Some issue there, check it out on my videos
11 views
Skip to first unread message
cristian paradiso
Dec 21, 2010, 8:25:28 AM12/21/10
to Magic Lantern firmware development
Hi All, the ML it's wonderful but I want to point out few things. 1;
zebra issue. I have an external monitor and zebras are not working
properly pixel all around the screen with no sense, if I unplug the
monitor it goes normal on the camera screen( I had the previous
version the 0.1.9 and it was working fine) 2: when you take the
histogram off you still can see the gray box on the side as it is been
moved only all on the right but still there. this video shows those 2
things. last thing what is that percentage for? the one next to the
camera lens data? thanks. Anyway things look weird on an external
monitor some time gray lines are thicker sometime thinner etc..could
be my cheap monitor, I dont know if a dp6 hdsmall would do it as well.
anyone had tried with good monitors? My ext monitor will show the
image squeezed even without ML that could be a reason as well and it
is not connected hdmi
1;this video you can see an extra gray line on the top and only one
audio signal as the other one it's gone due to my monitor not centered
compared to the camera monitor
http://www.youtube.com/watch?v=JHKLFfRvVws
2: this is the histogram issue
http://www.youtube.com/watch?v=SmAdU6lTwMc
3: this is the most annoying to me zebras (it was working fine on
0.1.9 firmw)
http://www.youtube.com/watch?v=nN5gFXWWSqM
thanks I hope that help for a fix
zebra issue. I have an external monitor and zebras are not working
properly pixel all around the screen with no sense, if I unplug the
monitor it goes normal on the camera screen( I had the previous
version the 0.1.9 and it was working fine) 2: when you take the
histogram off you still can see the gray box on the side as it is been
moved only all on the right but still there. this video shows those 2
things. last thing what is that percentage for? the one next to the
camera lens data? thanks. Anyway things look weird on an external
monitor some time gray lines are thicker sometime thinner etc..could
be my cheap monitor, I dont know if a dp6 hdsmall would do it as well.
anyone had tried with good monitors? My ext monitor will show the
image squeezed even without ML that could be a reason as well and it
is not connected hdmi
1;this video you can see an extra gray line on the top and only one
audio signal as the other one it's gone due to my monitor not centered
compared to the camera monitor
http://www.youtube.com/watch?v=JHKLFfRvVws
2: this is the histogram issue
http://www.youtube.com/watch?v=SmAdU6lTwMc
3: this is the most annoying to me zebras (it was working fine on
0.1.9 firmw)
http://www.youtube.com/watch?v=nN5gFXWWSqM
thanks I hope that help for a fix
cristian paradiso
Dec 21, 2010, 8:28:56 AM12/21/10
to Magic Lantern firmware development
Oh sorry I forgot The [ML][550d] apologies
On Dec 21, 1:25 pm, cristian paradiso <guit...@yahoo.it> wrote:
> Hi All, the ML it's wonderful but I want to point out few things. 1;
> zebra issue. I have an external monitor and zebras are not working
> properly pixel all around the screen with no sense, if I unplug the
> monitor it goes normal on the camera screen( I had the previous
> version the 0.1.9 and it was working fine) 2: when you take the
> histogram off you still can see the gray box on the side as it is been
> moved only all on the right but still there. this video shows those 2
> things. last thing what is that percentage for? the one next to the
> camera lens data? thanks. Anyway things look weird on an external
> monitor some time gray lines are thicker sometime thinner etc..could
> be my cheap monitor, I dont know if a dp6 hdsmall would do it as well.
> anyone had tried with good monitors? My ext monitor will show the
> image squeezed even without ML that could be a reason as well and it
> is not connected hdmi
>
> 1;this video you can see an extra gray line on the top and only one
> audio signal as the other one it's gone due to my monitor not centered
> compared to the camera monitorhttp://www.youtube.com/watch?v=JHKLFfRvVws
>
> 2: this is the histogram issuehttp://www.youtube.com/watch?v=SmAdU6lTwMc
On Dec 21, 1:25 pm, cristian paradiso <guit...@yahoo.it> wrote:
> Hi All, the ML it's wonderful but I want to point out few things. 1;
> zebra issue. I have an external monitor and zebras are not working
> properly pixel all around the screen with no sense, if I unplug the
> monitor it goes normal on the camera screen( I had the previous
> version the 0.1.9 and it was working fine) 2: when you take the
> histogram off you still can see the gray box on the side as it is been
> moved only all on the right but still there. this video shows those 2
> things. last thing what is that percentage for? the one next to the
> camera lens data? thanks. Anyway things look weird on an external
> monitor some time gray lines are thicker sometime thinner etc..could
> be my cheap monitor, I dont know if a dp6 hdsmall would do it as well.
