D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
The group you are posting to is a Usenet group. Messages posted to this group will make your email address visible to anyone on the Internet. Your reply message has not been sent.
Your post was successful
 |
From: Vladimir Pantelic <vlado...@gmail.com>Date: Thu, 25 Aug 2011 10:55:13 +0200
Local: Thurs, Aug 25 2011 4:55 am
Subject: Re: D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
Michael Shen wrote: > Hi, > I get this error when I run OMAP4 Camera. Does anyone know this
> error?
> The host is Ubuntu32. The software is L27.G.2. The hardware is
> OMAP4430 ES2.3 GP.
> The log is:
> I/ActivityManager( 1682): Starting: Intent
> { act=android.intent.action.MAIN
> cat=[android.intent.category.LAUNCHER] flg=0x10200000
> cmp=com.ti.omap4.android.camera/.Camera } from pid 1922
> I/ActivityManager( 1682): Start proc com.ti.omap4.android.camera for
> activity com.ti.omap4.android.camera/.Camera: pid=2227 uid=10032
> gids={1006, 1015}
> D/installd( 1585): DexInv: --- BEGIN '/system/app/CameraOMAP4.apk' ---
> D/dalvikvm( 2234): creating instr width table
> D/dalvikvm( 2234): DexOpt: load 20ms, verify+opt 122ms
> D/installd( 1585): DexInv: --- END '/system/app/
> CameraOMAP4.apk' (success) ---
> V/CameraHolder( 2227): open camera 0
> E/CameraHal( 1583): hardware/ti/omap3/camera-omap4/src/CameraHal.cpp:
> 2591 initialize - Sensor index 0
> D/camera ( 2227): Face Detection period calculated: 166 [ms.]
> D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
> D/SYSLINKD( 2242):
> D/SYSLINKD( 2242): Invalid arguments!
> D/SYSLINKD( 2242): Usage: ./syslink_daemon.out [-f]<[-s]<SysM3 image
> file>> [<[-a]<AppM3 image file>>]
> D/SYSLINKD( 2242): Rules: - Full paths must be provided for image
> files.
> D/SYSLINKD( 2242): - Use '-f' option to run as a regular
> process.
> D/SYSLINKD( 2242): - Images can be specified in any order as
> long as
> D/SYSLINKD( 2242): the corresponding option is specified.
> D/SYSLINKD( 2242): - All images not preceded by an option are
> applied
> D/SYSLINKD( 2242): to the cores whose images are not already
> D/SYSLINKD( 2242): specified in the order of SysM3, AppM3
> D/SYSLINKD( 2242):
> Best Regard,
> Michael Shen
and do you have /data/base_image_sys_m3.xem3?
You must Sign in before you can post messages. You do not have the permission required to post.
|
|
From: Michael Shen <mich...@ovt.com>Date: Thu, 25 Aug 2011 19:19:14 -0700 (PDT)
Local: Thurs, Aug 25 2011 10:19 pm
Subject: Re: D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
I have not the base_image_sys_m3.xem3. How to build this file?
On 8月25日, 下午4时55分, Vladimir Pantelic <vlado...@gmail.com> wrote:
> Michael Shen wrote:
> > Hi,
> > I get this error when I run OMAP4 Camera. Does anyone know this
> > error?
> > The host is Ubuntu32. The software is L27.G.2. The hardware is
> > OMAP4430 ES2.3 GP.
> > The log is:
> > I/ActivityManager( 1682): Starting: Intent
> > { act=android.intent.action.MAIN
> > cat=[android.intent.category.LAUNCHER] flg=0x10200000
> > cmp=com.ti.omap4.android.camera/.Camera } from pid 1922
> > I/ActivityManager( 1682): Start proc com.ti.omap4.android.camera for
> > activity com.ti.omap4.android.camera/.Camera: pid=2227 uid=10032
> > gids={1006, 1015}
> > D/installd( 1585): DexInv: --- BEGIN '/system/app/CameraOMAP4.apk' ---
> > D/dalvikvm( 2234): creating instr width table
> > D/dalvikvm( 2234): DexOpt: load 20ms, verify+opt 122ms
> > D/installd( 1585): DexInv: --- END '/system/app/
> > CameraOMAP4.apk' (success) ---
> > V/CameraHolder( 2227): open camera 0
> > E/CameraHal( 1583): hardware/ti/omap3/camera-omap4/src/CameraHal.cpp:
> > 2591 initialize - Sensor index 0
> > D/camera ( 2227): Face Detection period calculated: 166 [ms.]
