error about Define_Module() etc

[Guoyong Guo]

Hi everyone:

    I had encounter a problem today which just describled as below .

     

     When I run the project , it tells me that "Error in module (cCompoundMoudule) NOP_SIMULATION.hostA (id =2) :Class "Source " not found----perhaps its code was not linked in,or the class wasn't registered with Register_Class(), or in the case of modules and channels, with Define_Module()/Define_Channel().".

     

     But,I had used the Define_Module()/ to define the simple module Source .And the .ned file can display the Source module.

     If everyone can fix this problem out ,communicating with me ,please ! Thank you very much !

[Judi]

hi Guo,
i have got the same problem, if you get an answer please let me know.
thanks in advance

[Guoyong Guo]

2010/4/4 Judi <judici...@gmail.com>

hi Guo,
i have got the same problem, if you get an answer please let me know.
thanks in advance

--
You received this message because you are subscribed to the Google Groups "omnetpp" group.
To post to this group, send email to omn...@googlegroups.com.
To unsubscribe from this group, send email to omnetpp+u...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/omnetpp?hl=en.

Hi:

   My problem was fixed out. Because the control message for the datalinker layer was wrong when I use the Inet framework , so , its(my modules) code was not linked in .

 

   good luck !