> anyone had tried with good monitors? My ext monitor will show the
> image squeezed even without ML that could be a reason as well and it
> is not connected hdmi
>
> 1;this video you can see an extra gray line on the top and only one
> audio signal as the other one it's gone due to my monitor not centered
>
> 2: this is the histogram issuehttp://www.youtube.com/watch?v=SmAdU6lTwMc
>
> 3: this is the most annoying to me zebras (it was working fine on
> 0.1.9 firmw)http://www.youtube.com/watch?v=nN5gFXWWSqM
> 3: this is the most annoying to me zebras (it was working fine on
M-L-Userrr
Dec 21, 2010, 8:51:31 AM12/21/10
to Magic Lantern firmware development
press menu button on cam twice and leftovers will disappear
Alex
Dec 21, 2010, 9:05:51 AM12/21/10
to ml-d...@googlegroups.com
I don't have any HDMI device to test (but I won't refuse one :D )
I can try to fix HDMI issues offline, but there's no guarantee.
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to ml-devel+u...@googlegroups.com
> For more options, visit this group at http://groups.google.com/group/ml-devel?hl=en
cristian paradiso
Dec 21, 2010, 9:09:41 AM12/21/10
to ml-d...@googlegroups.com
My monitor is not hdmi, normal one standard definition
Da: Alex <broscu...@gmail.com>
A: ml-d...@googlegroups.com
Inviato: Mar 21 dicembre 2010, 14:05:51
Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
Da: Alex <broscu...@gmail.com>
A: ml-d...@googlegroups.com
Inviato: Mar 21 dicembre 2010, 14:05:51
Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
> To unsubscribe from
this group, send email to ml-devel+unsub...@googlegroups.com
> For more options, visit this group at http://groups.google.com/group/ml-devel?hl=en
--
http://magiclantern.wikia.com/
To post to this group, send email to ml-d...@googlegroups.com
To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
Alex
Dec 21, 2010, 9:09:48 AM12/21/10
to ml-d...@googlegroups.com
> it was working fine on 0.1.9 firmw
In which build?On Tue, Dec 21, 2010 at 3:51 PM, M-L-Userrr <justyna...@gmail.com> wrote:
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to ml-devel+u...@googlegroups.com
Alex
Dec 21, 2010, 9:11:19 AM12/21/10
to ml-d...@googlegroups.com
Please use normal sized fonts.
>> ml-devel+u...@googlegroups.com
>> For more options, visit this group at
>> http://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
Cristian
Dec 21, 2010, 9:30:01 AM12/21/10
to ml-d...@googlegroups.com
Where?i havent use any font size,just wrote it normally
Sent from my iPhone
Alex
Dec 21, 2010, 9:29:54 AM12/21/10
to ml-d...@googlegroups.com
I've received a huge font (something like 20 or 30pt). Want a screenshot?
In which build was zebra working OK on your monitor?
M-L-Userrr
Dec 21, 2010, 9:38:19 AM12/21/10
to Magic Lantern firmware development
I can confirm that,zebra is messed up (a lot of rectangles insted of
zebra)using usb video out and histogram is shifted a bit to the right
too much.
On 21 Gru, 15:29, Alex <broscutama...@gmail.com> wrote:
> I've received a huge font (something like 20 or 30pt). Want a screenshot?
>
> In which build was zebra working OK on your monitor?
>
>
>
> On Tue, Dec 21, 2010 at 4:30 PM, Cristian <guit...@yahoo.it> wrote:
> > Where?i havent use any font size,just wrote it normally
>
> > Sent from my iPhone
>
> >> For more options, visit this group athttp://groups.google.com/group/ml-devel?hl=en
zebra)using usb video out and histogram is shifted a bit to the right
too much.
On 21 Gru, 15:29, Alex <broscutama...@gmail.com> wrote:
> I've received a huge font (something like 20 or 30pt). Want a screenshot?
>
> In which build was zebra working OK on your monitor?
>
>
>
> On Tue, Dec 21, 2010 at 4:30 PM, Cristian <guit...@yahoo.it> wrote:
> > Where?i havent use any font size,just wrote it normally
>
> > Sent from my iPhone
>
> > On 21 Dec 2010, at 14:11, Alex <broscutama...@gmail.com> wrote:
>
> >> Please use normal sized fonts.
>
>
> >> Please use normal sized fonts.
>
> >> On Tue, Dec 21, 2010 at 4:09 PM, cristian paradiso <guit...@yahoo.it> wrote:
> >>> My monitor is not hdmi, normal one standard definition
> >>> ________________________________
> >>> Da: Alex <broscutama...@gmail.com>
> >>> My monitor is not hdmi, normal one standard definition
> >>> ________________________________
> >>> A: ml-d...@googlegroups.com
> >>> Inviato: Mar 21 dicembre 2010, 14:05:51
> >>> Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
>
> >>> I don't have any HDMI device to test (but I won't refuse one :D )
>
> >>> I can try to fix HDMI issues offline, but there's no guarantee.
