> For battery tests, here's a stripped down autoexec for 60D only. It does > not start any tasks or do anything CPU-intensive; it only polls battery > level every second, and display the same info as the big one.
> This is useful for measuring power draw of standard firmware.
> When the display is off, this autoexec may stop working (because the camera > may enter in powersave mode, where the CPU is paused). So, for photo mode, > we need to use pen and paper :)
> Keep in mind that battery percentage may vary in a nonlinear way, so > probably a good way to compare numbers is to take one reading with full ML, > another reading with stripped-down autoexec, another one with full ML and > another one with the stripped-down one.
> On Wed, Nov 23, 2011 at 11:17 PM, Alex <broscutama...@gmail.com> wrote: > > I'm not yet sure what causes this problem, so I'll prepare some test > > programs.
> > Meanwhile, I've fixed the small redraw issues with cropmarks and REC > > picstyle, and with audio meters.
> > For 60D users I have something new: in Debug menu you can see a battery > > indicator which also tells you how much time it will last and how fast the > > battery is draining. Would be interesting to see a few numbers. I didn't do > > any accuracy tests (my battery seems to show 30%/hour with globaldraw off > > and 32%/hour with zebras and focus peaking active).
> > How it works: it looks at the clock whenever battery percentage decreases > > by one unit, and computes the derivative. So, to get a good reading, wait > > for a few minutes until battery level decreases by 2% (to catch two > > transitions).
> > This autoexec was only tested on 60D and 550D.
> > On Wed, Nov 23, 2011 at 12:36 AM, Andy P <a...@djpulser.com> wrote:
> >> Just did a quick test and Magic Zoom is back and working. There is a > >> slight, occasional flicker but I can live with that. Must be the > >> optimization flag :)))
> >> To post to this group, send email to ml-devel@googlegroups.com > >> To unsubscribe from this group, send email to > >> ml-devel+unsubscribe@googlegroups.com > >> For more options, visit this group at > >>http://groups.google.com/group/ml-devel?hl=en
Sorry Alex i dont know what happened but with this last autoexec.bin camera wont' start at all if I take the card off, camera will start normally
________________________________ Da: Alex <broscutama...@gmail.com> A: ml-devel@googlegroups.com Inviato: Mercoledì 23 Novembre 2011 21:54 Oggetto: Re: [ML] Re: Unified Magic Lantern - new release (now with 50D and 500D)
For battery tests, here's a stripped down autoexec for 60D only. It does not start any tasks or do anything CPU-intensive; it only polls battery level every second, and display the same info as the big one.
This is useful for measuring power draw of standard firmware.
When the display is off, this autoexec may stop working (because the camera may enter in powersave mode, where the CPU is paused). So, for photo mode, we need to use pen and paper :)
Keep in mind that battery percentage may vary in a nonlinear way, so probably a good way to compare numbers is to take one reading with full ML, another reading with stripped-down autoexec, another one with full ML and another one with the stripped-down one.
-- Magic Lantern needs you
On Wed, Nov 23, 2011 at 11:17 PM, Alex <broscutama...@gmail.com> wrote:
I'm not yet sure what causes this problem, so I'll prepare some test programs.
>Meanwhile, I've fixed the small redraw issues with cropmarks and REC picstyle, and with audio meters.
>For 60D users I have something new: in Debug menu you can see a battery indicator which also tells you how much time it will last and how fast the battery is draining. Would be interesting to see a few numbers. I didn't do any accuracy tests (my battery seems to show 30%/hour with globaldraw off and 32%/hour with zebras and focus peaking active).
>How it works: it looks at the clock whenever battery percentage decreases by one unit, and computes the derivative. So, to get a good reading, wait for a few minutes until battery level decreases by 2% (to catch two transitions).
>This autoexec was only tested on 60D and 550D.
