Groups
Sign in
Groups
ogs-users
Conversations
About
Send feedback
Help
ogs-users
Contact owners and managers
1–30 of 218
Welcome to the OGS developer mailing list
Mark all as read
Report group
0 selected
Lars Bilke
2
4/30/19
Migration of the OGS mailing lists to discourse.opengeosys.org
Dear all, I have set both mailing lists to read-only. See you on discourse.opengeosys.org! Regards,
unread,
Migration of the OGS mailing lists to discourse.opengeosys.org
Dear all, I have set both mailing lists to read-only. See you on discourse.opengeosys.org! Regards,
4/30/19
Thomas Kalbacher
, …
jens-olaf Delfs
3
3/15/19
OGS-CM-2019 | 26./27.03.2019
Hi Thomas, Ich habe hier in Kiel mal rumgefragt. Ich, Johannes, Janine, tilman und Sebastian haetten
unread,
OGS-CM-2019 | 26./27.03.2019
Hi Thomas, Ich habe hier in Kiel mal rumgefragt. Ich, Johannes, Janine, tilman und Sebastian haetten
3/15/19
Norberto Vera
, …
Norihiro Watanabe
9
2/14/19
Velocities very high
Hello Nori, following your suggestions I changed the parameters to calculate density and the results
unread,
Velocities very high
Hello Nori, following your suggestions I changed the parameters to calculate density and the results
2/14/19
qiang...@brown.edu
2/12/19
Why Data Explorer cannot convert XML geometry to ASCII?
Apart from failing to open *.gsp or *.gml file, Data explorer also cannot convert XML geometry file (
unread,
Why Data Explorer cannot convert XML geometry to ASCII?
Apart from failing to open *.gsp or *.gml file, Data explorer also cannot convert XML geometry file (
2/12/19
qiang...@brown.edu
2/12/19
Why Data Explorer cannot import *.gml or *.gsp file?
Dear ogs users, I am using Data Explorer to test the tutorial case in "OGS Tutorial
unread,
Why Data Explorer cannot import *.gml or *.gsp file?
Dear ogs users, I am using Data Explorer to test the tutorial case in "OGS Tutorial
2/12/19
qiang...@brown.edu
,
Lars Bilke
3
2/11/19
where can I get the tutorial case to practice the use of Data Explorer?
Hi, Lars. Thank you very much! Qiang On Monday, February 11, 2019 at 4:13:59 AM UTC-5, Lars Bilke
unread,
where can I get the tutorial case to practice the use of Data Explorer?
Hi, Lars. Thank you very much! Qiang On Monday, February 11, 2019 at 4:13:59 AM UTC-5, Lars Bilke
2/11/19
Vaya Putra
,
Mohammad Islam
2
1/23/19
compile file
https://www.opengeosys.org/docs/userguide/basics/introduction/ https://www.opengeosys.org/docs/
unread,
compile file
https://www.opengeosys.org/docs/userguide/basics/introduction/ https://www.opengeosys.org/docs/
1/23/19
Mohammad Islam
,
Wenqing Wang
6
1/11/19
Coupled Two phase flow (PS type) and Deformation flow
Dear Wenqing Wang, Thank you again. Regards, Mohammad
unread,
Coupled Two phase flow (PS type) and Deformation flow
Dear Wenqing Wang, Thank you again. Regards, Mohammad
1/11/19
Park Sunghyun
1/9/19
Having problem opening OGS
I am a new user of OGS and I just have downloaded "OSX-10.13-x64-de-utils.tar.gz" from the
unread,
Having problem opening OGS
I am a new user of OGS and I just have downloaded "OSX-10.13-x64-de-utils.tar.gz" from the
1/9/19
Mohammad Islam
,
Wenqing Wang
4
12/4/18
ogs5-benchmarks problem
Dear Wenqing Wang, Thank you again Regards, Mohammad
unread,
ogs5-benchmarks problem
Dear Wenqing Wang, Thank you again Regards, Mohammad
12/4/18
Mohammad Islam
,
Wenqing Wang
3
12/1/18
Incorporation of new constitutive model
Dear Wenqing Wang, Thank you. Regards, Mohammad On Thursday, 29 November 2018 04:11:04 UTC-5, Wenqing
unread,
Incorporation of new constitutive model
Dear Wenqing Wang, Thank you. Regards, Mohammad On Thursday, 29 November 2018 04:11:04 UTC-5, Wenqing
12/1/18
emiliano rodrigo sosa massaro
11/14/18
Question about OGS # Phreeqc in a 3D model
Dear Users of OGS, my name is Emiliano Sosa Massaro, nowadays I am trying to use the OGS # Phreeqc to
unread,
Question about OGS # Phreeqc in a 3D model
Dear Users of OGS, my name is Emiliano Sosa Massaro, nowadays I am trying to use the OGS # Phreeqc to
11/14/18
Anneke Döring
,
Mohammad Islam
2
10/29/18
Fwd: Fwd: error message: could not initialize process pointer
Please check $RELOAD key word in rf_psc.cpp. Does it support RICHARDS_FLOW or DEFORMATION? In my
unread,
Fwd: Fwd: error message: could not initialize process pointer
Please check $RELOAD key word in rf_psc.cpp. Does it support RICHARDS_FLOW or DEFORMATION? In my
10/29/18
Norberto Vera
,
Mohammad Islam
5
10/5/18
Table for state equations
You are very kind Mohammad. Thanks for your help and your time. Best regards Norberto C. Vera Guzmán
unread,
Table for state equations
You are very kind Mohammad. Thanks for your help and your time. Best regards Norberto C. Vera Guzmán
10/5/18
fei...@ansys.com
10/1/18
CAMWA special issue on open-source numerical solver
Dear ogs community, Computers & Mathematics with Applications (Elsevier, current impact factor
unread,
CAMWA special issue on open-source numerical solver
Dear ogs community, Computers & Mathematics with Applications (Elsevier, current impact factor
10/1/18
Mohammad Islam
,
Chan-Hee Park
2
9/16/18
About Typo_Two Phase consolidation
Yes, there should be a Typo. The saturation of the water part in the red-circled zone should be out.
unread,
About Typo_Two Phase consolidation
Yes, there should be a Typo. The saturation of the water part in the red-circled zone should be out.