>
> >>> On Tue, Dec 21, 2010 at 3:51 PM, M-L-Userrr <justynadric...@gmail.com>
> >>> Inviato: Mar 21 dicembre 2010, 14:05:51
> >>> Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
>
> >>> I don't have any HDMI device to test (but I won't refuse one :D )
>
> >>> I can try to fix HDMI issues offline, but there's no guarantee.
>
Alex
Dec 21, 2010, 9:42:38 AM12/21/10
to ml-d...@googlegroups.com
I did not use any external monitor so far. Can anyone give me a quick
introduction to this?
i.e.
1) can I connect it to a standard TV set or PC monitor?
2) I see there 2 connectors. One is HD and other SD?
introduction to this?
i.e.
1) can I connect it to a standard TV set or PC monitor?
2) I see there 2 connectors. One is HD and other SD?
( I don't have the cables here to check what's at the other end )
M-L-Userrr
Dec 21, 2010, 9:45:09 AM12/21/10
to Magic Lantern firmware development
Its on the latest build ,the one with setting for menu button
https://mail.google.com/mail/?ui=2&ik=2636480986&view=att&th=12d058f190fce389&attid=0.1&disp=attd&realattid=f_ghxucqn01&zw
I can check older versions if you want ?
https://mail.google.com/mail/?ui=2&ik=2636480986&view=att&th=12d058f190fce389&attid=0.1&disp=attd&realattid=f_ghxucqn01&zw
I can check older versions if you want ?
M-L-Userrr
Dec 21, 2010, 9:46:42 AM12/21/10
to Magic Lantern firmware development
Yes ,the one with mini USB socket its the one im using on my regular
TV and i see the problems with zebras and with shifted histogram
On 21 Gru, 15:45, M-L-Userrr <justynadric...@gmail.com> wrote:
> Its on the latest build ,the one with setting for menu button
>
> https://mail.google.com/mail/?ui=2&ik=2636480986&view=att&th=12d058f1...
TV and i see the problems with zebras and with shifted histogram
On 21 Gru, 15:45, M-L-Userrr <justynadric...@gmail.com> wrote:
> Its on the latest build ,the one with setting for menu button
>
M-L-Userrr
Dec 21, 2010, 9:51:51 AM12/21/10
to Magic Lantern firmware development
Problems is not in your latest versions Alex ,it existed in
magiclantern-2010dec16.550d.fw109.PRERELEASE.a1ex.zip
I dont have eariler versions but i can test them if you will give me
links.I deleted settings to be sure if they arent overwriting
something and not giving prblems and they arent.
magiclantern-2010dec16.550d.fw109.PRERELEASE.a1ex.zip
I dont have eariler versions but i can test them if you will give me
links.I deleted settings to be sure if they arent overwriting
something and not giving prblems and they arent.
Alex
Dec 21, 2010, 9:55:45 AM12/21/10
to ml-d...@googlegroups.com
Can you do these steps quickly?
1. Start the camera in LV mode
2. Connect the external monitor
3. Disconnect the external monitor
4. ML menu -> Debug -> Dump dmlog
5. Wait until the red light goes off
6. On your card, you'll find one LOG file. Send it to me.
If you don't do them quick enough, the log file will have the first
entries missing (i.e. won't start from line 1). Be sure to turn face
detection off before doing that.
cristian paradiso
Dec 21, 2010, 9:59:39 AM12/21/10
to ml-d...@googlegroups.com
sorry i put the previous again and it didnt work either :( but it was definetely working before
Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
> To unsubscribe from
this group, send email to ml-devel+unsub...@googlegroups.com
> For more options, visit this group at http://groups.google.com/group/ml-devel?hl=en
--
http://magiclantern.wikia.com/
To post to this group, send email to ml-d...@googlegroups.com
To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
M-L-Userrr
Dec 21, 2010, 10:02:31 AM12/21/10
to Magic Lantern firmware development
Find the version that worked ,it will help a lot,post here link to
this version
On 21 Gru, 15:59, cristian paradiso <guit...@yahoo.it> wrote:
> sorry i put the previous again and it didnt work either :( but it was
> definetely working before
>
> ________________________________
> Da: Alex <broscutama...@gmail.com>
> >ml-devel+u...@googlegroups.com
> --http://magiclantern.wikia.com/
this version
On 21 Gru, 15:59, cristian paradiso <guit...@yahoo.it> wrote:
> sorry i put the previous again and it didnt work either :( but it was
> definetely working before
>
> ________________________________
> --http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