>-- >Magic Lantern needs you
>On Wed, Nov 23, 2011 at 12:36 AM, Andy P <a...@djpulser.com> wrote:
>Just did a quick test and Magic Zoom is back and working. There is a slight, occasional flicker but I can live with that. Must be the optimization flag :)))
To post to this group, send email to ml-devel@googlegroups.com To unsubscribe from this group, send email to ml-devel+unsubscribe@googlegroups.com For more options, visit this group at http://groups.google.com/group/ml-devel?hl=en
On Thu, Nov 24, 2011 at 5:26 PM, cristian paradiso <guit...@yahoo.it> wrote: > Sorry Alex i dont know what happened but with this last autoexec.bin > camera wont' start at all if I take the card off, camera will start normally
> ------------------------------ > *Da:* Alex <broscutama...@gmail.com> > *A:* ml-devel@googlegroups.com > *Inviato:* Mercoledì 23 Novembre 2011 21:54 > *Oggetto:* Re: [ML] Re: Unified Magic Lantern - new release (now with 50D > and 500D)
> For battery tests, here's a stripped down autoexec for 60D only. It does > not start any tasks or do anything CPU-intensive; it only polls battery > level every second, and display the same info as the big one.
> This is useful for measuring power draw of standard firmware.
> When the display is off, this autoexec may stop working (because the > camera may enter in powersave mode, where the CPU is paused). So, for photo > mode, we need to use pen and paper :)
> Keep in mind that battery percentage may vary in a nonlinear way, so > probably a good way to compare numbers is to take one reading with full ML, > another reading with stripped-down autoexec, another one with full ML and > another one with the stripped-down one.
> On Wed, Nov 23, 2011 at 11:17 PM, Alex <broscutama...@gmail.com> wrote:
> I'm not yet sure what causes this problem, so I'll prepare some test > programs.
> Meanwhile, I've fixed the small redraw issues with cropmarks and REC > picstyle, and with audio meters.
> For 60D users I have something new: in Debug menu you can see a battery > indicator which also tells you how much time it will last and how fast the > battery is draining. Would be interesting to see a few numbers. I didn't do > any accuracy tests (my battery seems to show 30%/hour with globaldraw off > and 32%/hour with zebras and focus peaking active).
> How it works: it looks at the clock whenever battery percentage decreases > by one unit, and computes the derivative. So, to get a good reading, wait > for a few minutes until battery level decreases by 2% (to catch two > transitions).
> On Wed, Nov 23, 2011 at 12:36 AM, Andy P <a...@djpulser.com> wrote:
> Just did a quick test and Magic Zoom is back and working. There is a > slight, occasional flicker but I can live with that. Must be the > optimization flag :))) > -- > http://magiclantern.wikia.com/
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
ok right I didnt read that, I went back to the previous one and it worked on my canon 550d :)
________________________________ Da: Alex <broscutama...@gmail.com> A: ml-devel@googlegroups.com Inviato: Giovedì 24 Novembre 2011 15:33 Oggetto: Re: [ML] Re: Unified Magic Lantern - new release (now with 50D and 500D)
... the one marked as "for 60D only" ?
On Thu, Nov 24, 2011 at 5:26 PM, cristian paradiso <guit...@yahoo.it> wrote:
Sorry Alex i dont know what happened but with this last autoexec.bin camera wont' start at all if I take the card off, camera will start normally
>________________________________ > Da: Alex <broscutama...@gmail.com> >A: ml-devel@googlegroups.com >Inviato: Mercoledì 23 Novembre 2011 21:54 >Oggetto: Re: [ML] Re: Unified Magic Lantern - new release (now with 50D and 500D)
>For battery tests, here's a stripped down autoexec for 60D only. It does not start any tasks or do anything CPU-intensive; it only polls battery level every second, and display the same info as the big one.
>This is useful for measuring power draw of standard firmware.
>When the display is off, this autoexec may stop working (because the camera may enter in powersave mode, where the CPU is paused). So, for photo mode, we need to use pen and paper :)
>Keep in mind that battery percentage may vary in a nonlinear way, so probably a good way to compare numbers is to take one reading with full ML, another reading with stripped-down autoexec, another one with full ML and another one with the stripped-down one.
>-- >Magic Lantern needs you
>On Wed, Nov 23, 2011 at 11:17 PM, Alex <broscutama...@gmail.com> wrote:
>I'm not yet sure what causes this problem, so I'll prepare some test programs.
>>Meanwhile, I've fixed the small redraw issues with cropmarks and REC picstyle, and with audio meters.