> > D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
> > D/SYSLINKD( 2242):
> > D/SYSLINKD( 2242): Invalid arguments!
> > D/SYSLINKD( 2242): Usage: ./syslink_daemon.out [-f]<[-s]<SysM3 image
> > file>> [<[-a]<AppM3 image file>>]
> > D/SYSLINKD( 2242): Rules: - Full paths must be provided for image
> > files.
> > D/SYSLINKD( 2242): - Use '-f' option to run as a regular
> > process.
> > D/SYSLINKD( 2242): - Images can be specified in any order as
> > long as
> > D/SYSLINKD( 2242): the corresponding option is specified.
> > D/SYSLINKD( 2242): - All images not preceded by an option are
> > applied
> > D/SYSLINKD( 2242): to the cores whose images are not already
> > D/SYSLINKD( 2242): specified in the order of SysM3, AppM3
> > D/SYSLINKD( 2242):
> > Best Regard,
> > Michael Shen
> and do you have /data/base_image_sys_m3.xem3?
You must Sign in before you can post messages. You do not have the permission required to post.
|
|
From: Vladimir Pantelic <vlado...@gmail.com>Date: Fri, 26 Aug 2011 07:25:01 +0200
Local: Fri, Aug 26 2011 1:25 am
Subject: Re: D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
Michael Shen wrote:
> I have not the base_image_sys_m3.xem3. How to build this file?
building that is complex, but it should have been part of the TI release to you.
> On 8月25日, 下午4时55分, Vladimir Pantelic<vlado...@gmail.com> wrote:
>> Michael Shen wrote:
>> > Hi,
>> > I get this error when I run OMAP4 Camera. Does anyone know this
>> > error?
>> > The host is Ubuntu32. The software is L27.G.2. The hardware is
>> > OMAP4430 ES2.3 GP.
>> > The log is:
>> > I/ActivityManager( 1682): Starting: Intent
>> > { act=android.intent.action.MAIN
>> > cat=[android.intent.category.LAUNCHER] flg=0x10200000
>> > cmp=com.ti.omap4.android.camera/.Camera } from pid 1922
>> > I/ActivityManager( 1682): Start proc com.ti.omap4.android.camera for
>> > activity com.ti.omap4.android.camera/.Camera: pid=2227 uid=10032
>> > gids={1006, 1015}
>> > D/installd( 1585): DexInv: --- BEGIN '/system/app/CameraOMAP4.apk' ---
>> > D/dalvikvm( 2234): creating instr width table
>> > D/dalvikvm( 2234): DexOpt: load 20ms, verify+opt 122ms
>> > D/installd( 1585): DexInv: --- END '/system/app/
>> > CameraOMAP4.apk' (success) ---
>> > V/CameraHolder( 2227): open camera 0
>> > E/CameraHal( 1583): hardware/ti/omap3/camera-omap4/src/CameraHal.cpp:
>> > 2591 initialize - Sensor index 0
>> > D/camera ( 2227): Face Detection period calculated: 166 [ms.]
>> > D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
>> > D/SYSLINKD( 2242):
>> > D/SYSLINKD( 2242): Invalid arguments!
>> > D/SYSLINKD( 2242): Usage: ./syslink_daemon.out [-f]<[-s]<SysM3 image
>> > file>> [<[-a]<AppM3 image file>>]
>> > D/SYSLINKD( 2242): Rules: - Full paths must be provided for image
>> > files.
>> > D/SYSLINKD( 2242): - Use '-f' option to run as a regular
>> > process.