cristian paradiso
Dec 21, 2010, 10:04:00 AM12/21/10
to ml-d...@googlegroups.com
yes I had a previous version called pre-realease and it was working on my monitor as well as the camera monitor, but now I put in the previous version again it does not working anymore
Inviato: Mar 21 dicembre 2010, 14:29:54
>>>> ml-devel+unsub...@googlegroups.com
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/ml-devel?hl=en
>>>
>>> --
>>> http://magiclantern.wikia.com/
>>>
>>> To post to this group, send email to ml-d...@googlegroups.com
>>> To unsubscribe from this group, send email to
>>> ml-devel+unsub...@googlegroups.com
>>> For more options, visit this group at
>>> http://groups.google.com/group/ml-devel?hl=en
>>>
>>> --
>>> http://magiclantern.wikia.com/
>>>
>>> To post to this group, send email to ml-d...@googlegroups.com
>>> To unsubscribe from this group, send email to
>>> ml-devel+unsub...@googlegroups.com
>>> For more options, visit this group at
>>> http://groups.google.com/group/ml-devel?hl=en
>>
>> --
>> http://magiclantern.wikia.com/
>>
>> To post to this group, send email to ml-d...@googlegroups.com
>> To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
>> For more options, visit this group at http://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
> For more options, visit this group at http://groups.google.com/group/ml-devel?hl=en
--
http://magiclantern.wikia.com/
To post to this group, send email to ml-d...@googlegroups.com
To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
M-L-Userrr
Dec 21, 2010, 10:07:57 AM12/21/10
to Magic Lantern firmware development
Are you 100% sure it was working ? I have 7 versions with the same
problem
On 21 Gru, 16:04, cristian paradiso <guit...@yahoo.it> wrote:
> yes I had a previous version called pre-realease and it was working on my
> monitor as well as the camera monitor, but now I put in the previous version
> again it does not working anymore
>
> ________________________________
> Da: Alex <broscutama...@gmail.com>
> >>>> ml-devel+u...@googlegroups.com
> --http://magiclantern.wikia.com/
problem
On 21 Gru, 16:04, cristian paradiso <guit...@yahoo.it> wrote:
> yes I had a previous version called pre-realease and it was working on my
> monitor as well as the camera monitor, but now I put in the previous version
> again it does not working anymore
>
> ________________________________
> A: ml-d...@googlegroups.com
> Inviato: Mar 21 dicembre 2010, 14:29:54
> Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
>
> I've received a huge font (something like 20 or 30pt). Want a screenshot?
>
> In which build was zebra working OK on your monitor?
>
>
>
>
>
> On Tue, Dec 21, 2010 at 4:30 PM, Cristian <guit...@yahoo.it> wrote:
> > Where?i havent use any font size,just wrote it normally
>
> > Sent from my iPhone
>
> Inviato: Mar 21 dicembre 2010, 14:29:54
> Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
>
> I've received a huge font (something like 20 or 30pt). Want a screenshot?
>
> In which build was zebra working OK on your monitor?
>
>
>
>
>
> On Tue, Dec 21, 2010 at 4:30 PM, Cristian <guit...@yahoo.it> wrote:
> > Where?i havent use any font size,just wrote it normally
>
> > Sent from my iPhone
>
> > On 21 Dec 2010, at 14:11, Alex <broscutama...@gmail.com> wrote:
>
> >> Please use normal sized fonts.
>
>
> >> Please use normal sized fonts.
>
> >> On Tue, Dec 21, 2010 at 4:09 PM, cristian paradiso <guit...@yahoo.it> wrote:
> >>> My monitor is not hdmi, normal one standard definition
> >>> ________________________________
> >>> Da: Alex <broscutama...@gmail.com>
> >>> My monitor is not hdmi, normal one standard definition
> >>> ________________________________
> >>> A: ml-d...@googlegroups.com
> >>> Inviato: Mar 21 dicembre 2010, 14:05:51
> >>> Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
>
> >>> I don't have any HDMI device to test (but I won't refuse one :D )
>
> >>> I can try to fix HDMI issues offline, but there's no guarantee.
>
> >>> On Tue, Dec 21, 2010 at 3:51 PM, M-L-Userrr <justynadric...@gmail.com>
> >>> Inviato: Mar 21 dicembre 2010, 14:05:51
> >>> Oggetto: Re: [ML] Re: Some issue there, check it out on my videos
>
> >>> I don't have any HDMI device to test (but I won't refuse one :D )
>
> >>> I can try to fix HDMI issues offline, but there's no guarantee.