9/16/18
Lorenzo Campoli
,
Mohammad Islam
2
9/14/18
Buckley–Leverett equations
Yes, it is available. You will find two types solutions: PP and PS. Please see the attachment. ...\
unread,
Buckley–Leverett equations
Yes, it is available. You will find two types solutions: PP and PS. Please see the attachment. ...\
9/14/18
Eric Lappala
9/9/18
Installation of OGS 6.1 Data Explorer Error
I am trying to install the GUI for OGS 6.1 that is included in the latest source code from the GitHub
unread,
Installation of OGS 6.1 Data Explorer Error
I am trying to install the GUI for OGS 6.1 that is included in the latest source code from the GitHub
9/9/18
Inwoo
,
Lars Bilke
3
8/17/18
Problem with installation of the OGS6 with DataExplorer
Dear Bilke, I read your comments and install the ogs with conan usage. I works good. When I used the
unread,
Problem with installation of the OGS6 with DataExplorer
Dear Bilke, I read your comments and install the ogs with conan usage. I works good. When I used the
8/17/18
Johannes Boog
,
Wenqing Wang
2
8/8/18
ogs5.7.1_IPQC_ MPI -- PARALLEL on EVE -- ERROR
Sounds like a network connection problem. On 08/07/2018 12:43 PM, 'Johannes Boog' via ogs-
unread,
ogs5.7.1_IPQC_ MPI -- PARALLEL on EVE -- ERROR
Sounds like a network connection problem. On 08/07/2018 12:43 PM, 'Johannes Boog' via ogs-
8/8/18
akshay...@edengeopower.com
8/6/18
Installation of OGS
Hello All, I am trying to run the Windows 10 version of OpenGeoSys software. After extracting the
unread,
Installation of OGS
Hello All, I am trying to run the Windows 10 version of OpenGeoSys software. After extracting the
8/6/18
Eliana Medeiros Ferreira da Silva Gallo
, …
elianam...@gmail.com
5
7/30/18
Overland flow model doubts
Hello again. My overland flow model for a catchment, with more or less 60km2, located in high
unread,
Overland flow model doubts
Hello again. My overland flow model for a catchment, with more or less 60km2, located in high
7/30/18
Chan-Hee Park
, …
Joshua Taron
5
7/2/18
A simple question on M?
CH, It is, mostly, terminology. A neumann in displacement is traction. You are right though, most
unread,
A simple question on M?
CH, It is, mostly, terminology. A neumann in displacement is traction. You are right though, most
7/2/18
db00...@gmail.com
, …
Marc Walther
4
6/29/18
ogs6 beginners question
Thank you for your hints. It gets clearer and clearer :) But I have still two basic questions: 1)
unread,
ogs6 beginners question
Thank you for your hints. It gets clearer and clearer :) But I have still two basic questions: 1)
6/29/18
mka...@gmail.com
6/11/18
Detail of finite element/difference method application that is conversion of ground water Bousinesq equation to linear equations by using any transformation method and finding of eigin values and whole solution
Detail of finite element/difference method application that is conversion of ground water Bousinesq
unread,
Detail of finite element/difference method application that is conversion of ground water Bousinesq equation to linear equations by using any transformation method and finding of eigin values and whole solution
Detail of finite element/difference method application that is conversion of ground water Bousinesq
6/11/18
Mohammad Islam
,
Wenqing Wang
5
6/7/18
Is it bug?
Dear Wenqing, Thank you very much. Regards, Mohammad ---
unread,
Is it bug?
Dear Wenqing, Thank you very much. Regards, Mohammad ---
6/7/18
Sakiur Rahman
,
Mohammad Islam
2
6/4/18
beginners
Please see links as follows https://github.com/ufz/ogs5-benchmarks_ref/tree/master/GROUNDWATER_FLOW
unread,
beginners
Please see links as follows https://github.com/ufz/ogs5-benchmarks_ref/tree/master/GROUNDWATER_FLOW
6/4/18
Graciela Herrera Zamarrón
,
Norihiro Watanabe
3
5/25/18
The heat pipe problem
Dear Nori, Than you very much. Regards, Graciela 2018-05-24 20:02 GMT-05:00 Norihiro Watanabe <
unread,
The heat pipe problem
Dear Nori, Than you very much. Regards, Graciela 2018-05-24 20:02 GMT-05:00 Norihiro Watanabe <
5/25/18
Leandra Drewes
,
Marc Walther
6
5/18/18
rising head while pumping (groundwater flow)
Oh, and also the .msh file is missing... Am Freitag, 18. Mai 2018 16:51:11 UTC+2 schrieb Marc Walther
unread,
rising head while pumping (groundwater flow)
Oh, and also the .msh file is missing... Am Freitag, 18. Mai 2018 16:51:11 UTC+2 schrieb Marc Walther
5/18/18
mr.zo...@gmail.com
5/12/18
Ya'll are the big nerd.
👌 LMAO Gotteem
unread,
Ya'll are the big nerd.
👌 LMAO Gotteem
5/12/18