>>For 60D users I have something new: in Debug menu you can see a battery indicator which also tells you how much time it will last and how fast the battery is draining. Would be interesting to see a few numbers. I didn't do any accuracy tests (my battery seems to show 30%/hour with globaldraw off and 32%/hour with zebras and focus peaking active).
>>How it works: it looks at the clock whenever battery percentage decreases by one unit, and computes the derivative. So, to get a good reading, wait for a few minutes until battery level decreases by 2% (to catch two transitions).
>>This autoexec was only tested on 60D and 550D.
>>-- >>Magic Lantern needs you
>>On Wed, Nov 23, 2011 at 12:36 AM, Andy P <a...@djpulser.com> wrote:
>>Just did a quick test and Magic Zoom is back and working. There is a slight, occasional flicker but I can live with that. Must be the optimization flag :)))
To post to this group, send email to ml-devel@googlegroups.com To unsubscribe from this group, send email to ml-devel+unsubscribe@googlegroups.com For more options, visit this group at http://groups.google.com/group/ml-devel?hl=en
This is enabled on all other cameras, where it also enables aperture control in 1/8 EV steps. ML doesn't display the exact values, but you can hear them :)
Other changes: - Green screen feature ported from AJ, disguised as a false color preset - New menu named "Display" (just re-arranged the menus a bit)
On Thu, Nov 24, 2011 at 5:37 PM, cristian paradiso <guit...@yahoo.it> wrote: > ok right I didnt read that, I went back to the previous one and it worked > on my canon 550d :)
> ------------------------------ > *Da:* Alex <broscutama...@gmail.com> > *A:* ml-devel@googlegroups.com > *Inviato:* Giovedì 24 Novembre 2011 15:33
> *Oggetto:* Re: [ML] Re: Unified Magic Lantern - new release (now with 50D > and 500D)
> ... the one marked as "for 60D only" ?
> On Thu, Nov 24, 2011 at 5:26 PM, cristian paradiso <guit...@yahoo.it>wrote:
> Sorry Alex i dont know what happened but with this last autoexec.bin > camera wont' start at all if I take the card off, camera will start normally
> ------------------------------ > *Da:* Alex <broscutama...@gmail.com> > *A:* ml-devel@googlegroups.com > *Inviato:* Mercoledì 23 Novembre 2011 21:54 > *Oggetto:* Re: [ML] Re: Unified Magic Lantern - new release (now with 50D > and 500D)
> For battery tests, here's a stripped down autoexec for 60D only. It does > not start any tasks or do anything CPU-intensive; it only polls battery > level every second, and display the same info as the big one.
> This is useful for measuring power draw of standard firmware.
> When the display is off, this autoexec may stop working (because the > camera may enter in powersave mode, where the CPU is paused). So, for photo > mode, we need to use pen and paper :)
> Keep in mind that battery percentage may vary in a nonlinear way, so > probably a good way to compare numbers is to take one reading with full ML, > another reading with stripped-down autoexec, another one with full ML and > another one with the stripped-down one.
> On Wed, Nov 23, 2011 at 11:17 PM, Alex <broscutama...@gmail.com> wrote:
> I'm not yet sure what causes this problem, so I'll prepare some test > programs.
> Meanwhile, I've fixed the small redraw issues with cropmarks and REC > picstyle, and with audio meters.
> For 60D users I have something new: in Debug menu you can see a battery > indicator which also tells you how much time it will last and how fast the > battery is draining. Would be interesting to see a few numbers. I didn't do > any accuracy tests (my battery seems to show 30%/hour with globaldraw off > and 32%/hour with zebras and focus peaking active).
> How it works: it looks at the clock whenever battery percentage decreases > by one unit, and computes the derivative. So, to get a good reading, wait > for a few minutes until battery level decreases by 2% (to catch two > transitions).