>
> >>>> For more options, visit this group at
> >>>>http://groups.google.com/group/ml-devel?hl=en
>
> >>> --
> >>>http://magiclantern.wikia.com/
>
> >>> To post to this group, send email to ml-d...@googlegroups.com
> >>> To unsubscribe from this group, send email to
> >>> ml-devel+u...@googlegroups.com
> >>>>http://groups.google.com/group/ml-devel?hl=en
>
> >>> --
> >>>http://magiclantern.wikia.com/
>
> >>> To post to this group, send email to ml-d...@googlegroups.com
> >>> To unsubscribe from this group, send email to
> >>> For more options, visit this group at
> >>>http://groups.google.com/group/ml-devel?hl=en
>
> >>> --
> >>>http://magiclantern.wikia.com/
>
> >>> To post to this group, send email to ml-d...@googlegroups.com
> >>> To unsubscribe from this group, send email to
> >>> ml-devel+u...@googlegroups.com
> >>>http://groups.google.com/group/ml-devel?hl=en
>
> >>> --
> >>>http://magiclantern.wikia.com/
>
> >>> To post to this group, send email to ml-d...@googlegroups.com
> >>> To unsubscribe from this group, send email to
> >>> For more options, visit this group at
> >>>http://groups.google.com/group/ml-devel?hl=en
>
> >> --
> >>http://magiclantern.wikia.com/
>
> >> To post to this group, send email to ml-d...@googlegroups.com
> >> To unsubscribe from this group, send email to
> >>ml-devel+u...@googlegroups.com
> >>>http://groups.google.com/group/ml-devel?hl=en
>
> >> --
> >>http://magiclantern.wikia.com/
>
> >> To post to this group, send email to ml-d...@googlegroups.com
> >> To unsubscribe from this group, send email to
> >> For more options, visit this group at
> >>http://groups.google.com/group/ml-devel?hl=en
>
> > --
> >http://magiclantern.wikia.com/
>
> > To post to this group, send email to ml-d...@googlegroups.com
> > To unsubscribe from this group, send email to
> >ml-devel+u...@googlegroups.com
> >>http://groups.google.com/group/ml-devel?hl=en
>
> > --
> >http://magiclantern.wikia.com/
>
> > To post to this group, send email to ml-d...@googlegroups.com
> > To unsubscribe from this group, send email to
> --http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
cristian paradiso
Dec 21, 2010, 10:16:38 AM12/21/10
to Magic Lantern firmware development
sorry I've just realised that things look even worst if connect it to
a hdmi tv/monitor. crops, zebras, centering of frame, it is a big mess
unfortunately. only on camera works fine.
see this:
http://www.flickr.com/photos/guitcry/5279936147/
http://www.flickr.com/photos/guitcry/5279942693/
a hdmi tv/monitor. crops, zebras, centering of frame, it is a big mess
unfortunately. only on camera works fine.
see this:
http://www.flickr.com/photos/guitcry/5279936147/
http://www.flickr.com/photos/guitcry/5279942693/
cristian paradiso
Dec 21, 2010, 10:18:47 AM12/21/10
to ml-d...@googlegroups.com
as i said the version which was working is not longer working
Da: M-L-Userrr <justyna...@gmail.com>
A: Magic Lantern firmware development <ml-d...@googlegroups.com>
Inviato: Mar 21 dicembre 2010, 15:02:31
Oggetto: [ML] Re: Some issue there, check it out on my videos
>
>ml-devel+unsub...@googlegroups.com
> > For more options, visit this group at
> >http://groups.google.com/group/ml-devel?hl=en
>
> --http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+unsub...@googlegroups.com
To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
cristian paradiso
Dec 21, 2010, 10:20:11 AM12/21/10
to ml-d...@googlegroups.com
Now you're raising some doubts, i'll say 80percent sure.
Da: M-L-Userrr <justyna...@gmail.com>
A: Magic Lantern firmware development <ml-d...@googlegroups.com>
Inviato: Mar 21 dicembre 2010, 15:07:57
Oggetto: [ML] Re: Some issue there, check it out on my videos
> >>>> ml-devel+unsub...@googlegroups.com
> >>>> For more options, visit this group at
> >>>>http://groups.google.com/group/ml-devel?hl=en
>
> >>> --
> >>>http://magiclantern.wikia.com/
>
> >>> To post to this group, send email to ml-d...@googlegroups.com
> >>> To unsubscribe from this group, send email to
> >>> ml-devel+unsub...@googlegroups.com
> >>> For more options, visit this group at
> >>>http://groups.google.com/group/ml-devel?hl=en
>
> >>> --
> >>>http://magiclantern.wikia.com/
>
> >>> To post to this group, send email to ml-d...@googlegroups.com
> >>> To unsubscribe from this group, send email to
> >>> ml-devel+unsub...@googlegroups.com
> >>> For more options, visit this group at
> >>>http://groups.google.com/group/ml-devel?hl=en
>
> >> --
> >>http://magiclantern.wikia.com/
>
> >> To post to this group, send email to ml-d...@googlegroups.com
> >> To unsubscribe from this group, send email to
> >>ml-devel+unsub...@googlegroups.com
> >> For more options, visit this group at
> >>http://groups.google.com/group/ml-devel?hl=en
>
> > --
> >http://magiclantern.wikia.com/
>
> > To post to this group, send email to ml-d...@googlegroups.com
> > To unsubscribe from this group, send email to
> >ml-devel+unsub...@googlegroups.com
> > For more options, visit this group at
> >http://groups.google.com/group/ml-devel?hl=en
>
> --http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+unsub...@googlegroups.com
To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
Alex
Dec 21, 2010, 10:20:45 AM12/21/10
to ml-d...@googlegroups.com
What resolution does your hdmi monitor have?
