms kernel: [184413.806498]  [<c021b170>] copy_to_user+0x30/0x60
Oct 24 14:05:03 qye-cms kernel: [184413.806559]  [<c0194f59>] cp_new_stat64+0xf9/0x110
Oct 24 14:05:03 qye-cms kernel: [184413.806628]  [<c029f334>] sys_socketcall+0xb4/0x2b0
Oct 24 14:05:03 qye-cms kernel: [184413.806695]  [<c01043b2>] sysenter_past_esp+0x6b/0xa9
Oct 24 14:05:03 qye-cms kernel: [184413.806840]  =======================
Oct 24 14:05:03 qye-cms kernel: [184413.806908] Code: 08 88 50 07 b8 08 00 00 00 c3 8d b4 26 00 00 00 00 53 89 d0 89 d3 e8 b6 1b 0a 00 85 c0 74 1c 8b 83 50 ff ff ff 8d 8b 50 ff ff ff <8b> 40 60 85 c0 74 09 81 78 1c c0 7c 8a e0 74 06 31 c0 5b c3 66
Oct 24 14:05:03 qye-cms kernel: [184413.807225] EIP: [<e08a212a>] spi_device_match+0x1a/0x60 [scsi_transport_spi] SS:ESP 0068:deaf3b8c
Oct 24 14:05:03 qye-cms kernel: [184413.807764] ---[ end trace 756dbf4d8889f5b8 ]---
Oct 24 14:05:03 qye-cms kernel: [184413.851184] sd 55415:0:0:91: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
Oct 24 14:05:03 qye-cms kernel: [184413.851329] end_request: I/O error, dev sdb, sector 0
Oct 24 14:05:03 qye-cms kernel: [184413.851395] Buffer I/O error on device sdb, logical block 0
Oct 24 14:05:03 qye-cms kernel: [184413.851465] Buffer I/O error on device sdb, logical block 1
Oct 24 14:05:03 qye-cms kernel: [184413.851531] Buffer I/O error on device sdb, logical block 2
Oct 24 14:05:03 qye-cms kernel: [184413.851597] Buffer I/O error on device sdb, logical block 3
Oct 24 14:05:03 qye-cms kernel: [184413.851718] sd 55415:0:0:91: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
Oct 24 14:05:03 qye-cms kernel: [184413.851845] end_request: I/O error, dev sdb, sector 0
Oct 24 14:05:03 qye-cms kernel: [184413.851909] Buffer I/O error on device sdb, logical block 0
Reply all
Reply to author
Forward
0 new messages