> On Wed, Nov 23, 2011 at 12:36 AM, Andy P <a...@djpulser.com> wrote:
> Just did a quick test and Magic Zoom is back and working. There is a > slight, occasional flicker but I can live with that. Must be the > optimization flag :))) > -- > http://magiclantern.wikia.com/
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> This is enabled on all other cameras, where it also enables aperture > control in 1/8 EV steps. ML doesn't display the exact values, but you can > hear them :)
> Other changes: > - Green screen feature ported from AJ, disguised as a false color preset > - New menu named "Display" (just re-arranged the menus a bit)
> On Thu, Nov 24, 2011 at 5:37 PM, cristian paradiso <guit...@yahoo.it> wrote: > > ok right I didnt read that, I went back to the previous one and it worked > > on my canon 550d :)
> > ------------------------------ > > *Da:* Alex <broscutama...@gmail.com> > > *A:* ml-devel@googlegroups.com > > *Inviato:* Giovedì 24 Novembre 2011 15:33
> > *Oggetto:* Re: [ML] Re: Unified Magic Lantern - new release (now with 50D > > and 500D)
> > ... the one marked as "for 60D only" ?
> > On Thu, Nov 24, 2011 at 5:26 PM, cristian paradiso <guit...@yahoo.it>wrote:
> > Sorry Alex i dont know what happened but with this last autoexec.bin > > camera wont' start at all if I take the card off, camera will start normally
> > ------------------------------ > > *Da:* Alex <broscutama...@gmail.com> > > *A:* ml-devel@googlegroups.com > > *Inviato:* Mercoledì 23 Novembre 2011 21:54 > > *Oggetto:* Re: [ML] Re: Unified Magic Lantern - new release (now with 50D > > and 500D)
> > For battery tests, here's a stripped down autoexec for 60D only. It does > > not start any tasks or do anything CPU-intensive; it only polls battery > > level every second, and display the same info as the big one.
> > This is useful for measuring power draw of standard firmware.
> > When the display is off, this autoexec may stop working (because the > > camera may enter in powersave mode, where the CPU is paused). So, for photo > > mode, we need to use pen and paper :)
> > Keep in mind that battery percentage may vary in a nonlinear way, so > > probably a good way to compare numbers is to take one reading with full ML, > > another reading with stripped-down autoexec, another one with full ML and > > another one with the stripped-down one.
> > On Wed, Nov 23, 2011 at 11:17 PM, Alex <broscutama...@gmail.com> wrote:
> > I'm not yet sure what causes this problem, so I'll prepare some test > > programs.
> > Meanwhile, I've fixed the small redraw issues with cropmarks and REC > > picstyle, and with audio meters.
> > For 60D users I have something new: in Debug menu you can see a battery > > indicator which also tells you how much time it will last and how fast the > > battery is draining. Would be interesting to see a few numbers. I didn't do > > any accuracy tests (my battery seems to show 30%/hour with globaldraw off > > and 32%/hour with zebras and focus peaking active).
> > How it works: it looks at the clock whenever battery percentage decreases > > by one unit, and computes the derivative. So, to get a good reading, wait > > for a few minutes until battery level decreases by 2% (to catch two > > transitions).
> > This autoexec was only tested on 60D and 550D.
> > On Wed, Nov 23, 2011 at 12:36 AM, Andy P <a...@djpulser.com> wrote:
> > Just did a quick test and Magic Zoom is back and working. There is a > > slight, occasional flicker but I can live with that. Must be the > > optimization flag :))) > > -- > >http://magiclantern.wikia.com/
> > To post to this group, send email to ml-devel@googlegroups.com > > To unsubscribe from this group, send email to > > ml-devel+unsubscribe@googlegroups.com > > For more options, visit this group at > >http://groups.google.com/group/ml-devel?hl=en
> > To post to this group, send email to ml-devel@googlegroups.com > > To unsubscribe from this group, send email to > > ml-devel+unsubscribe@googlegroups.com > > For more options, visit this group at > >http://groups.google.com/group/ml-devel?hl=en
> > To post to this group, send email to ml-devel@googlegroups.com > > To unsubscribe from this group, send email to > > ml-devel+unsubscribe@googlegroups.com > > For more options, visit this group at > >http://groups.google.com/group/ml-devel?hl=en
> > To post to this group, send email to ml-devel@googlegroups.com > > To unsubscribe from this group, send email to > > ml-devel+unsubscribe@googlegroups.com > > For more options, visit this group at > >http://groups.google.com/group/ml-devel?hl=en
> > To post to this group, send email to ml-devel@googlegroups.com > > To unsubscribe from this group, send email to > > ml-devel+unsubscribe@googlegroups.com > > For more options, visit this group at > >http://groups.google.com/group/ml-devel?hl=en
Thank you :) The next step would be controlling those values without going into ML menu, with wheels and maybe zoom buttons for the iso. Do you think it's possible? On my 50D aperture change looks a bit delayed, at least the numbers come a bit later than the actual selection.