>> >ml-devel+u...@googlegroups.com
>> > For more options, visit this group at
>> >http://groups.google.com/group/ml-devel?hl=en
>>
>> --http://magiclantern.wikia.com/
>>
>> To post to this group, send email to ml-d...@googlegroups.com
>> To unsubscribe from this group, send email to
>> ml-devel+u...@googlegroups.com
>> For more options, visit this group
>> athttp://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
cristian paradiso
Dec 21, 2010, 10:24:23 AM12/21/10
to ml-d...@googlegroups.com
it is a HD not a full HD
>> >ml-devel+unsub...@googlegroups.com
>> > For more options, visit this group at
>> >http://groups.google.com/group/ml-devel?hl=en
>>
>> --http://magiclantern.wikia.com/
>>
>> To post to this group, send email to ml-d...@googlegroups.com
>> To unsubscribe from this group, send email to
>> ml-devel+unsub...@googlegroups.com
>> For more options, visit this group
>> athttp://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+unsub...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+unsub...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/ml-devel?hl=en
--
http://magiclantern.wikia.com/
To post to this group, send email to ml-d...@googlegroups.com
To unsubscribe from this group, send email to ml-devel+unsub...@googlegroups.com
Alex
Dec 21, 2010, 10:26:11 AM12/21/10
to ml-d...@googlegroups.com
I'm beginner in the HD world... that's why I'm asking.
>>> >ml-devel+u...@googlegroups.com
>>> > For more options, visit this group at
>>> >http://groups.google.com/group/ml-devel?hl=en
>>>
>>> --http://magiclantern.wikia.com/
>>>
>>> To post to this group, send email to ml-d...@googlegroups.com
>>> To unsubscribe from this group, send email to
>>> ml-devel+u...@googlegroups.com
>>> For more options, visit this group
>>> athttp://groups.google.com/group/ml-devel?hl=en
>>
>> --
>> http://magiclantern.wikia.com/
>>
>> To post to this group, send email to ml-d...@googlegroups.com
>> To unsubscribe from this group, send email to
>> ml-devel+u...@googlegroups.com
>> For more options, visit this group at
>> http://groups.google.com/group/ml-devel?hl=en
>>
>> --
>> http://magiclantern.wikia.com/
>>
>> To post to this group, send email to ml-d...@googlegroups.com
>> To unsubscribe from this group, send email to
>> ml-devel+u...@googlegroups.com
>> For more options, visit this group at
>> http://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/ml-devel?hl=en
>
> --
> http://magiclantern.wikia.com/
>
> To post to this group, send email to ml-d...@googlegroups.com
> To unsubscribe from this group, send email to
> ml-devel+u...@googlegroups.com
cristian paradiso
Dec 21, 2010, 10:26:36 AM12/21/10
to ml-d...@googlegroups.com
sorry the pictures(flickr) come from a hd tv, the videos(youtube)come from a sd 5inch monitor i think it is 800x600pixel
Da: cristian paradiso <gui...@yahoo.it>
A: ml-d...@googlegroups.com
Inviato: Mar 21 dicembre 2010, 15:24:23
Da: cristian paradiso <gui...@yahoo.it>
A: ml-d...@googlegroups.com
Inviato: Mar 21 dicembre 2010, 15:24:23
To unsubscribe from this group, send email to ml-devel+u...@googlegroups.com
Ba...@aol.com
Dec 21, 2010, 11:55:32 AM12/21/10
to ml-d...@googlegroups.com
This problem also exists on the 5d version, too, and was never
corrected, to my knowledge.
Piers
Dec 21, 2010, 3:28:17 PM12/21/10
to ml-d...@googlegroups.com
My understanding is that the HDMI is always 960 Px across - so none of our rendering will work properly (and fixing it is not something I'd consider a priority quite yet).
The A/V out I would have assumed was the same Res as the LCD (720x480 is D1 NTSC), and even if the camera was outputting PAL, that's just a taller bitmap, so I would not have expected differences. I'll have to take a look.
Piers
Dec 21, 2010, 3:37:42 PM12/21/10
to ml-d...@googlegroups.com
Regarding the audio waveform not being shown - see if your monitor has an underscan option (all pro monitors used to have "underscan", but these days consumer monitors will often have it, but with some crazy other word specific to the manufacturer. On my samsung it's included along with the 4:3, 16:9, 4:3 zoom, etc picture size options.. they might have called it "just scan").
If we move the meters down to accomodate overscanned external monitors, they'll be too far into the main picture on the viewfinder. Of course you could compile your own..
