Open Access Control

Hi all, I'm not sure if I shared this or not. But here is the code that Maglabs wrote in Python:

Nice! John is part of the Hack Factory up here in Minneapolis too! -David From: "Arclight"

Sweet! Not really related, but I've recently made some great advancements in logging, to get

On the ACCX Products site, I see there is a new version available, version v4: Open Access v4 boards

Indeed, the password/cardnum/ip/mac config is already hard enough to version control. I just haven

Found my issue- Had this set to cmdString[4][9] to the right value.... I'll commit it soon. It

Good catch! Thanks! I'll be committing this tonight! -David From: "krux" <krux702@

On my github (zyphlar) I have a web interface that works with my Ethernet version of the oac code to

YES, thanks! On Wednesday, September 26, 2012 3:57:16 PM UTC-4, Arclight wrote: I can add you. Is

I'm totally in, assembled plz. ----- Original Message ----- From: "Arclight" <

Is that the board you showed Will and I the last time you were visiting HSL? I'm pretty

Also, in response to a couple of additional requests: 1. Will - I looked into your problem and

Hi guys, Since a few people have been asking, I created a sample wiring diagram for Open Access v2.11

Perl or python API? -- David MN Bryan 612-978-9765 On Mar 10, 2012, at 12:37 PM, Arclight <

#2 with 4 readers and status for each reader with pi would be great! -- David MN Bryan 612-978-9765

I'm using the Sheevaplug PC from Globalscale Technologies. I'm using msmtp to send out a tail

Hi guys, My commercial site Wiki has info on the tag output here: http://www.accxproducts.com/wiki/

I'm on my phone so pardon the vagueness, but I think the operative line in the OAC code is

So the new one uses all hardware interrupts. For the Mega 2560, this corresponds to pins 2,3,18,19

Hi guys, One of our members decided to open-source his video monitoring server software. This system

Hey all, our board was hanging by its last strand of electrical tape so I made a mounting bracket for

Hi guys, Since quite a few people have been asking where to buy the boards, readers, etc for the Open

Since y'all mentioned it, I hooked up my Wiegand Mifare reader, and confirmed that: 1. My bank

That would be epic, our thermostat blows and we could use a replacement and/or multi zone temperature

Hi all, I've added a section to the wiki that documents how to set up a remote access/monitoring

dosman I would love access to your code for SD card reading as we (Jigsaw Renaissance hackerspace in

Impressive!! Michael Hasse sent me this link to RFID-specific distro: Bootable RFID Live Hacking