Sheet Metal
3 views
Skip to first unread message
Johnathan
Apr 15, 2011, 10:59:27 AM4/15/11
to NYCResistor:Microcontrollers
Hey everyone :]
I need some advice.
I live out on Long Island in Riverhead and I'm looking for 2 matching
flat 1' x 1' pieces of steal for anodizing other metals. I've called
up six machine shops / sheet metal depots in my area and not one
picked up the phone. Would anyone have any ideas as to where I can get
the two pieces? There would have to be absolutely on curve to the
metal so I would not get any arcing or discoloration.
I need some advice.
I live out on Long Island in Riverhead and I'm looking for 2 matching
flat 1' x 1' pieces of steal for anodizing other metals. I've called
up six machine shops / sheet metal depots in my area and not one
picked up the phone. Would anyone have any ideas as to where I can get
the two pieces? There would have to be absolutely on curve to the
metal so I would not get any arcing or discoloration.
Steven Brower
Apr 15, 2011, 11:33:15 AM4/15/11
to nycresistormi...@googlegroups.com
| you can get steel from a place called Rapid Steel. They tend to deliver even in your small quantities. --- On Fri, 4/15/11, Johnathan <johnatha...@yahoo.com> wrote: |
|
Johnathan
Apr 15, 2011, 11:33:28 AM4/15/11
to NYCResistor:Microcontrollers
Scratch that. Thank you all for reading the last post.
The seventh place I called fabricated and is giving me the pieces for
free.
Destiny is calling. :D
The seventh place I called fabricated and is giving me the pieces for
free.
Destiny is calling. :D
joseph legros
Apr 15, 2011, 11:35:49 AM4/15/11
to NYC RESISTOR
if that's all you need, the big box stores (lowes / home depot) usually have some typical gauge small sheets like that.
-joseph
> Date: Fri, 15 Apr 2011 07:59:27 -0700
-joseph
> Date: Fri, 15 Apr 2011 07:59:27 -0700
> Subject: [NYCR:Microcontrollers] Sheet Metal
> --
> You received this message because you are subscribed to the Google Groups "NYCResistor:Microcontrollers" group.
> To post to this group, send email to nycresistormi...@googlegroups.com.
> You received this message because you are subscribed to the Google Groups "NYCResistor:Microcontrollers" group.
> To post to this group, send email to nycresistormi...@googlegroups.com.
> To unsubscribe from this group, send email to nycresistormicrocon...@googlegroups.com.
David Neff
Apr 15, 2011, 11:57:23 AM4/15/11
to nycresistormi...@googlegroups.com
McMaster Carr
all sorts of raw materials....
avail online,
David
--
David Neff Photography
email: ne...@davepix.com
Web: www.davepix.com
blog: www.davetakespictures.com/wordpress
212 243-1895
76 Richardson St Apt 8
Brooklyn NY 11211
David Neff Photography
email: ne...@davepix.com
Web: www.davepix.com
blog: www.davetakespictures.com/wordpress
212 243-1895
76 Richardson St Apt 8
Brooklyn NY 11211
Chris Brokaw
Apr 15, 2011, 9:11:46 PM4/15/11
to nycresistormi...@googlegroups.com, NYCResistor:Microcontrollers
Hi,
You can order pieces cut to size from discountsteel.com
-CB
Sent from my iPhone
On Apr 15, 2011, at 10:59 AM, Johnathan <johnatha...@yahoo.com>
wrote:
Reply all
Reply to author
Forward
0 new messages