>> > D/SYSLINKD( 2242): - Images can be specified in any order as
>> > long as
>> > D/SYSLINKD( 2242): the corresponding option is specified.
>> > D/SYSLINKD( 2242): - All images not preceded by an option are
>> > applied
>> > D/SYSLINKD( 2242): to the cores whose images are not already
>> > D/SYSLINKD( 2242): specified in the order of SysM3, AppM3
>> > D/SYSLINKD( 2242):
>> > Best Regard,
>> > Michael Shen
>> and do you have /data/base_image_sys_m3.xem3?
You must Sign in before you can post messages. You do not have the permission required to post.
|
|
From: Michael Shen <mich...@ovt.com>Date: Thu, 25 Aug 2011 23:20:31 -0700 (PDT)
Local: Fri, Aug 26 2011 2:20 am
Subject: Re: D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
Thanks. I'll double check first.
On 8月26日, 下午1时25分, Vladimir Pantelic <vlado...@gmail.com> wrote:
> Michael Shen wrote:
> > I have not the base_image_sys_m3.xem3. How to build this file?
> building that is complex, but it should have been part of the TI
> release to you.
> > On 8月25日, 下午4时55分, Vladimir Pantelic<vlado...@gmail.com> wrote:
> >> Michael Shen wrote:
> >> > Hi,
> >> > I get this error when I run OMAP4 Camera. Does anyone know this
> >> > error?
> >> > The host is Ubuntu32. The software is L27.G.2. The hardware is
> >> > OMAP4430 ES2.3 GP.
> >> > The log is:
> >> > I/ActivityManager( 1682): Starting: Intent
> >> > { act=android.intent.action.MAIN
> >> > cat=[android.intent.category.LAUNCHER] flg=0x10200000
> >> > cmp=com.ti.omap4.android.camera/.Camera } from pid 1922
> >> > I/ActivityManager( 1682): Start proc com.ti.omap4.android.camera for
> >> > activity com.ti.omap4.android.camera/.Camera: pid=2227 uid=10032
> >> > gids={1006, 1015}
> >> > D/installd( 1585): DexInv: --- BEGIN '/system/app/CameraOMAP4.apk' ---
> >> > D/dalvikvm( 2234): creating instr width table
> >> > D/dalvikvm( 2234): DexOpt: load 20ms, verify+opt 122ms
> >> > D/installd( 1585): DexInv: --- END '/system/app/
> >> > CameraOMAP4.apk' (success) ---
> >> > V/CameraHolder( 2227): open camera 0
> >> > E/CameraHal( 1583): hardware/ti/omap3/camera-omap4/src/CameraHal.cpp:
> >> > 2591 initialize - Sensor index 0
> >> > D/camera ( 2227): Face Detection period calculated: 166 [ms.]
> >> > D/SYSLINKD( 2242): Error opening /data/base_image_sys_m3.xem3
> >> > D/SYSLINKD( 2242):
> >> > D/SYSLINKD( 2242): Invalid arguments!
> >> > D/SYSLINKD( 2242): Usage: ./syslink_daemon.out [-f]<[-s]<SysM3 image
> >> > file>> [<[-a]<AppM3 image file>>]
> >> > D/SYSLINKD( 2242): Rules: - Full paths must be provided for image
> >> > files.
> >> > D/SYSLINKD( 2242): - Use '-f' option to run as a regular
> >> > process.
> >> > D/SYSLINKD( 2242): - Images can be specified in any order as
> >> > long as
> >> > D/SYSLINKD( 2242): the corresponding option is specified.
> >> > D/SYSLINKD( 2242): - All images not preceded by an option are
> >> > applied
> >> > D/SYSLINKD( 2242): to the cores whose images are not already
> >> > D/SYSLINKD( 2242): specified in the order of SysM3, AppM3
> >> > D/SYSLINKD( 2242):
> >> > Best Regard,
> >> > Michael Shen
> >> and do you have /data/base_image_sys_m3.xem3?
You must Sign in before you can post messages. You do not have the permission required to post.
|
|
|
