This group is announcement-only. You cannot post messages because you are not a manager.
Description:
This is the official discussion group dedicated to the Netus G20 core module and FOX Board G20 linux embedded SBC designed by Acme Systems srl.
|
|
|
Issue "kernel does not support PPP filtering" - Further developments
|
| |
Dear friends and colleagues, as I promised I tried to collect some more data. The problem is still there, but the way it appears begins to circumscribe. As I mentioned on an earlier post, the essence of the problem is I get a message "kernel does not support PPP filtering" even if PPP filtering is enabled. The reasons it did happen were totally... more »
|
|
|
Issue: "kernel does not support PPP filtering"
|
| |
Hello! I have a problem with kernel configuration pertaining use of Telit GM862-GPS modem + /dev/ttyS5 and /dev/ttyS6 ports. Sure I'm doing something very wrong, but am not able to realize what. May someone help me, please? Here's what I've done. I downloaded the kernel source tree as explained in... more »
|
|
|
RS485 timing issue
|
| |
Dear All,
I’m trying to communicate with an RS485 device, using the daisy-10 RS485 module and programming in ansi C. I know that the data sent to the remote device are right since I tested them directly with a RS485-TCP converter.
The problem is that with the daisy -10 RS485 module, the communication is... more »
|
|
|
Help compiling kernel
|
| |
Hi there!
I've a g20...and it realy need an updated kernel...
I've done these steps:
1) make ARCH=arm menuconfig
2) set architecture to at91/foxboard
3) Disabled some drivers..VT6656 from stagin drivers, ZIO Motherboard USB
serial,SCSI OSD,LINE6,everything from sata/pata (they doesn't let me... more »
|
|
|
Cross compiling still an issue
|
| |
Hi, I'm running Lubuntu 12.04 and I've followed this article<[link]>of AcmeSystems (based on Ubuntu 12.04 but that shouldn't matter). That produces, however, wrong executables. Each and every time, I get a segmentation fault when compiling the app on Lubuntu and running it on the... more »
|
|
|
Internal error: Oops: 17 eib-common Kernel
|
| |
Hello, I have some problems with kernel objects. I get some driver from TU-Wien for driving a serial port as KNX/EIB interface. It is the bcu1driver-0.2.6.6.2.([link]) On my Ubuntu 12.04 it is no Problem to make a the 3 ko's for it and load them with insmod to the kernel. And it works.... more »
|
|
|
apt-get update lock pb
|
| |
I've just created a new SDCARD following : [link] now when i try to install the dongle wifi [link] but when i do apt-update i get : W: Not using locking for read only lock file /var/lib/apt/lists/lock W: Failed to fetch [link]... more »
|
|
|
cant set essid on r8712u wifi device
|
| |
I have followed the instructions at [link] The device is installed OK: dmesg: r8712u: DriverVersion: v7_0.20100831 r8712u: register rtl8712_netdev_ops to netdev_ops r8712u: USB_SPEED_LOW with 4 endpoints r8712u: Boot from EFUSE: Autoload OK r8712u: CustomerID = 0x0000 r8712u: MAC Address from efuse = 85:62:9e:ad:00:0b... more »
|
|
|
Fox wont boot after upgrade
|
| |
I upgraded our fox to Debian Wheezy following the instructions here: [link] Now it wont boot. Well it may be booting, but I cant access it. I dont have a debug port interface. I only use the Ethernet. It doesnt seem to be getting an IP via DHCP. Before the upgrade it was... more »
|
|
|
Industrial SLC microSD cards
|
| |
Hello, I'm experiencing card failures on my devices. I tweaked Linux cache settings and all applications to generate less writes and fsync calls and it helped much, but after year of work cards are failing again. So I decided to use Industrial grade SLC cards. ATP cards ([link]) looks good, but I'm not sure... more »
|
|
|