PG
Antony Newman
Dec 21, 2010, 4:09:53 PM12/21/10
to ml-d...@googlegroups.com
PG,
I have kept my test programs independent of the ML code (I don't want to effect the ML codes stability).
As far as I know, the Vram addresses (that ML use) are constant, and the vram screen is not blanked out before each update.
And so I've avoiding trying to get the very latest vram parameters each call (which may be several thousand times a second)
Instead, I request that the that these are checked every second or so, and store the values globally.
I've copied this code below this email.
+) I have not 100% tested these in all scenarios - but I think they worked for HD-HDMI, 480p and the LCD screen.
+) I know that the VRAM details used here do not apply to all VRAM screen buffers.
Once I have found the structures that determine dimensions of these buffers (which might be the 'Vram_objects' in TH's code),
I will rewrite this routine with a matrix for all the Vram segments (This is not high priority)
Regards,
AJ
.
/****************************************************************************
* aj_update_vram_n_bmp_global_varables() *
* *
* Should be called when g_update_vram_n_bmp = 1 *
* *
* Returns: 0 = FAILED to get video variables *
* 1 = SUCCESS *
* *
****************************************************************************/
unsigned int aj_update_vram_n_bmp_global_varables()
{
g_vram_bank = vram_get_number(2);
struct vram_info *vram = &vram_info[ g_vram_bank ]; // raw Vram bank 0 or 1
/*************************************************************************
* This global variable is set to 1 to indicate that update is required *
* It may already be one, but in the event of failed, this ensures that *
* the routine will be called again .. and again by the aj routines *
* until stablised (ie DryOs has stabilised) *
*************************************************************************/
g_update_vram_n_bmp = 1; // Set flag to say "Update required"
// aj routines can use this to determine if
// its ok to us Global variables
g_bmp_base_addr = (unsigned int) bmp_vram();
if ( (g_bmp_base_addr == 0) || ( (g_bmp_base_addr & 3) > 0) )
{
return( 0 ); // Failed to define global vars - don't use aj_lib!
}
/*****************************************************************
* Ok - we are in the clear - we can use the aj graphics lib() *
*****************************************************************/
g_vram_base_addr = (unsigned int) vram->vram;
g_vram_pitch = vram->pitch; /* [HD] 1920 [STD] 960 */
g_vram_width = vram->width; /* [HD] 1920 [STD] 720 */
g_vram_height = vram->height; /* [HD] 1080 [STD] 480 [0..424 used] */
g_vram_bytes_per_line = g_vram_pitch *2; // Each vram pixel is 16 bits (2 bytes)
if ( g_vram_pitch == 1920) /* HD mode */
{
g_bmp_pitch = 960;
g_bmp_width = 960; // [HD] is 960 x 540 pixels for HDMI display
g_bmp_height = 540;
}
else /* This is STD mode */
{
g_bmp_pitch = 960;
g_bmp_width = 720; // [STD] is 720 x 480 pixels for display
g_bmp_height = 480; // When recording, HD Output is is changed to STD
}
/**********************************************************************
* Set global variable to Zero ... no updates required *
* Note when hotplug of HDMI HD - it is necessary to change this *
* back to 1 to get the new mode. A quick an easy way to do this is *
* Simply to call this routine every few secs *
**********************************************************************/
g_update_vram_n_bmp = 0;
return( 1 );
} /* end of aj_update_vram_n_bmp_global_varables() */
I have kept my test programs independent of the ML code (I don't want to effect the ML codes stability).
As far as I know, the Vram addresses (that ML use) are constant, and the vram screen is not blanked out before each update.
And so I've avoiding trying to get the very latest vram parameters each call (which may be several thousand times a second)
Instead, I request that the that these are checked every second or so, and store the values globally.
I've copied this code below this email.
+) I have not 100% tested these in all scenarios - but I think they worked for HD-HDMI, 480p and the LCD screen.
+) I know that the VRAM details used here do not apply to all VRAM screen buffers.
Once I have found the structures that determine dimensions of these buffers (which might be the 'Vram_objects' in TH's code),
I will rewrite this routine with a matrix for all the Vram segments (This is not high priority)
Regards,
AJ
.
/****************************************************************************
* aj_update_vram_n_bmp_global_varables() *
* *
* Should be called when g_update_vram_n_bmp = 1 *
* *
* Returns: 0 = FAILED to get video variables *
* 1 = SUCCESS *
* *
****************************************************************************/
unsigned int aj_update_vram_n_bmp_global_varables()
{
g_vram_bank = vram_get_number(2);
struct vram_info *vram = &vram_info[ g_vram_bank ]; // raw Vram bank 0 or 1
/*************************************************************************
* This global variable is set to 1 to indicate that update is required *
* It may already be one, but in the event of failed, this ensures that *
* the routine will be called again .. and again by the aj routines *
* until stablised (ie DryOs has stabilised) *
*************************************************************************/
g_update_vram_n_bmp = 1; // Set flag to say "Update required"
// aj routines can use this to determine if
// its ok to us Global variables
g_bmp_base_addr = (unsigned int) bmp_vram();
if ( (g_bmp_base_addr == 0) || ( (g_bmp_base_addr & 3) > 0) )
{
return( 0 ); // Failed to define global vars - don't use aj_lib!