> Thank you :) > The next step would be controlling those values without going into ML > menu, with wheels and maybe zoom buttons for the iso. > Do you think it's possible? > On my 50D aperture change looks a bit delayed, at least the numbers > come a bit later than the actual selection.
back when i was looking at the 50d firmware and saw that it had all of the video recording functions like the 500d (this was months before Alex actually implemented recording) I think I remember seeing it supports 480p and 1080p, IIRC. it's somewhere in the 50d thread on the chdk forum.
try changing the property for video_mode_resolution
On Nov 24, 3:07 pm, Giovanni Di Cello <giovannidice...@gmail.com> wrote:
Yes, i well remember that post :D I don't know a thing about coding, i'll wait for Alex :D It's strange that it lacks 720p, have you investigated what that dryos message was about?
Just tried it on my 50D. When I turned it on, the lower part of the default gui, there is like an icon that keeps on blinking. It didn't stop. It still doesn't go away if I go inside liveview then back to it again.
For the video quality, I tested it on low light, it is phenomenal!!! I'll post the vide shortly!!! :)
> This is enabled on all other cameras, where it also enables aperture > control in 1/8 EV steps. ML doesn't display the exact values, but you can > hear them :)
> Other changes: > - Green screen feature ported from AJ, disguised as a false color preset > - New menu named "Display" (just re-arranged the menus a bit)
> On Thu, Nov 24, 2011 at 5:37 PM, cristian paradiso <guit...@yahoo.it>wrote:
>> ok right I didnt read that, I went back to the previous one and it worked >> on my canon 550d :)
>> ------------------------------ >> *Da:* Alex <broscutama...@gmail.com> >> *A:* ml-devel@googlegroups.com >> *Inviato:* Giovedì 24 Novembre 2011 15:33
>> *Oggetto:* Re: [ML] Re: Unified Magic Lantern - new release (now with >> 50D and 500D)
>> ... the one marked as "for 60D only" ?
>> On Thu, Nov 24, 2011 at 5:26 PM, cristian paradiso <guit...@yahoo.it>wrote:
>> Sorry Alex i dont know what happened but with this last autoexec.bin >> camera wont' start at all if I take the card off, camera will start normally
>> ------------------------------ >> *Da:* Alex <broscutama...@gmail.com> >> *A:* ml-devel@googlegroups.com >> *Inviato:* Mercoledì 23 Novembre 2011 21:54 >> *Oggetto:* Re: [ML] Re: Unified Magic Lantern - new release (now with >> 50D and 500D)
>> For battery tests, here's a stripped down autoexec for 60D only. It does >> not start any tasks or do anything CPU-intensive; it only polls battery >> level every second, and display the same info as the big one.
>> This is useful for measuring power draw of standard firmware.
>> When the display is off, this autoexec may stop working (because the >> camera may enter in powersave mode, where the CPU is paused). So, for photo >> mode, we need to use pen and paper :)
>> Keep in mind that battery percentage may vary in a nonlinear way, so >> probably a good way to compare numbers is to take one reading with full ML, >> another reading with stripped-down autoexec, another one with full ML and >> another one with the stripped-down one.
>> On Wed, Nov 23, 2011 at 11:17 PM, Alex <broscutama...@gmail.com> wrote:
>> I'm not yet sure what causes this problem, so I'll prepare some test >> programs.
>> Meanwhile, I've fixed the small redraw issues with cropmarks and REC >> picstyle, and with audio meters.
>> For 60D users I have something new: in Debug menu you can see a battery >> indicator which also tells you how much time it will last and how fast the >> battery is draining. Would be interesting to see a few numbers. I didn't do >> any accuracy tests (my battery seems to show 30%/hour with globaldraw off >> and 32%/hour with zebras and focus peaking active).
>> How it works: it looks at the clock whenever battery percentage decreases >> by one unit, and computes the derivative. So, to get a good reading, wait >> for a few minutes until battery level decreases by 2% (to catch two >> transitions).