}
/*****************************************************************
* Ok - we are in the clear - we can use the aj graphics lib() *
*****************************************************************/
g_vram_base_addr = (unsigned int) vram->vram;
g_vram_pitch = vram->pitch; /* [HD] 1920 [STD] 960 */
g_vram_width = vram->width; /* [HD] 1920 [STD] 720 */
g_vram_height = vram->height; /* [HD] 1080 [STD] 480 [0..424 used] */
g_vram_bytes_per_line = g_vram_pitch *2; // Each vram pixel is 16 bits (2 bytes)
if ( g_vram_pitch == 1920) /* HD mode */
{
g_bmp_pitch = 960;
g_bmp_width = 960; // [HD] is 960 x 540 pixels for HDMI display
g_bmp_height = 540;
}
else /* This is STD mode */
{
g_bmp_pitch = 960;
g_bmp_width = 720; // [STD] is 720 x 480 pixels for display
g_bmp_height = 480; // When recording, HD Output is is changed to STD
}
/**********************************************************************
* Set global variable to Zero ... no updates required *
* Note when hotplug of HDMI HD - it is necessary to change this *
* back to 1 to get the new mode. A quick an easy way to do this is *
* Simply to call this routine every few secs *
**********************************************************************/
g_update_vram_n_bmp = 0;
return( 1 );
} /* end of aj_update_vram_n_bmp_global_varables() */
Cristian
Dec 21, 2010, 6:01:31 PM12/21/10
to ml-d...@googlegroups.com
Sorry for my ignorance, where do you copy that code to?? I totally have no idea. Could you put it in a new firmware please? That would be very much appreciated. Tha ks
Sent from my iPhone
Sent from my iPhone
--
Antony Newman
Dec 21, 2010, 7:06:00 PM12/21/10
to ml-d...@googlegroups.com
Christian,
I have an experimental collection of test routines, of which 99% should not be in ML.
The ealier routine (aj_update_vram_n_bmp_global_varables()) is not compatible with ML, but is used my experimental routines .
In this I setup screen sizes - which may be missing from the ML code.
Rather than make ML unstable - I think it would be prudent to keep things separate until there is a tangible benefit in using any of my code.
Regards,
AJ.
I have an experimental collection of test routines, of which 99% should not be in ML.
The ealier routine (aj_update_vram_n_bmp_global_varables()) is not compatible with ML, but is used my experimental routines .
In this I setup screen sizes - which may be missing from the ML code.
Rather than make ML unstable - I think it would be prudent to keep things separate until there is a tangible benefit in using any of my code.
Regards,
AJ.
cacasodo
Dec 22, 2010, 9:55:24 AM12/22/10
to Magic Lantern firmware development
Guys,
I'm a 5D user listening in on the conversation. I just wanted to add
that as stated by M-L-Userrr that the HDMI issue on ML 0.1.9 exists
for the 5D as well. I encountered it over the weekend. The display
on the connected HDMI monitor blinks/freezes at times/is generally
squirrely. As well, there seems to be some sort of conflict with the
HDMI output and setting the qscale parameter. In short, recordings
stop and/or audio sync is ruined when an external display is hooked up
to the Canon's HDMI port for monitoring. When no HDMI monitor is
connected to the cam, the problem is not present. More here:
http://groups.google.com/group/ml-devel/browse_thread/thread/9ab24a6168d3f14e/ab6f78a0f520993b?#ab6f78a0f520993b
I'm not asking anyone to do anything about this. I'm just reporting
confirmation of a problem with HDMI monitoring.
'sodo
I'm a 5D user listening in on the conversation. I just wanted to add
that as stated by M-L-Userrr that the HDMI issue on ML 0.1.9 exists
for the 5D as well. I encountered it over the weekend. The display
on the connected HDMI monitor blinks/freezes at times/is generally
squirrely. As well, there seems to be some sort of conflict with the
HDMI output and setting the qscale parameter. In short, recordings
stop and/or audio sync is ruined when an external display is hooked up
to the Canon's HDMI port for monitoring. When no HDMI monitor is
connected to the cam, the problem is not present. More here:
http://groups.google.com/group/ml-devel/browse_thread/thread/9ab24a6168d3f14e/ab6f78a0f520993b?#ab6f78a0f520993b
I'm not asking anyone to do anything about this. I'm just reporting
confirmation of a problem with HDMI monitoring.
'sodo
Reply all
Reply to author
Forward
0 new messages