>> On Wed, Nov 23, 2011 at 12:36 AM, Andy P <a...@djpulser.com> wrote:
>> Just did a quick test and Magic Zoom is back and working. There is a >> slight, occasional flicker but I can live with that. Must be the >> optimization flag :))) >> -- >> http://magiclantern.wikia.com/
>> To post to this group, send email to ml-devel@googlegroups.com >> To unsubscribe from this group, send email to >> ml-devel+unsubscribe@googlegroups.com >> For more options, visit this group at >> http://groups.google.com/group/ml-devel?hl=en
>> To post to this group, send email to ml-devel@googlegroups.com >> To unsubscribe from this group, send email to >> ml-devel+unsubscribe@googlegroups.com >> For more options, visit this group at >> http://groups.google.com/group/ml-devel?hl=en
>> To post to this group, send email to ml-devel@googlegroups.com >> To unsubscribe from this group, send email to >> ml-devel+unsubscribe@googlegroups.com >> For more options, visit this group at >> http://groups.google.com/group/ml-devel?hl=en
>> To post to this group, send email to ml-devel@googlegroups.com >> To unsubscribe from this group, send email to >> ml-devel+unsubscribe@googlegroups.com >> For more options, visit this group at >> http://groups.google.com/group/ml-devel?hl=en
>> To post to this group, send email to ml-devel@googlegroups.com >> To unsubscribe from this group, send email to >> ml-devel+unsubscribe@googlegroups.com >> For more options, visit this group at >> http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
** It unlocks 1/25s shutter speed in movie mode on all cameras! (in 24p and 25p). **
I've tested it by looking at motion blur, and it's practically 360 degrees. This will improve low-light performance a bit (not much, only by 1/3 stops).
It also seems to unlock 1/8000 in 550D, ISO 12800 in movie mode on 60D and maybe a few others.
To use this, you need to enable Exposure Override (this time it's in Movie menu, at the bottom). It works by enabling a special debug mode in LiveView, where the camera ignores ISO, shutter and aperture changed from Canon buttons (scrollwheel etc) and also some of their limits. The values displayed by Canon graphics will be ignored completely (but ML displays the ones which are being used).
Today's update only brings a few minor changes (like moving the exposure override in Movie menu, marking this mode with a red rectangle in the bottom bar, and fixing some flicker on the bottom bar on HDMI).
It also enables 640x480 in 50D. It's a bit hidden, because it's something you shouldn't use... unless you still have a 486 computer :)
> Still, one of the misteries for me is about battery duration.
Let's wait for battery tests from the users... hopefully the 60D autoexec for running the tests was not downloaded only by Cristian :)
In my quick tests, the 60D draws about 5% more power with ML (with zebras and peaking active), compared to standard Canon firmware. My battery lasts for around 3 hours (according to ML indicator) in LiveView, with zebras, peaking and maximum LCD brightness.
giovannidice...@gmail.com> wrote: > Still, one of the misteries for me is about battery duration. I > haven't done a proper test but 2 BP-511A don't last even close to an > hour.
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
On Fri, Nov 25, 2011 at 7:26 PM, Malcolm Debono <mdebon...@gmail.com> wrote: > Cool features! :-) > ISO 12800 in movie mode works on the 60D, and is even accessible from the > Canon menu when pressing the ISO button!
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
On Fri, Nov 25, 2011 at 7:38 PM, Malcolm Debono <mdebon...@gmail.com> wrote: > Strange. > What button do I need to hold to boot the camera in vanilla mode? I > believe it was changed from the shutter button.
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
Ok thanks. I had tried using Set but wasn't working since I had it the button set to show the level indicator in the viewfinder (from custom functions). Had to disable it (default) in order to work.
On Fri, Nov 25, 2011 at 7:53 PM, Malcolm Debono <mdebon...@gmail.com> wrote: > This is totally strange. Apparently I can now set the ISO to H(12800) even > without ML!
> Am I missing something, or did I run into some sort of bug?
> Attached 2 photos while running without ML. Check out the ISO H in the > bottom bar, and the ISO H(12800) in the menu!
> To post to this group, send email to ml-devel@googlegroups.com > To unsubscribe from this group, send email to > ml-devel+unsubscribe@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/ml-devel?hl=en
